Nissan Frontier. Instruction — part 1018
MWI-16
< SYSTEM DESCRIPTION >
METER SYSTEM
VOLTAGE GAUGE : Component Description
INFOID:0000000009480336
ODO/TRIP METER
ODO/TRIP METER : System Diagram
INFOID:0000000009480337
ODO/TRIP METER : System Description
INFOID:0000000009480338
The vehicle speed signal and the memory signals from the meter memory circuit are processed by the combi-
nation meter and the mileage is displayed.
LOOSE FUEL CAP WARNING
The LOOSE FUEL CAP indicator will display in the odometer when the fuel-filler cap is not tightened correctly.
The indicator will turn off as soon as the ECM detects the fuel-filler cap is properly tightened. The ECM pro-
vides a loose fuel cap signal to the combination meter via CAN communication lines.
CHECK TIRE PRESSURE WARNING
The CHECK TIRE PRESSURE indicator will display in the odometer when BCM has detected a low tire pres-
sure condition.
HOW TO CHANGE THE DISPLAY FOR ODO/TRIP METER
Refer to Owner's Instruction for odo/trip meter operating instructions.
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E8 (with VQ40DE for Mexico)
E16 (with QR25DE)
E55 (with VQ40DE except Mexico)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit) E127
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with
QR25DE) (view with engine re-
moved)
7.
A/T assembly F9 (with A/T)
8.
BCM M18, M19 (view with lower instru-
ment panel LH removed)
9.
IPDM E/R E122, E124
Unit
Description
Combination meter
Indicates the battery voltage according to the voltage signal received from the fuse block (J/B).
Fuse block (J/B)
Transmits the battery voltage signal to the combination meter.
AWNIA0005GB
MWI
METER SYSTEM
MWI-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ODO/TRIP METER : Component Parts Location
INFOID:0000000009480339
ODO/TRIP METER : Component Description
INFOID:0000000009480340
SHIFT POSITION INDICATOR
AWNIA0781ZZ
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E8 (with VQ40DE for Mexico)
E16 (with QR25DE)
E55 (with VQ40DE except Mexico)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit) E127
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with
QR25DE) (view with engine re-
moved)
7.
A/T assembly F9 (with A/T)
8.
BCM M18, M19 (view with lower instru-
ment panel LH removed)
9.
IPDM E/R E122, E124
Unit
Description
Combination meter
Converts the vehicle speed signal received from the ABS actuator and electric unit (control unit) via
CAN communication to mileage, and it displays the accumulated mileage to the odo/trip meter.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
MWI-18
< SYSTEM DESCRIPTION >
METER SYSTEM
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000009480341
SHIFT POSITION INDICATOR : System Description
INFOID:0000000009480342
The TCM receives A/T indicator signals from the transmission range switch. The TCM then sends A/T position
indicator signals to the combination meter via CAN communication lines. The combination meter indicates the
received shift position.
SHIFT POSITION INDICATOR : Component Parts Location
INFOID:0000000009480343
AWNIA3309GB
AWNIA0781ZZ
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E8 (with VQ40DE for Mexico)
E16 (with QR25DE)
E55 (with VQ40DE except Mexico)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit) E127
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with
QR25DE) (view with engine re-
moved)
7.
A/T assembly F9 (with A/T)
8.
BCM M18, M19 (view with lower instru-
ment panel LH removed)
9.
IPDM E/R E122, E124
MWI
METER SYSTEM
MWI-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT POSITION INDICATOR : Component Description
INFOID:0000000009480344
WARNING LAMPS/INDICATOR LAMPS
WARNING LAMPS/INDICATOR LAMPS : System Diagram
INFOID:0000000009480345
WARNING LAMPS/INDICATOR LAMPS : System Description
INFOID:0000000009480346
OIL PRESSURE WARNING LAMP
• IPDM E/R reads the ON/OFF signals from the oil pressure switch and transmits the oil pressure switch sig-
nal to the combination meter via BCM with the CAN communication line.
• The combination meter turns the oil pressure warning lamp ON/OFF according to the oil pressure switch sig-
nal received via CAN communication.
WARNING LAMPS/INDICATOR LAMPS : Component Parts Location
INFOID:0000000009480347
Unit
Description
Combination meter
Displays the shift position using shift position signal received from TCM.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
JSNIA0449GB
AWNIA0781ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст