Nissan Frontier. Instruction — part 341
DLN-266
< SERVICE DATA AND SPECIFICATIONS (SDS)
[REAR FINAL DRIVE: M226 ]
SERVICE DATA AND SPECIFICATIONS (SDS)
Item
Runout limit
Companion flange face
0.13 (0.0051) or less
Companion flange inner side
DIAGNOSIS AND REPAIR WORKFLOW
DLN-267
< BASIC INSPECTION >
[REAR FINAL DRIVE: M226 (ELD) ]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009479811
OVERALL SEQUENCE
DETAILED FLOW
AWEIA0214GB
DLN-268
< BASIC INSPECTION >
[REAR FINAL DRIVE: M226 (ELD) ]
DIAGNOSIS AND REPAIR WORKFLOW
1.
INTERVIEW FOR MALFUNCTION
Interview the customer about the symptom.
>> GO TO 2
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3
3.
BASIC INSPECTION
Check the operation of each part. Check that no symptoms occur other than those specified by the customer.
>> GO TO 4
4.
SELF-DIAGNOSIS WITH CONSULT
Perform the self diagnosis with CONSULT. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5
NO
>> GO TO 6
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 7
6.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 7
7.
MALFUNCTIONING PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 8
8.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
Perform the self diagnosis with CONSULT. Verify that no DTCs are detected. Erase all DTCs detected prior to
the repair. Verify that DTC is not detected again.
Is any DTC detected?
YES
>> GO TO 5
NO
>> GO TO 9
9.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> Inspection End.
NO
>> GO TO 3
DIFFERENTIAL LOCK SYSTEM
DLN-269
< SYSTEM DESCRIPTION >
[REAR FINAL DRIVE: M226 (ELD) ]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
SYSTEM DESCRIPTION
DIFFERENTIAL LOCK SYSTEM
Cross-Sectional View
INFOID:0000000009479812
1.
Companion flange
2.
Drive pinion
3.
Drive gear
4.
Differential case
5.
Pinion mate gear
6.
Axle shaft
7.
Side gear
8.
Spring
9.
Differential lock solenoid
10. Pinion mate shaft
11. Pressure plate
12. Differential lock position switch
13. Cam ring
PDIA1062E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст