Nissan Frontier. Instruction — part 860
HA-32
< REMOVAL AND INSTALLATION >
LOW-PRESSURE FLEXIBLE HOSE
LOW-PRESSURE FLEXIBLE HOSE
Removal and Installation
INFOID:0000000009478593
REMOVAL
1. Remove the front right wheel and tire (VQ40DE only). Refer to
2. Remove the front right mudguard (VQ40DE only). Refer to
EXT-29, "Removal and Installation"
.
3. Remove the front right fender protector (VQ40DE only). Refer to
EXT-27, "Removal and Installation of
.
4. Discharge the refrigerant. Refer to
HA-14, "HFC-134a (R-134a) Service Procedure"
.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
5. Remove the low-pressure flexible A/C hose.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-ring of the low-pressure flexible A/C hose for installation.
• After charging refrigerant, check for leaks.
LOW-PRESSURE PIPE
HA-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
LOW-PRESSURE PIPE
Removal and Installation
INFOID:0000000009478594
REMOVAL
1. Discharge the refrigerant. Refer to
HA-14, "HFC-134a (R-134a) Service Procedure"
.
2. Disconnect the low-pressure flexible A/C hose from the low pressure pipe.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
3. Remove the low pressure pipe from the expansion valve.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
4. Remove the low-pressure A/C pipe.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-ring of the low-pressure A/C pipe for installation.
• After charging refrigerant, check for leaks.
HA-34
< REMOVAL AND INSTALLATION >
CONDENSER
CONDENSER
Removal and Installation
INFOID:0000000009478595
REMOVAL
1. Discharge the refrigerant. Refer to
HA-14, "HFC-134a (R-134a) Service Procedure"
.
2. Disconnect the harness connector from the engine cooling fan.
3. Remove the engine cooling fan. Refer to
CO-19, "Removal and Installation (Crankshaft driven type)"
CO-47, "Removal and Installation (Crankshaft driven type)"
(VQ40DE - Crankshaft driven
type), or
CO-48, "Removal and Installation (Motor driven type)"
(VQ40DE - Motor driven type).
4. Remove the radiator. Refer to
CO-16, "Removal and Installation"
(QR25DE),
(VQ40DE).
CAUTION:
Be careful not to damage the core surface of the condenser and the radiator.
5. Disconnect the high-pressure flexible A/C hose and the high-pressure A/C pipe from the condenser.
CAUTION:
Cap or wrap the joint of the pipes with suitable material such as vinyl tape to avoid the entry of air.
6. Disconnect the harness connector from the refrigerant pressure
sensor.
7. Remove the refrigerant pressure sensor from the condenser.
8. Lift the condenser out of the mounting grommets and remove the condenser.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-rings of the high-pressure A/C pipe, refrigerant pressure sensor, and high-
pressure flexible A/C hose for installation.
• After charging refrigerant, check for leaks.
• Replace the mounting grommets as necessary.
LJIA0177E
AMBIENT SENSOR
HA-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
AMBIENT SENSOR
Removal and Installation
INFOID:0000000009478596
Removal
1. Remove the front grille. Refer to
EXT-23, "Removal and Installation"
2. Disconnect the harness connector from the ambient sensor (1).
3. Release the ambient sensor (1) clip and remove.
Installation
Installation is in the reverse order of removal.
ALIIA0757ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст