Nissan Maxima. Instruction — part 673
FOREWORD
This instruction contains maintenance and repair procedures for the 2014
NISSAN Maxima.
In order to assure your safety and the efficient functioning of the vehicle,
this instruction should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this instruction is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Instruction are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Instructions.
Use this form to report any issues or comments you may have regarding our Service Instructions.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3880
SERVICE MANUAL: Model:
Year:
PUBLICATION NO. (Refer to Quick Reference Index ):
Please describe any Instruction issues or problems in detail:
Page number(s)
Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer)
YES
NO
If no, what page number(s)?
Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the instruction clear and easy to follow? (circle your answer)
YES
NO
Please comment:
What information should be included in NISSAN Service Instructions to better support you in servicing or
repairing customer vehicles?
DATE:
YOUR NAME:
POSITION:
DEALER:
DEALER NO.:
ADDRESS:
CITY:
STATE/PROV./COUNTRY:
ZIP/POSTAL CODE:
2014
QUICK REFERENCE CHART: MAXIMA
QUICK REFERENCE CHART: MAXIMA
Engine Tune-up Data
INFOID:0000000010197446
GENERAL SPECIFICATIONS
Drive Belt
INFOID:0000000010197447
DRIVE BELT
Cylinder arrangement
V-6
Displacement cm
3
(cu in)
3,498 (213.45)
Bore and stroke mm (in)
95.5 x 81.4 (3.760 x 3.205)
Valve arrangement
DOHC
Firing order
1-2-3-4-5-6
Number of piston rings
Compression
2
Oil
1
Number of main bearings
4
Compression ratio
10.6:1
Compression pressure
kPa (kg/cm
2
, psi)/300 rpm
Standard
1,275 (13.0, 185)
Minimum
981 (10.0, 142)
Differential limit between cylinders
98 (1.0, 14)
Cylinder number
Valve timing
(Valve timing control - “OFF”)
Unit: degree
a
b
c
d
e
f
240
240
−10
70
10
50
SEM713A
PBIC0187E
Tension of drive belt
Drive belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.
QUICK REFERENCE CHART: MAXIMA
2014
Spark Plug
INFOID:0000000010197448
SPARK PLUG
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Front Wheel Alignment (Unladen*)
INFOID:0000000010197445
*: Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
Make
DENSO
Standard type*
FXE22HR11
Gap
Standard
1.1 (0.043)
Limit
1.4 (0.055)
Market
United States/Canada
Mexico
Tire size
P245/45R18
P245/40R19
P245/45R18
P245/40R19
Camber
Degree minute
(Decimal degree)
(LH)
Minimum
-1
°05’ (-1.08°)
-1
°10’ (-1.17°)
-0
°55’ (-0.92°)
Nominal
-0
°20’ (-0.33°)
-0
°25’ (-0.42°)
-0
°10’ (-0.17°)
Maximum
0
°25’ (0.42°)
0
°20’ (0.33°)
0
°35’ (0.58°)
(RH)
Minimum
-1
°20’ (-1.33°)
-1
°25’ (-1.42°)
-1
°10’ (-1.17°)
Nominal
-0
°35’ (-0.58°)
-0
°40’ (-0.67°)
-0
°25’ (-0.42°)
Maximum
0
°10’ (0.17°)
0
°05’ (0.08°)
0
°20’ (0.33°)
(RH) with respect to (LH)
0
°15’ ± 0°33’ (0.25°± 0.55°)
Caster
Degree minute
(Decimal degree)
Minimum
4
°10’ (4.17°)
4
°15’ (4.25°)
3
°45’ (3.75°)
Nominal
4
°55’ (4.92°)
5
°00’ (5.00°)
4
°30’ (4.50°)
Maximum
5
°40’ (5.67°)
5
°45’ (5.75°)
5
°15’ (5.25°)
Maximum left
and right dif-
ference
0
°33’ (0.55°)
Kingpin inclination
Degree minute (Decimal degree)
14
°25’ (14.42°)
14
°05’ (14.08°)
Total toe-in
Distance (A - B)
Minimum
Out 1 mm (Out 0.039 in)
Nominal
In 1 mm (In 0.039 in)
Maximum
In 3 mm (In 0.118 in)
Angle (LH and RH)
Degree minute
(Decimal degree)
Minimum
Out 0
°04′48″ (Out 0.08°)
Nominal
In 0
°04′48″ (In 0.08°)
Maximum
In 0
°14′24″ (In 0.24°)
SFA234AC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст