Nissan Maxima. Instruction — part 832
MA-2
CVT FLUID . . . . . . . . . . . . . . . ....
CVT FLUID : Inspection . . . . . . . . . . ..
CVT FLUID : Changing . . . . . . . . . . ...
WHEELS . . . . . . . . . . . . . . . . ...
WHEELS : Inspection . . . . . . . . . . . .
WHEELS : Adjustment . . . . . . . . . . ...
BRAKE FLUID LEVEL AND LEAKS . . . . . ....
BRAKE FLUID LEVEL AND LEAKS : Inspection ...
BRAKE LINES AND CABLES . . . . . . . . ..
BRAKE LINES AND CABLES : Inspection . . . .
BRAKE FLUID . . . . . . . . . . . . . . ..
BRAKE FLUID : Drain and Refill . . . . . . ....
FRONT BRAKE . . . . . . . . . . . . . . .
FRONT BRAKE : Inspection of Pad . . . . . ...
FRONT BRAKE : Inspection of Rotor . . . . . .
REAR BRAKE . . . . . . . . . . . . . . ...
REAR BRAKE : Inspection of Pad . . . . . . ..
REAR BRAKE : Inspection of Rotor . . . . . .
STEERING GEAR AND LINKAGE . . . . . . ...
STEERING GEAR AND LINKAGE : Inspection . ..
POWER STEERING FLUID AND LINES . . . . ..
POWER STEERING FLUID AND LINES : Inspec-
tion . . . . . . . . . . . . . . . . . . ..
AXLE AND SUSPENSION PARTS . . . . . . ...
AXLE AND SUSPENSION PARTS : Inspection . .
DRIVE SHAFT . . . . . . . . . . . . . . ...
DRIVE SHAFT : Inspection . . . . . . . . . .
LOCKS, HINGES AND HOOD LATCH . . . . . .
LOCKS, HINGES AND HOOD LATCH : Lubricat-
ing . . . . . . . . . . . . . . . . . . ...
SEAT BELT, BUCKLES, RETRACTORS, AN-
CHORS AND ADJUSTERS . . . . . . . . . ..
SEAT BELT, BUCKLES, RETRACTORS, AN-
CHORS AND ADJUSTERS : Inspection . . . . .
PRECAUTIONS
MA-3
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009471095
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
MA-4
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009471096
The actual shapes of the tools may differ from those illustrated here.
Commercial Service Tool
INFOID:0000000009471097
Tool number
(TechMate No.)
Tool name
Description
KV10115801
(J-38956)
Oil filter wrench
Removing and installing oil filter
a: 64.3 mm (2.531 in)
KV991J0070
(J-45695)
Coolant Refill Tool
Refilling engine cooling system
—
(J-23688)
Engine coolant refractometer
Checking concentration of ethylene glycol in
engine coolant
S-NT375
LMA053
WBIA0539E
Tool name
Description
Power tool
Loosening nuts, screws and bolts
Spark plug wrench
Removing and installing spark plug
PIIB1407E
PBIC2982E
GENERAL MAINTENANCE
MA-5
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
PERIODIC MAINTENANCE
GENERAL MAINTENANCE
FOR USA AND CANADA
FOR USA AND CANADA : Explanation of General Maintenance
INFOID:0000000009471098
General maintenance includes those items which should be checked during the normal day-to-day operation
of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform
checks and inspections themselves or have their NISSAN dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
INSIDE THE VEHICLE
The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle,
etc.
Item
Reference page
Tires
Check the pressure with a gauge often and always prior to long distance trips.
Adjust the pressure in all tires, including the spare, to the pressure specified.
Check carefully for damage, cuts or excessive wear.
Wheel nuts
When checking the tires, make sure no nuts are missing, and check for any loose
nuts. Tighten if necessary.
Tire rotation
Tires should be rotated every 5,000 miles (8,000 km).
Tire pressure monitor-
ing system (TPMS)
transmitter compo-
nents
Replace the TPMS transmitter grommet seal, valve core and cap when the tires
are replaced due to wear or age.
Wheel alignment and
balance
If the vehicle should pull to either side while driving on a straight and level road,
or if you detect uneven or abnormal tire wear, there may be a need for wheel
alignment. If the steering wheel or seat vibrates at normal highway speeds,
wheel balancing may be needed. For additional information regarding tires, refer
to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada)
in the NISSAN Warranty Information Booklet.
Windshield
Clean the windshield on a regular basis. Check the windshield at least every six
months for cracks or other damage. Repair as necessary.
—
Windshield wiper
blades
Check for cracks or wear if they do not wipe properly.
—
Doors and engine
hood
Check that all doors and the engine hood operate properly. Also make sure that
all latches lock securely. Lubricate if necessary. Make sure that the secondary
latch keeps the hood from opening when the primary latch is released.
When driving in areas using road salt or other corrosive materials, check for lu-
brication frequently.
Lamps
Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and oth-
er lamps are all operating properly and installed securely. Also check headlamp
aim. Clean the headlamps on a regular basis.
(Xenon),
(Halogen)
Item
Reference page
Warning lamps and
chimes
Make sure that all warning lamps and chimes are operating properly.
—
Windshield wiper and
washer
Check that the wipers and washer operate properly and that the wipers do not
streak.
—
Windshield defroster
Check that the air comes out of the defroster outlets properly and in sufficient
quantity when operating the heater or air conditioner.
—
Steering wheel
Check that it has the specified play. Check for changes in the steering condition,
such as excessive play, hard steering or strange noises.
Free play: Less than 35 mm (1.38 in)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст