Nissan Maxima. Instruction — part 350
COMBINATION METER DISPLAY FUNCTION
DLK-119
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
COMBINATION METER DISPLAY FUNCTION
Description
INFOID:0000000009471718
Displays each operation method guide and warning for system malfunction.
Component Function Check
INFOID:0000000009471719
1.
CHECK FUNCTION
With CONSULT
Check the operation with (“LCD”) in the Active Test.
Is the inspection result normal?
YES
>> Meter display is OK.
NO
>> Refer to
DLK-119, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000009471720
1.
CHECK COMBINATION METER
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Check combination meter. Refer to
MWI-29, "Diagnosis Description"
2.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
.
>> Inspection End.
Is each warning displayed on meter display?
DLK-120
< DTC/CIRCUIT DIAGNOSIS >
WARNING CHIME FUNCTION
WARNING CHIME FUNCTION
Description
INFOID:0000000009471721
Performs operation method guide and warning with buzzer.
Component Function Check
INFOID:0000000009471722
1.
CHECK FUNCTION
With CONSULT
1. Check the operation with “INSIDE BUZZER” in the Active Test.
2. Touch “TAKE OUT”, “KNOB”or “KEY”on screen.
Is the inspection result normal?
YES
>> Warning buzzer into combination meter is OK.
NO
>> Refer to
DLK-120, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000009471723
1.
CHECK METER BUZZER CIRCUIT
WCS-20, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Replace combination meter. Refer to
MWI-122, "Removal and Installation"
2.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
>> Inspection End.
HAZARD FUNCTION
DLK-121
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD FUNCTION
Description
INFOID:0000000009471724
Perform answer-back for each operation with number of blinks.
Component Function Check
INFOID:0000000009471725
1.
CHECK FUNCTION
Check hazard warning lamp (“FLASHER”) in Active Test.
Is the inspection result normal?
YES
>> Hazard warning lamp circuit is OK.
NO
>> Refer to
DLK-121, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000009471726
1.
CHECK HAZARD SWITCH CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace hazard warning switch circuit. Refer to
.
2.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
.
>> Inspection End.
DLK-122
< DTC/CIRCUIT DIAGNOSIS >
HOMELINK UNIVERSAL TRANSCEIVER
HOMELINK UNIVERSAL TRANSCEIVER
Description
INFOID:0000000009471727
Homelink universal transceiver can store and transmit a maximum of 3 radio signals.
Allows operation of garage doors, gates, home and office lighting, entry door locks and security system, etc.
Homelink universal transceiver power supply uses vehicle battery, which enables it to maintain every program
in case battery is discharged or removed.
Component Function Check
INFOID:0000000009471728
1.
CHECK FUNCTION
Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Receiver or hand-held transmitter is malfunctioning.
2.
CHECK ILLUMINATE
1. Turn ignition switch “OFF”.
2. Press each of the transmitter buttons and watch for the red light to illuminate with each button.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Refer to
DLK-122, "Diagnosis Procedure"
.
3.
CHECK TRANSMITTER
Check transmitter with Tool*.
*:For details, refer to Technical Service Bulletin.
Is the inspection result normal?
YES
>> Receiver or hand-held transmitter malfunction, not vehicle related.
NO
>> Replace auto anti-dazzling inside mirror (homelink universal transceiver). Refer to
.
Diagnosis Procedure
INFOID:0000000009471729
Regarding Wiring Diagram information, refer to
.
1.
CHECK POWER SUPPLY
1. Disconnect auto anti-dazzling inside mirror (homelink universal transceiver) connector.
2. Check voltage between auto anti-dazzling inside mirror
(homelink universal transceiver) harness connector and ground.
ALKIA0426ZZ
Auto anti-dazzling inside mirror
(Homelink universal transceiver)
connector
Terminal Condition
Voltage (V)
(Approx.)
R4
10
Ground
Ignition switch position: LOCK
Battery voltage
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст