Nissan Maxima. Instruction — part 796
CLUSTER LID C
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID C
Removal and Installation
INFOID:0000000009465909
CLUSTER LID C
NOTE:
The cluster lid C lower finisher is only used in vehicles equipped with monochrome display unit.
Removal - With Monochrome Display
1. Release the clips and pawls and remove cluster lid C lower fin-
isher (1).
: Clip
: Pawl
2. Remove cluster lid C (base audio) with the base audio unit.
Refer to
AV-73, "Removal and Installation"
(BASE AUDIO) or
AV-161, "Removal and Installation"
(BOSE W/MONOCHROME
DISPLAY).
Installation
Installation is in the reverse order of removal.
Removal - With Color Display
1. Remove cluster lid D. Refer to
IP-18, "Removal and Installation"
2. Remove the screws (A) and reposition cluster lid C (1) to access
the harness connectors.
3. Disconnect the harness connectors and the remove cluster lid C
(Bose audio) with the Bose audio unit. Refer to
(BOSE W/COLOR DISPLAY) or
655, "Removal and Installation"
(BOSE W/COLOR DISPLAY W/
NAVI).
Installation
Installation is in the reverse order of removal.
ALNIA1152ZZ
ALJIA0340ZZ
IP-18
< REMOVAL AND INSTALLATION >
CLUSTER LID D
CLUSTER LID D
Removal and Installation
INFOID:0000000009465910
REMOVAL
1. Release the metal clips using a suitable tool, then position clus-
ter lid D (1) aside.
2. Disconnect the harness connectors, then remove cluster lid D
(1).
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0548ZZ
INSTRUMENT LOWER PANEL LH
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
INSTRUMENT LOWER PANEL LH
Removal and Installation
INFOID:0000000009465911
REMOVAL
1. Using a suitable tool, gently remove the instrument side finisher
(LH) (1).
2. Remove the instrument lower panel (LH) (1).
a. Open the fuse block cover and remove the instrument lower
panel screw (A).
b. Disconnect the harness connectors and aspirator hose.
c. Remove the instrument lower panel (LH) (1).
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0335ZZ
ALJIA0336ZZ
IP-20
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY
GLOVE BOX ASSEMBLY
Removal and Installation
INFOID:0000000009465912
REMOVAL
1. Using a suitable tool, gently remove the instrument panel side finisher (RH).
2. Open the glove box door and then remove the glove box assem-
bly screws (A).
3. Remove the glove box assembly lower screws (A).
4. Disconnect the harness connectors, then remove the glove box
assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0337ZZ
ALJIA0338ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст