Nissan Maxima. Instruction — part 330
TRUNK OPEN FUNCTION
DLK-39
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY : Component Parts Location
INFOID:0000000009471612
AWKIA1693ZZ
DLK-40
< SYSTEM DESCRIPTION >
TRUNK OPEN FUNCTION
1.
Horn (low) E215
(view with front fender protector LH
removed)
2.
Horn (high) E216
3.
IPDM E/R E17, E18
4.
Horn relay H-1
5.
Intelligent Key warning buzzer E28
6.
Remote keyless entry receiver M27
(view with instrument panel removed)
7.
Combination meter M24
8.
BCM M16, M17, M18, M19, M20, M21
(view with instrument panel removed)
9.
Stop lamp switch E38
10. Push button ignition switch M38
11. Key slot M40
12. CVT shift selector (park position switch
(Intelligent Key system)) M78
13. Front console antenna M41
(view with center console assembly
removed)
14. Front outside handle LH (outside key
antenna) D6
Front outside handle RH (outside key
antenna) D106
15. Front outside handle LH (request
switch) D15
Front outside handle RH (request
switch) D115
16. Front door lock assembly LH (door
unlock sensor) D10
17. Front door switch LH B8
RH B108
18. Rear door switch LH B18
RH B116
19. Rear parcel shelf antenna B29
20. Trunk opener request switch T5
21. Rear bumper antenna B46
22. Trunk lamp switch and trunk release
solenoid T7
AWKIA1694ZZ
TRUNK OPEN FUNCTION
DLK-41
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY : Component Description
INFOID:0000000009471613
Item
Function
BCM
Controls trunk open function.
Trunk release solenoid
Opens the trunk with the open signal from BCM.
Remote keyless entry receiver
Receives trunk open signal from the Intelligent Key, and then transmits to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Intelligent Key warning buzzer
Warns the user of the lock/unlock condition and inappropriate operations with a buzzer sound.
DLK-42
< SYSTEM DESCRIPTION >
WARNING FUNCTION
WARNING FUNCTION
System Description
INFOID:0000000009471614
OPERATION DESCRIPTION
The warning functions are as follows and are given to the user as warning information and warnings using
combinations of Intelligent Key warning buzzer, KEY warning lamp, key slot illumination and combination
meter display in combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
• Take away warning
• Door lock operation warning
• Key warning
• Intelligent Key insert information
• Engine start information
• Intelligent Key low battery warning
• Key ID warning
OPERATION CONDITION
Once the following condition from below is established, alert or warning will be executed.
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
When a malfunction is detected on BCM, “KEY” warning lamp will illuminate.
OFF position warning
For internal
When condition A, B or condition C is satisfied
• Condition A
- Ignition switch: ACC position
- Door switch (driver side): ON (Door is open)
• Condition B
- Turn ignition switch from ON to OFF while door is open
• Condition C
- Intelligent Key is inserted in key slot
- Door switch (driver side): ON (Door is open)
For external
OFF position warning (For internal) is in active mode, driver side door has
been closed.
NOTE:
OFF position (for external) active only when each of the sequence has oc-
curred as below: P position warning
→ ACC warning → OFF position warning
(for internal)
→ OFF position warning (for internal)
P position warning
• Shift position: Except P position
• Engine is running to stopped (Ignition switch is ON to OFF)
ACC warning
• During P position warning is in active mode, shift position has changed P po-
sition.
• Ignition switch: Except OFF position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст