Nissan Maxima. Instruction — part 9
ADP-28
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
ENTRY ASSIST FUNCTION : Component Description
INFOID:0000000010051698
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
INTELLIGENT KEY INTERLOCK FUNCTION
7.
A. Door mirror LH D4
B. Door mirror RH D107
C. Front door switch LH B8
8.
Door mirror remote control switch
M108
9.
Seat memory switch D13
: Front
Item
Function
Driver seat control unit
According to the ignition signal and front door switch LH signal from BCM,
• Operates the seat sliding motor for a constant amount.
• Requests the operation of tilt motor to automatic drive positioner control unit.
Automatic drive positioner control unit
Operates the tilt motor with the instructions from the driver seat control unit.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
• Ignition switch position: ACC/ON
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Tilt sensor
Detect the up/down position of steering column.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Tilt motor
Move the steering column up/down.
Sliding motor
Slide the seat forward/backward.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION : System Diagram
INFOID:0000000010051699
INTELLIGENT KEY INTERLOCK FUNCTION : System Description
INFOID:0000000010051700
OUTLINE
When unlocking doors by using Intelligent Key or door request switch (driver side), seat slide and steering tilt
move directly to the exit assist function.
Other loads move to the exit assist function after performing memory function.
Then performs the entry assist function.
OPERATION PROCEDURE
1. Unlock doors by using Intelligent Key or door request switch (driver side) .
2. The system performs exit assist operation and memory operation.
NOTE:
Further information for Intelligent Key interlock function. Refer to Owner’s Instruction.
OPERATION CONDITION
Satisfy all of the following items. The Intelligent Key interlock function is not performed if these items are not
satisfied.
DETAIL FLOW
JMJIA0117GB
Item
Request status
Ignition position
OFF
Switch inputs
• Power seat switch LH
• ADP steering switch
• Door mirror remote control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
CVT selector lever
P position
ADP-30
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Order
Input
Output
Control unit condition
1
• Door unlock signal
(CAN)
• Key ID signal (CAN)
—
Driver seat control unit receives the door unlock signal and the key
ID signal from BCM when unlocking the door with Intelligent Key or
driver side door request switch.
2
—
—
Driver seat control unit performs the seat slide and steering tilt move
directly to the exit assist function. Other loads move to the exit assist
function after performing memory function.
3
—
—
Driver seat control unit performs the entry assist function.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-31
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION : Component Parts Location
INFOID:0000000010051701
ALJIA0580ZZ
1.
Push-button ignition switch M38
2.
BCM M16, M17, M18, M19 (view
with instrument panel removed)
3.
TCM F15
4.
A. ADP steering switch M39
B. Tilt motor M71, telescopic motor
M73
5.
A. Power seat switch LH B213
B. Reclining motor B222
C. Driver seat control unit B203,
B211
6.
Automatic drive positioner control
unit M63, M67 (view with instrument
panel removed)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст