Nissan Maxima. Instruction — part 640
EXL-302
< WIRING DIAGRAM >
[HALOGEN TYPE]
BACK-UP LAMP
ABLIA0530GB
BACK-UP LAMP
EXL-303
< WIRING DIAGRAM >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ABLIA1723GB
EXL-304
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000010051095
CAUTION:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagno-
sis if any DTC is detected.
Symptom
Possible cause
Inspection item
Headlamp does not
switch to the high beam.
One side
• Fuse
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
(High beam relay)
• IPDM E/R
Headlamp (HI) circuit.
Refer to
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM"
Refer to
High beam indicator lamp is not turned ON.
(Headlamp switches to the high beam.)
• Combination meter
• BCM
• Combination meter.
Data monitor "HI-BEAM IND".
• BCM (HEAD LAMP).
Active test "HEADLAMP".
Headlamp does not
switch to the low beam.
One side
Front combination lamp (Low
beam relay)
—
Both sides
• Combination switch (lighting
and turn signal switch)
• Harness between the combina-
tion switch (lighting and turn sig-
nal switch) and BCM
• BCM
Combination switch (lighting and
turn signal switch).
Refer to
High beam request signal
• BCM
• IPDM E/R
IPDM E/R.
Data monitor "HL HI REQ".
IPDM E/R
—
Headlamp does not turn
ON.
One side
• Fuse
• Bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Headlamp (LO) circuit.
Refer to
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON"
Refer to
Headlamp does not turn
OFF.
When the ignition
switch is turned ON
• BCM
• Combination switch (lighting
and turn signal switch)
Combination switch (lighting and
turn signal switch).
Refer to
The ignition switch is
turned OFF (After acti-
vating the battery sav-
er).
IPDM E/R
—
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-305
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Headlamp is not turned ON/OFF with the lighting
switch AUTO.
• Combination switch (lighting
and turn signal switch)
• Harness between the combina-
tion switch (lighting and turn sig-
nal switch) and BCM
• BCM
Combination switch (lighting and
turn signal switch).
Refer to
.
• Optical sensor
• Harness between the optical
sensor and BCM
• BCM
Optical sensor.
Refer to
.
Daytime light system does not activate.
• Either high beam bulb
• Parking brake switch
• Combination switch (lighting
and turn signal switch)
• BCM
• IPDM E/R
• Daytime light relay
• Harness between IPDM E/R
and daytime light relay.
Daytime light system description.
Refer to
.
Front fog lamp is not
turned ON.
One side
• Front fog lamp bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Front fog lamp circuit.
Refer to
.
Both side
Symptom diagnosis
"BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON"
Refer to
Parking lamp is not turned
ON.
One side
• Fuse
• Parking lamp bulb
• Harness between IPDM E/R
and the front/rear combination
lamp
• Front/rear combination lamp
• IPDM E/R
Parking lamp circuit.
Refer to
.
Both sides
Symptom diagnosis
"PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED
ON".
Refer to
Turn signal lamp does not
blink.
Indicator lamp is nor-
mal.
(The applicable side
performs the high flash-
er activation).
• Harness between BCM and
each turn signal lamp
• Turn signal lamp bulb
• Door mirror (if equipped with
turn signals in the door mirrors)
Turn signal lamp circuit.
Refer to
.
Turn signal indicator lamp
does not blink.
One side
Combination meter
—
Both sides
(Always)
• Turn signal indicator lamp sig-
nal
• Combination meter
• BCM
• Combination meter.
Data monitor "TURN IND".
• BCM (FLASHER).
Active test "FLASHER".
Both sides
(Does blink when acti-
vating the hazard warn-
ing lamp with the
ignition switch OFF)
• The combination meter power
supply and the ground circuit
• Combination meter
Combination meter.
Power supply and the ground circuit
Refer to
.
• Hazard warning lamp does not activate.
• Hazard warning lamp continues activating. (Turn
signal is normal)
• Hazard switch
• Harness between the hazard
switch and BCM
• BCM
Hazard switch
Refer to
.
Symptom
Possible cause
Inspection item
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст