Nissan Maxima. Instruction — part 607
EXL-170
< SERVICE DATA AND SPECIFICATIONS (SDS)
[XENON TYPE]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000009465293
*: Always check with the Parts Department for the latest parts information.
Item
Wattage (W)*
Front combination lamp
Headlamp (Xenon low beam)
35
Headlamp (Halogen high beam)
65
Park/Turn lamp
28/8
Front side marker lamp
5
Front fog lamp
55
Door mirror turn signal lamp
—
Rear combination lamp
Stop lamp
—
Tail lamp
—
Rear turn signal lamp
21
Rear side marker lamp
5
Back-up lamp
18
License plate lamp
5
High-mounted stop lamp
Without rear spoiler
—
With rear spoiler
—
DIAGNOSIS AND REPAIR WORKFLOW
EXL-171
< BASIC INSPECTION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000010051020
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
AWLIA1907GB
EXL-172
< BASIC INSPECTION >
[HALOGEN TYPE]
DIAGNOSIS AND REPAIR WORKFLOW
>> GO TO 2.
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check if any concerns occur other than those mentioned in the customer
interview.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH CONSULT
Perform the self diagnosis with CONSULT. Check if any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9.
6.
FAIL-SAFE ACTIVATION CHECK
Determine if the customer's concern is related to fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system in which the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9.
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9.
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
Perform the self diagnosis with CONSULT. Verify that no DTCs are detected. Erase all DTCs which were
detected prior to the repair. Perform the self diagnosis with CONSULT again. Verify that DTC is not detected
again.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 11.
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
DIAGNOSIS AND REPAIR WORKFLOW
EXL-173
< BASIC INSPECTION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Does it operate normally?
YES
>> Inspection End.
NO
>> GO TO 3.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст