Nissan Maxima. Instruction — part 87
AV-168
< REMOVAL AND INSTALLATION >
[MONOCHROME DISPLAY - W/ BOSE]
SUBWOOFER
SUBWOOFER
Removal and Installation
INFOID:0000000009471267
REMOVAL
1. Remove the rear parcel shelf finisher. Refer to
INT-28, "Removal and Installation"
.
2. Remove the subwoofer screws.
3. Pull out the subwoofer, disconnect the harness connector from the subwoofer and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1134ZZ
1.
Subwoofer (LH)
2.
Subwoofer (RH)
A.
Subwoofer screws
B.
Subwoofer connectors
AV
BOSE SPEAKER AMP
AV-169
< REMOVAL AND INSTALLATION >
[MONOCHROME DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BOSE SPEAKER AMP
Removal and Installation
INFOID:0000000009767263
REMOVAL
NOTE:
If removing the BOSE speaker amp. bracket, it is necessary to remove the parcel shelf finisher. The BOSE
speaker amp. can be removed without removing the BOSE speaker amp. bracket.
1. Disconnect the battery negative terminal.
2. Remove the trunk upper finisher. Refer to
3. Remove the Bose speaker amp. screws.
4. Disconnect the Bose speaker amp. connectors and remove the Bose speaker amp.
INSTALLATION
Installation is in the reverse order of removal.
1.
Bose speaker amp.
A.
Bose speaker amp. screws
ALNIA1137ZZ
AV-170
< REMOVAL AND INSTALLATION >
[MONOCHROME DISPLAY - W/ BOSE]
STEERING SWITCH
STEERING SWITCH
Removal and Installation
INFOID:0000000009471271
REMOVAL
1. Remove the driver airbag module. Refer to
SR-12, "Removal and Installation"
.
2. Remove the steering wheel audio control switch screws (A).
3. Release the steering wheel audio control switch harness clips
(B).
4. Remove the steering wheel audio control switches (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1132ZZ
AV
AUDIO ANTENNA
AV-171
< REMOVAL AND INSTALLATION >
[MONOCHROME DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AUDIO ANTENNA
Location of Antenna
INFOID:0000000009471272
Window Antenna Repair
INFOID:0000000009471273
ELEMENT CHECK
1. Attach probe circuit tester (ohm setting) to antenna terminal on
each side.
• When measuring continuity, wrap tin foil around the top of
probe. Then, press the foil against the wire with your finger.
ALNIA1181ZZ
1.
Audio unit
2.
Audio unit antenna feeder
3.
In-line connectors M103, M501
4.
Antenna amp.
5.
Window antenna
6.
Satellite radio tuner
7.
Satellite radio antenna feeder
8.
Satellite radio antenna
SEL250I
SEL122R
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст