Nissan Maxima. Instruction — part 568
EXL-14
< SYSTEM DESCRIPTION >
[XENON TYPE]
AUTO LIGHT SYSTEM
Component Parts Location
INFOID:0000000010050189
Component Description
INFOID:0000000010050190
AUTO LIGHT OPERATION
Applicable lamps
• Low beam headlamp
• Parking, license plate and tail lamps
• High beam headlamp (with the lighting switch in HIGH BEAM position)
• Front fog lamp (with the lighting switch in front fog lamp ON position)
When the lighting switch is in AUTO position with the ignition switch in ON position, BCM detects the AUTO
LIGHT (ON) by BCM combination switch (lighting and turn signal switch) reading function. BCM automatically
turns ON/OFF the applicable lamps according to ambient brightness.
NOTE:
Timing for when lamps turn ON/OFF can be changed by the function setting of CONSULT. Refer to
"HEADLAMP : CONSULT Function (BCM - HEAD LAMP)"
1.
IPDM E/R E17, E18, E200
2.
BCM M16, M17, M18, M19, M21 (view
with combination meter removed)
3.
Combination switch (lighting and turn
signal switch) M28
4.
Optical sensor M66
AWLIA1633ZZ
FRONT FOG LAMP
EXL-15
< SYSTEM DESCRIPTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP
System Diagram
INFOID:0000000010050191
System Description
INFOID:0000000010050192
• BCM (Body Control Module) controls front fog lamp operation.
• IPDM E/R (Intelligent Power Distribution Module Engine Room) operates front fog lamp according to CAN
communication signals from BCM.
• Combination meter operates front fog lamp indicator according to inputs via the CAN communication lines.
Component Parts Location
INFOID:0000000010050193
ABLIA2704GB
1.
IPDM E/R E17, E18, E200
2.
BCM M16, M17, M18, M19 (view with
combination meter removed)
3.
Combination switch (lighting and turn
signal switch) M28
AWLIA1634ZZ
EXL-16
< SYSTEM DESCRIPTION >
[XENON TYPE]
FRONT FOG LAMP
Component Description
INFOID:0000000010050194
FRONT FOG LAMP OPERATION
When the lighting switch is in front fog lamp ON position and also in 1ST or 2ND position or AUTO position
(headlamp is ON), the BCM detects FR FOG ON and the HEAD LAMP1, 2 ON or the AUTO LIGHT ON. The
BCM sends a front fog lamp request ON signal through the CAN communication lines to the IPDM E/R. The
IPDM E/R then turns ON the front fog lamp relay sending power to the front fog lamps.
The combination meter also receives a front fog lamp request ON signal through the CAN communication
lines at which time it turns the front fog indicator ON.
TURN SIGNAL AND HAZARD WARNING LAMPS
EXL-17
< SYSTEM DESCRIPTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
TURN SIGNAL AND HAZARD WARNING LAMPS
System Diagram
INFOID:0000000010050195
System Description
INFOID:0000000010050196
• BCM (Body Control Module) controls turn signal lamp (RH and LH) and hazard warning lamp operation.
• Combination meter operates turn signal indicator (RH and LH) according to CAN communication signals
from BCM.
Component Parts Location
INFOID:0000000010050197
ABLIA2705GB
1.
BCM M16, M17, M18, M19 (view with
combination meter removed)
2.
Combination switch (lighting and turn
signal switch) M28
3.
Combination meter M24
4.
Hazard switch M54
AWLIA1635ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст