Nissan Maxima. Instruction — part 1176
TM-168
< REMOVAL AND INSTALLATION >
[CVT: RE0F09B]
TCM
REMOVAL AND INSTALLATION
TCM
Exploded View
INFOID:0000000010114017
Removal and Installation
INFOID:0000000009469195
CAUTION:
• Do not impact the TCM when removing or installing TCM.
• When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then
replace TCM. Refer to
.
REMOVAL
1. Disconnect the battery negative terminal. Refer to
PG-67, "Removal and Installation (Battery)"
2. Remove front air duct. Refer to
EM-24, "Removal and Installation"
3. Disconnect TCM harness connector (A).
4. Remove TCM nuts and TCM (1) from bracket.
INSTALLATION
Installation is in the reverse order of removal.
1.
Bracket
2.
TCM
Vehicle front
AWDIA0556GB
: Front
JPDIA0596ZZ
TCM
TM-169
< REMOVAL AND INSTALLATION >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Adjustment
INFOID:0000000010114018
ADJUSTMENT AFTER INSTALLATION
Perform “ADDITIONAL SERVICE WHEN REPLACING TCM”. Refer to
TM-170
< REMOVAL AND INSTALLATION >
[CVT: RE0F09B]
CVT SHIFT SELECTOR
CVT SHIFT SELECTOR
Exploded View
INFOID:0000000009469197
Removal and Installation
INFOID:0000000009469198
REMOVAL
1. Disconnect the battery negative terminal. Refer to
2. Move CVT shift selector to “N” position.
1.
CVT shift selector handle
2.
Shift selector handle clip
3.
Shift selector handle cover
4.
CVT shift selector assembly
5.
Shift lock unit
Front
ALBIA0615GB
CVT SHIFT SELECTOR
TM-171
< REMOVAL AND INSTALLATION >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
3. Slide shift selector handle cover (3) downward.
CAUTION:
Be careful not to damage shift selector handle cover.
4. Pull shift selector handle clip (2) out of CVT shift selector handle
(1).
5. Remove CVT shift selector handle and shift selector handle
cover.
6. Remove center console assembly. Refer to
.
7. Move CVT shift selector to “P” position.
8. Remove control cable (1) from CVT shift selector assembly.
9. Remove CVT shift selector assembly (2).
10. Disconnect CVT shift selector harness connector (A) using a
suitable tool.
11. Remove shift lock unit from CVT shift selector assembly.
INSTALLATION
Installation is in the reverse order of removal.
• When installing control cable (1) to CVT shift selector assembly
(2), check that control cable is fully pressed in with the ribbed sur-
face (A) facing upward.
Inspection and Adjustment
INFOID:0000000009469199
INSPECTION
1. Move CVT shift selector to “P” position, and turn ignition switch ON (engine stop).
2. Check that CVT shift selector can be moved from “P” position when brake pedal is depressed. Also check
that CVT shift selector can be moved from “P” position only when brake pedal is depressed.
3. Move CVT shift selector and check for excessive effort, sticking, noise or rattle.
ALDIA0209ZZ
: Nut
JPDIA0615ZZ
AWDIA0558ZZ
JPDIA0609ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст