Nissan Maxima. Instruction — part 1190
WCS-12
< SYSTEM DESCRIPTION >
WARNING CHIME SYSTEM
PARKING BRAKE RELEASE WARNING CHIME : Component Parts Location
INFOID:0000000010049228
PARKING BRAKE RELEASE WARNING CHIME : Component Description
INFOID:0000000010049229
ALNIA1155ZZ
1.
A. Combination meter M24
B. Combination switch (lighting and
turn signal switch) M28
2.
A. Seat belt buckle switch LH B202
B. Front door switch LH B8
3.
BCM M16, M17, M18, M19 (view with
instrument panel removed)
4.
ABS actuator and electric unit (control
unit) E26
5.
Parking brake switch E35 [view with
instrument panel lower cover (LH) re-
moved]
Unit
Description
Combination meter
• Judges whether the parking brake is released using the parking brake switch signal from the
parking brake switch, and sounds the buzzer if necessary.
• Receives a vehicle speed signal from ABS actuator and electric unit (control unit) via CAN
communication line.
WCS
WARNING CHIME SYSTEM
WCS-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to combination meter via CAN communication line.
Parking brake switch
Transmits parking brake switch signal to the combination meter.
Unit
Description
WCS-14
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (METER)
DIAGNOSIS SYSTEM (METER)
Diagnosis Description
INFOID:0000000010054751
SELF-DIAGNOSIS MODE
• Odo/trip meter and information display segment operation can be checked in self-diagnosis mode.
• Meters/gauges can be checked in self-diagnosis mode.
OPERATION PROCEDURE
1. Turn the ignition switch OFF.
2. While pushing the odo/trip meter switch, turn the ignition switch ON again.
3. Push the odo/trip meter switch at least 3 times within 7 seconds after the ignition switch is turned ON.
4. The unified meter control unit is turned to self-diagnosis mode.
• All the segments on the odo/trip meter illuminate.
• Dots in all segments of information display LCD (1) flash alter-
nately.
NOTE:
If any of the segments are not displayed, replace the combina-
tion meter. Refer to
MWI-122, "Removal and Installation"
.
5. Push the odo/trip meter switch. Each meter/gauge should indicate as shown in the figure.
CONSULT Function (METER/M&A)
INFOID:0000000010054752
CONSULT can display each diagnostic item using the diagnostic test modes shown following.
SKIB1206J
JSNIA0020GB
AWNIA2309ZZ
WCS
DIAGNOSIS SYSTEM (METER)
WCS-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SELF-DIAG RESULTS
Display Item List
.
DATA MONITOR
Display Item List
X: Applicable
METER/M&A diagnosis mode
Description
SELF DIAGNOSTIC RESULT
Displays combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Description
SPEED METER [km/h] or [mph]
X
X
Displays the value of vehicle speed signal.
SPEED OUTPUT [km/h] or [mph]
X
X
Displays the value of vehicle speed signal, which is transmitted to
each unit with CAN communication.
ODO OUTPUT
X
Displays the value, which is calculated by vehicle speed signal.
TACHO METER [rpm]
X
X
Displays the value of engine speed signal, which is input from ECM.
FUEL METER [lit.]
X
X
Displays the value, which processes a resistance signal from fuel
gauge.
W TEMP METER [
°C] or [°F]
X
X
Displays the value of engine coolant temperature signal, which is in-
put from ECM.
ABS W/L [ON/OFF]
X
Displays [ON/OFF] condition of ABS warning lamp.
VDC/TCS IND [ON/OFF]
X
Displays [ON/OFF] condition of VDC/TCS OFF indicator lamp.
SLIP IND [ON/OFF]
X
Displays [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF]
X
Displays [ON/OFF] condition of brake warning lamp.*
DOOR W/L [ON/OFF]
X
Displays [ON/OFF] condition of door warning lamp.
TRUNK/GLAS-H [ON/OFF]
X
Displays [ON/OFF] condition of trunk warning lamp.
HI-BEAM IND [ON/OFF]
X
Displays [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF]
X
Displays [ON/OFF] condition of turn indicator.
LIGHT IND [ON/OFF]
X
Displays [ON/OFF] condition of light indicator.
OIL W/L [ON/OFF]
X
Displays [ON/OFF] condition of oil pressure warning lamp.
MIL [ON/OFF]
X
Displays [ON/OFF] condition of malfunction indicator lamp.
CRUISE IND [ON/OFF]
X
Displays [ON/OFF] condition of CRUISE indicator.
CVT IND [ON/OFF]
X
Displays [ON/OFF] condition of CVT warning lamp.
FUEL W/L [ON/OFF]
X
Displays [ON/OFF] condition of low-fuel warning lamp.
WASHER W/L [ON/OFF]
X
Displays [ON/OFF] condition of low washer fluid warning lamp.
AIR PRES W/L [ON/OFF]
X
Displays [ON/OFF] condition of tire pressure warning lamp.
KEY G/Y W/L [ON/OFF]
X
Displays [ON/OFF] condition of key warning lamp.
LCD
X
Displays the value of Intelligent Key system message indication.
SHIFT IND [P, R, N, D]
X
Displays [P, R, N, D] range position of CVT.
FUEL CAP W/L [ON/OFF]
X
Status of fuel filler cap warning display detected from fuel filler cap
warning display signal received from ECM via CAN communication.
M RANGE SW [ON/OFF]
X
Displays [ON/OFF] condition of instruction mode range switch.
NM RANGE SW [ON/OFF]
X
Displays [ON/OFF] condition of except for instruction mode range
switch.
ST SFT UP SW [ON/OFF]
X
Displays [ON/OFF] condition of steering shift-up switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст