Nissan Maxima. Instruction — part 787
INT-18
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
REMOVAL AND INSTALLATION
FRONT DOOR FINISHER
Exploded View
INFOID:0000000009465881
Removal and Installation
INFOID:0000000009465882
REMOVAL
1. Remove the step lamp. Refer to
INL-84, "Removal and Installation"
1.
Mirror cover
2.
Front door finisher
3.
Step lamp
4.
Arm rest finisher
5.
Main power window and door lock/
unlock switch finisher
6.
Front door grip cover
7.
Seat memory switch (if equipped)
8.
Inside release handle escutcheon
9.
Inside release handle
A.
Flat head screws
B.
Screws
Front
Metal clip
Pawl
Clip
AWJIA0782ZZ
FRONT DOOR FINISHER
INT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2. Release the pawls at the rear edge and remove the inside release handle escutcheon, then remove the
screw.
3. Remove the front door grip cover (1) by using a suitable tool to
release the pawls.
CAUTION:
• Use suitable tool to release at the point shown or damage
may occur to the pawls.
• Lift upward on front door grip cover to release pawls and
remove.
• Wrap the tip of a suitable tool with a cloth when removing
metal clips from finisher.
4. Remove the front door grip clip (A).
5. Remove the front door grip screw (A).
6. Remove the power window and door lock/unlock switch and finisher as an assembly. Refer to
(MAIN) or
PWC-108, "Removal and Installation"
(RH).
ALJIA0359ZZ
ALJIA0360ZZ
ALJIA0367ZZ
INT-20
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
7. Remove the front door finisher screw (A) under power window
and door lock/unlock switch finisher.
8. Release the front door finisher clips using a suitable tool (A).
: Clip
9. Disconnect the harness connector from the seat memory switch (if equipped).
10. Disconnect inside handle and lock knob cables from front door finisher.
11. Disconnect the harness connector from the power window and door lock/unlock switch lamp.
12. Remove the front door finisher.
INSTALLATION
Installation is in the reverse order of removal.
• If installing a new front door finisher, transfer all the necessary parts to the new front door finisher.
ALJIA0366ZZ
ALJIA0729ZZ
REAR DOOR FINISHER
INT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR DOOR FINISHER
Exploded View
INFOID:0000000009465883
Removal and Installation
INFOID:0000000009465884
CAUTION:
Wrap the tip of a suitable tool with a cloth when removing metal clips from finishers.
REMOVAL
1. Remove the step lamp. Refer to
INL-84, "Removal and Installation"
2. Release the pawls at the rear edge and remove the inside release handle escutcheon, then remove the
screw.
3. Remove the rear door armrest.
a. Lift up to release the rear door armrest pawls.
b. Disconnect the harness connector from the rear power window switch.
1.
Rear door finisher
2.
Step lamp
3.
Armrest finisher
4.
Rear power window switch finisher
5.
Inside release handle escutcheon
6.
Inside release handle
A.
Flat head screws
B.
Screw
Clip
Pawl
Front
AWJIA0783ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст