Nissan Maxima. Instruction — part 75
AV-120
< DTC/CIRCUIT DIAGNOSIS >
[MONOCHROME DISPLAY - W/ BOSE]
SUBWOOFER
1. Connect BOSE speaker amp. connector B110 and suspect rear
subwoofer connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between BOSE speaker amp. harness connec-
tor B110 terminals with CONSULT or oscilloscope.
Is the audio signal voltage as specified?
YES
>> Replace suspect rear subwoofer. Refer to
.
NO
>> GO TO 4.
4.
HARNESS CHECK
1. Disconnect audio unit connector M132 and BOSE speaker amp.
connector B109.
2. Check continuity between audio unit harness connector M132
(A) and BOSE speaker amp. harness connector B109 (B).
3. Check continuity between audio unit harness connector M132
(A) terminal and ground.
Are continuity test results as specified?
YES
>> GO TO 5.
NO
>> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
5.
REAR SUBWOOFER SIGNAL CHECK
Connector
Terminals
Condition
Reference
signal
(+)
(-)
B110
13
8
Receive au-
dio signal
5
6
AWNIA1706ZZ
SKIA0177E
A
B
Continuity
Connector
Terminal
Connector
Terminal
M132
4
B109
24
Yes
5
23
13
26
14
25
A
—
Continuity
Connector
Terminal
M132
4
Ground
No
5
13
14
AWNIA1704ZZ
AV
SUBWOOFER
AV-121
< DTC/CIRCUIT DIAGNOSIS >
[MONOCHROME DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1. Connect audio unit connector M132 and BOSE speaker amp.
connector B109.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between audio unit harness connector termi-
nals with CONSULT or oscilloscope.
Is the audio signal voltage as specified?
YES
>> Replace BOSE speaker amp. Refer to
.
NO
>> Replace audio unit. Refer to
Connector
Terminals
Condition
Reference
signal
(+)
(-)
M132
4
5
Receive
audio sig-
nal
13
14
AWNIA0034ZZ
SKIA0177E
AV-122
< DTC/CIRCUIT DIAGNOSIS >
[MONOCHROME DISPLAY - W/ BOSE]
AMP ON SIGNAL CIRCUIT
AMP ON SIGNAL CIRCUIT
Description
INFOID:0000000009471239
When the audio system is turned on, a voltage signal is supplied from the audio unit to the BOSE speaker
amp. When this signal is received, the BOSE speaker amp. will turn on.
Diagnosis Procedure
INFOID:0000000009471240
Regarding Wiring Diagram information, refer to
AV-138, "Wiring Diagram - With BOSE Audio System"
.
1.
CHECK AMP ON SIGNAL (BOSE SPEAKER AMP)
1. Turn audio system ON.
2. Check voltage between BOSE speaker amp. harness connector
B109 terminal 20 and ground.
Is inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK AMP ON SIGNAL (AUDIO UNIT)
Check voltage between audio unit harness connector M132 terminal
1 and ground.
Is inspection result normal?
YES
>> Repair harness or connector.
NO
>> Replace audio unit. Refer to
(+)
(-) Voltage
(Approx.)
Connector
Terminal
B109
20
Ground
Battery voltage
AWNIA1707ZZ
(+)
(-) Voltage
(Approx.)
Connector
Terminal
M132
1
Ground
Battery voltage
ALNIA0148ZZ
AV
STEERING SWITCH
AV-123
< DTC/CIRCUIT DIAGNOSIS >
[MONOCHROME DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
Description
INFOID:0000000009471241
When one of the steering wheel audio control switches is pushed, the resistance in the steering wheel audio
control switch circuit changes, depending on which button is pushed.
Diagnosis Procedure
INFOID:0000000009471242
Regarding Wiring Diagram information, refer to
AV-138, "Wiring Diagram - With BOSE Audio System"
1.
CHECK STEERING SWITCH RESISTANCE
1. Disconnect steering switch connector M88.
2. Check resistance between steering switch connector terminals.
Do the steering switches check OK?
YES
>> GO TO 2.
NO
>> Replace steering switch. Refer to
AV-170, "Removal and Installation"
2.
CHECK HARNESS BETWEEN COMBINATION SWITCH (SPIRAL CABLE) AND BLUETOOTH
®
CON-
TROL UNIT
1. Turn ignition switch OFF.
2. Disconnect Bluetooth
®
control unit connector B131 and combination switch (spiral cable) connector M30.
3. Check continuity between Bluetooth
®
control unit harness connector B131 and combination switch (spiral
cable) harness connector M30.
4. Check continuity between Bluetooth
®
control unit connector B131 and ground.
Are the continuity results as specified?
YES
>> GO TO 3.
NO
>> Repair harness.
Terminal
Signal name
Condition
Resistance
(
Ω)
(Approx.)
15
17
Volume (down)
Depress volume DOWN switch.
0
Volume (up)
Depress volume UP switch.
121
Phone/End
Depress
switch.
321
14
Source
Depress SOURCE switch.
0
Seek (up)
Depress
switch.
121
Seek (down)
Depress
switch.
321
Phone/Send
Depress
switch.
723
AWNIA0035ZZ
Connector
Terminal
Connector
Terminal
Continuity
B131
12
M30
24
Yes
13
31
14
33
Connector
Terminal
—
Continuity
B131
12
Ground
No
13
14
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст