Nissan Maxima. Instruction — part 27
ADP-100
< DTC/CIRCUIT DIAGNOSIS >
RECLINING MOTOR
4. Check continuity between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace driver seat control unit. Refer to
ADP-169, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Driver seat control unit connector
Terminal
Reclining motor connector
Terminal
Continuity
B211
35
B222
5
Yes
43
1
Driver seat control unit
connector
Terminal
Ground
Continuity
B211
35
No
43
LIFTING MOTOR (FRONT)
ADP-101
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
LIFTING MOTOR (FRONT)
Description
INFOID:0000000010051803
• The lifting motor (front) is installed to the seat frame.
• The lifting motor (front) is activated with the driver seat control unit.
• The lifter (front) is moved upward/downward by changing the rotation direction of lifting motor (front).
Component Function Check
INFOID:0000000010051804
1.
CHECK FUNCTION
1. Select “SEAT LIFTER FR” in “ACTIVE TEST” mode with CONSULT.
2. Check the lifting motor (front) operation.
Is the operation of relevant parts normal?
YES
>> Inspection End.
NO
>> Perform diagnosis procedure. Refer to
ADP-101, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010051805
Regarding Wiring Diagram information, refer to
1.
CHECK LIFTING MOTOR (FRONT) POWER SUPPLY
1. Turn the ignition switch to ACC.
2. Perform “ACTIVE TEST” (“SEAT LIFTER FR“) with CONSULT.
3. Check voltage between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace front power seat LH [lifting motor (front)]. Refer to
SE-68, "Removal and Installation"
NO
>> GO TO 2
2.
CHECK LIFTING MOTOR (FRONT) CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit and front power seat LH [lifting motor (front)].
3. Check continuity between driver seat control unit harness connector and front power seat LH [lifting motor
(front)] harness connector.
Test Item
Description
SEAT LIFTER FR
OFF
Seat lifting (front)
Stop
UP
Upward
DWN
Downward
Terminal
Test Item
Voltage (V)
(Approx.)
(+)
(-)
Driver seat control
unit connector
Terminal
B211
34
Ground
SEAT LIFTER
FR
OFF
0
UP
0
DWN (down)
Battery voltage
42
OFF
0
UP
Battery voltage
DWN (down)
0
ADP-102
< DTC/CIRCUIT DIAGNOSIS >
LIFTING MOTOR (FRONT)
4. Check continuity between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace driver seat control unit. Refer to
ADP-169, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Driver seat control unit connec-
tor
Terminal
Front power seat LH [lifting motor
(front)] connector
Terminal
Continuity
B211
34
B205
5
Yes
42
4
Driver seat control unit
connector
Terminal
Ground
Continuity
B211
34
No
42
LIFTING MOTOR (REAR)
ADP-103
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
LIFTING MOTOR (REAR)
Description
INFOID:0000000010051806
• The lifting motor (rear) is installed to the seat frame.
• The lifting motor (rear) is activated with the driver seat control unit.
• The seat lifter (rear) is moved upward/downward by changing the rotation direction of lifting motor (rear).
Component Function Check
INFOID:0000000010051807
1.
CHECK FUNCTION
1. Select “SEAT LIFTER RR” in “ACTIVE TEST” mode with CONSULT.
2. Check the lifting motor (rear) operation.
Is the operation of relevant parts normal?
YES
>> Inspection End.
NO
>> Perform diagnosis procedure. Refer to
ADP-103, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010051808
Regarding Wiring Diagram information, refer to
1.
CHECK LIFTING MOTOR (REAR) POWER SUPPLY
1. Turn the ignition switch to ACC.
2. Perform “ACTIVE TEST” (“SEAT LIFTER RR“) with CONSULT.
3. Check voltage between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace front power seat LH [lifting motor (rear)]. Refer to
SE-126, "Removal and Installation"
NO
>> GO TO 2
2.
CHECK LIFTING MOTOR (REAR) CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit and front power seat LH [lifting motor (rear)].
3. Check continuity between driver seat control unit harness connector and front power seat LH [lifting motor
(rear)] harness connector.
Test Item
Description
SEAT LIFTER RR
OFF
Seat lifting (rear)
Stop
UP
Upward
DWN
Downward
Terminal
Test Item
Voltage (V)
(Approx.)
(+)
(-)
Driver seat control unit
connector
Terminal
B211
40
Ground
SEAT LIFTER
RR
OFF
0
UP
0
DWN (down)
Battery voltage
41
OFF
0
UP
Battery voltage
DWN (down)
0
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст