Nissan Maxima. Instruction — part 272
STEERING ANGLE SENSOR
BRC-109
< REMOVAL AND INSTALLATION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000009466786
Removal and Installation
INFOID:0000000009466787
REMOVAL
1. Remove the spiral cable. Refer to
SR-15, "Removal and Installation"
.
2. Remove the screws (A) and release the clips (B) to remove the
steering angle sensor (1) from the spiral cable (2).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Perform the neutral position adjustment for the steering angle sensor. Refer to
OF STEERING ANGLE SENSOR NEUTRAL POSITION : Special Repair Requirement"
1.
Steering angle sensor
A.
Screw
Front
ALFIA0235ZZ
ALFIA0123ZZ
BRM-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
D
E
F
G
H
I
J
L
M
SECTION
BRM
A
B
BRM
N
O
P
CONTENTS
BODY REPAIR
FEATURES OF NEW MODEL . . . . . ..
BODY EXTERIOR PAINT COLOR . . . . . .
Body Exterior Paint Color . . . . . . . . . ...
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
HANDLING PRECAUTIONS FOR PLASTICS . .
Precautions For Plastics . . . . . . . . . . ..
REMOVAL AND INSTALLATION . . . .
BODY COMPONENT PARTS . . . . . . . .
Underbody Component Parts . . . . . . . . ..
Body Component Parts . . . . . . . . . . ...
CORROSION PROTECTION . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Anti-Corrosive Wax . . . . . . . . . . . .
Undercoating . . . . . . . . . . . . . . ...
BODY SEALING . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
BODY CONSTRUCTION . . . . . . . . .
Body Construction . . . . . . . . . . . . ...
BODY ALIGNMENT . . . . . . . . . . ...
Body Center Marks . . . . . . . . . . . .
Panel Parts Matching Marks . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Engine Compartment . . . . . . . . . . . .
Underbody . . . . . . . . . . . . . . . ...
Passenger Compartment . . . . . . . . . .
Rear Body . . . . . . . . . . . . . . . ...
Roof . . . . . . . . . . . . . . . . . . .
PRECAUTIONS IN REPAIRING HIGH
STRENGTH STEEL . . . . . . . . . . ..
High Strength Steel (HSS) . . . . . . . . .
REPLACEMENT OPERATIONS . . . . . ...
Description . . . . . . . . . . . . . . . ...
Hoodledge . . . . . . . . . . . . . . . ...
Front Side Member (Partial Replacement) . . . ..
Front Side Member Assembly . . . . . . . . .
Front Pillar . . . . . . . . . . . . . . . ..
Dash Side . . . . . . . . . . . . . . . .
Center Pillar . . . . . . . . . . . . . . . .
Front Body Side Outer . . . . . . . . . . . .
Rear Body Side Outer . . . . . . . . . . . .
Outer Sill Reinforcement . . . . . . . . . . .
Rear Fender . . . . . . . . . . . . . . .
Tail Lamp Housing Base . . . . . . . . . . .
Parcel Shelf . . . . . . . . . . . . . . . .
Rear Wheel Housing . . . . . . . . . . . ...
Rear Body Side Inner Assembly . . . . . . . ..
Rear Floor Rear . . . . . . . . . . . . . .
Rear Panel Assembly . . . . . . . . . . . ..
Roof . . . . . . . . . . . . . . . . . . .
Roof Rails, Dual Panel Sunroof . . . . . . . ...
Roof Rails, Single Panel Sunroof . . . . . . .
Roof Side Rail . . . . . . . . . . . . . . ..
Body Side Inner . . . . . . . . . . . . . ...
Rear Center Crossmember . . . . . . . . . .
BRM-2
< FEATURES OF NEW MODEL >
BODY EXTERIOR PAINT COLOR
FEATURES OF NEW MODEL
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
INFOID:0000000009465827
M= Metallic, S= Solid, 2S= Solid and Clear, 2P= 2-coat Pearl, 3P= 3-coat pearl, PM= Pearl metallic. Black is solvent based, all others
are water based, † = Primerless diamond clear coat.
ALKIA1531GB
Component
Color code
CAJ
GAD
KH3
K23
KAD
NAB
QAB
RAB
Description
Grayish
Brown
Reddish
Black
Black
Silver
Gray
Dark
Red
White
Dark
Blue
Paint type
M
M
2S
M
M
M
3P
M
Hard clear
coat
†
†
†
†
†
†
†
†
1
Bumper fascia
Body color
CAJ
GAD
KH3
K23
KAD
NAB
QAB
RAB
2
Front grille
Chrome
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
3
Door outside
mirror
Base
Black
KH3
KH3
KH3
KH3
KH3
KH3
KH3
KH3
Housing
Body color
CAJ
GAD
KH3
K23
KAD
NAB
QAB
RAB
4
Door outside
handle
Chrome
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
5
Center mud-
guard
Body color
CAJ
GAD
KH3
K23
KAD
NAB
QAB
RAB
6
License lamp
finisher
Chrome
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
Cr2P
PRECAUTIONS
BRM-3
< PRECAUTION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009465828
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least 3 minutes before performing any service.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст