Nissan Juke F15. Instruction — part 866
POWER TRANSISTOR
HAC-99
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
POWER TRANSISTOR
Exploded View
INFOID:0000000012200090
• *1: Instruction air conditioning
• *2: Automatic air conditioning
Removal and Installation
INFOID:0000000012200091
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Disconnect power transistor connector.
3. Slide power transistor (1) to the left while pressing lever (A), and
then remove power transistor.
INSTALLATION
Install in the reverse order of removal.
1.
A/C unit assembly
2.
Blower fan resistor*
1
3.
Sub harness*
1
4.
Power transistor*
2
5.
Sub harness*
2
6.
Blower motor
JPIIA1549ZZ
JPIIA1636ZZ
HAC-100
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
DOOR MOTOR
DOOR MOTOR
Exploded View
INFOID:0000000012200092
LEFT SIDE
RIGHT SIDE
1.
A/C unit assembly
2.
Intake door lever
3.
Intake door motor
4.
Air mix door motor
5.
Upper air mix door rod
6.
Upper air mix door lever
7.
Lower air mix door lever
8.
Lower air mix door rod
JPIIA1557ZZ
DOOR MOTOR
HAC-101
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR : Removal and Installation
INFOID:0000000012200093
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-13, "Removal and Installation"
2. Remove fixing screws (A), and then remove intake door motor
(1).
3. Disconnect intake door motor connector (2).
INSTALLATION
Install in the reverse order of removal.
MODE DOOR MOTOR
MODE DOOR MOTOR : Removal and Installation
INFOID:0000000012200094
REMOVAL
1.
A/C unit assembly
2.
Main link
3.
Sub defroster door link
4.
Sub defroster door rod
5.
Mode link
6.
Plate
7.
Mode link rod
8.
Sub harness
9.
Mode door motor
10. Sub defroster door lever
11. Center ventilator and defroster door link
12. Plate
13. Center ventilator and defroster door rod 14. Center ventilator and defroster door lever
JPIIA1558ZZ
JMIIA0897ZZ
HAC-102
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
DOOR MOTOR
1. Remove glove box assembly Refer to
IP-13, "Removal and Installation"
.
2. Remove foot duct RH. Refer to
VTL-13, "FOOT DUCT : Removal and Installation"
3. Disconnect mode link rod from mode door motor.
4. Remove fixing screws (A), and then remove mode door motor
(1).
5. Disconnect mode door motor connector (2).
INSTALLATION
Install in the reverse order of removal.
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000012200095
REMOVAL
1. Set the temperature at full cold.
CAUTION:
Always perform the above procedure when removing air mix door motor. Otherwise, air mix door
may interfere in A/C unit assembly may be damaged.
2. Remove instrument lower panel LH. Refer to
IP-13, "Removal and Installation"
.
3. Remove fixing screws (A), and then remove air mix door motor
(1).
4. Disconnect air mix door motor connector (2).
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
.
JMIIA0896ZZ
JMIIA0898ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст