Nissan Juke F15. Instruction — part 56
AV-210
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
CONSULT Function
INFOID:0000000012202617
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with multi display unit.
SELF DIAGNOSTIC RESULT
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnosis mode
Description
Self Diagnostic Results
Displays malfunctioning systems stored in the multi display unit.
Data Monitor
Displays the multi display unit input/output data in real time.
Active Test
The multi display unit sends a drive signal to electronic components to check their operation.
CAN Diag Support Monitor
Displays CAN communication status.
Monitor item
Unit
Description
ECO SW
On / Off
Displays the ECO switch signal status sent via CAN communication.
NORMAL SW
On / Off
Displays the NORMAL switch signal status sent via CAN communication.
SPORTS SW
On / Off
Displays the SPORTS switch signal status sent via CAN communication.
BOOST PRESSURE
kPa
Displays the boost pressure signal value received from ECM via CAN com-
munication.
ENGINE SPEED
Tr/min
Displays the engine speed signal value received from ECM via CAN com-
munication.
ENGINE TORQUE
Nm
Displays the engine torque signal value received from ECM via CAN com-
munication.
BATTERY VOLTAGE
V
Displays the input voltage value.
FUEL CONSUMPTION
mm
3
Displays the fuel consumption signal value received from ECM via CAN
communication.
VEHICLE SPEED
km/h
Displays the vehicle speed signal value received from the combination
meter via CAN communication.
LONG ACC
G
Displays the decel G signal received from ABS actuator and electric unit
(control unit) via CAN communication.
TRANCE ACC
G
Displays the side G signal received from ABS actuator and electric unit
(control unit) via CAN communication.
DIST TOTAL
km
Displays the mileage signal value received from the combination meter via
CAN communication.
POSI LIGHT REQ
On / Off
Displays the parking lamp signal value received from BCM via CAN com-
munication.
CLUSTER ILL REQ
On / Off
Displays the dimming signal value received from BCM via CAN communi-
cation.
ENGINE STATUS
STOP / STALL /
RUN / CRA
Displays the engine status signal value received from ECM via CAN com-
munication.
A/C SW
*
On / Off
Displays the A/C switch signal status sent via CAN communication.
AUTO SW
*
On / Off
Displays the AUTO switch signal status sent via CAN communication.
RR DEF SW
*
On / Off
Displays the RR DEF switch signal status sent via CAN communication.
FR DEF SW
*
On / Off
Displays the FR DEF switch signal status sent via CAN communication.
AV
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
AV-211
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: This is not used to determine ON/OFF of the indicator lamp.
ACTIVE TEST
Indicator
VENT SW1
*
On / Off
Displays the air outlet switch signal status sent via CAN communication.
VENT SW2
*
VENT / B/L / FOOT
/ D/F
Displays the air outlet switch signal status sent via CAN communication.
INTAKE SW
*
On / Off
Displays the air intake switch signal status sent via CAN communication.
INTAKE SW LONG PUSH
*
On / Off
Displays the air intake switch hold signal status sent via CAN communica-
tion.
OFF SW
*
On / Off
Displays the OFF switch signal status sent via CAN communication.
TEMP SW1
*
On / Off
Displays the temperature control dial signal status sent via CAN communi-
cation.
FAN SW1
*
On / Off
Displays the fan control dial signal status sent via CAN communication.
A/C SW IND
On / Off
Displays the A/C switch indicator signal value received from the A/C auto
amp. via CAN communication.
A/C INDICATOR
On / Off
Displays the A/C display signal value received from the A/C auto amp. via
CAN communication.
OFF INDICATOR
On / Off
Displays the OFF display signal value received from the A/C auto amp. via
CAN communication.
AIR VENT IND
Non-display / VENT
/
B/L / FOOT /
D/F / DEF
Displays the air outlet indicator signal value received from the A/C auto
amp. via CAN communication.
FR DEF SW IND
On / Off
Displays the RF DEF indicator signal value received from the A/C auto
amp. via CAN communication.
FRE SW IND
On / Off
Displays the FRE indicator signal value received from the A/C auto amp.
via CAN communication.
REC SW IND
On / Off
Displays the REC indicator signal value received from the A/C auto amp.
via CAN communication.
RR DEF SW IND
On / Off
Displays the RR DEF indicator signal value received from the IPDM E/R
via CAN communication.
AUTO IND
Off / Auto
Displays the AUTO indicator signal value received from the A/C auto amp.
via CAN communication.
TEMP IND
°C
Displays the temperature setting unit signal value received from the A/C
auto amp. via CAN communication.
FAN IND
Off / speed
Displays the fan setting signal value received from the A/C auto amp. via
CAN communication.
Monitor item
Unit
Description
Test Item
Description
INDICATOR
The test activates the switch illuminations, display illuminations, and switch LEDs in the AIR CON
mode and D-MODES to see if they are functioning normally.
Test Item
Function
INDICATOR
The sequence below is repeated.
• All indicators remain ON for 5 seconds in AIR CON mode
⇔All indicators remain ON for 5 seconds
in D-MODE.
AV-212
< ECU DIAGNOSIS INFORMATION >
[INTEGRATED CONTROL SYSTEM]
MULTI DISPLAY UNIT
ECU DIAGNOSIS INFORMATION
MULTI DISPLAY UNIT
Reference Value
INFOID:0000000012202618
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor item
Test condition
Reference value/Status
ECO SW
Ignition switch ON
ECO mode
On
Other than the above
Off
NORMAL SW
Ignition switch ON
NORMAL mode
On
Other than the above
Off
SPORTS SW
Ignition switch ON
SPORT mode
On
Other than the above
Off
BOOST PRESSURE
Ignition switch ON Engine running
Values according to boost
pressure
ENGINE SPEED
[Tr/min]
Ignition switch ON Engine running
Values according to en-
gine speed
ENGINE TORQUE
[Nm]
Ignition switch ON Engine running
Values according to en-
gine torque
BATTERY VOLTAGE
[V]
Ignition switch ON
—
Values according to input
voltage
FUEL CONSUMPTION
[mm
3
]
Ignition switch ON Engine running
Values according to in-
stantaneous fuel con-
sumption
VEHICLE SPEED
[km/h]
Ignition switch ON Driving
Values according to vehi-
cle speed
LONG ACC
[G]
Ignition switch ON Driving
Values according to decel.
G
TRANCE ACC
[G]
Ignition switch ON Driving
Values according to side G
DIST TOTAL
[km/h]
Ignition switch ON
—
Values according to mile-
age
POSI LIGHT REQ
Ignition switch ON
Light SW at 1st or 2nd position
On
Light switch OFF
Off
CLUSTER ILL REQ
Ignition switch ON
Block the light beam from the auto light sensor
when the light switch is in the 1st position, 2nd
position or AUTO position.
On
Expose the auto light sensor to light when the
light switch is OFF or in the 1st position, 2nd
position or AUTO position.
Off
ENGINE STATUS
Ignition switch ON
Engine stop
STOP
Engine stall
STALL
Engine running
RUN
Engine cranking
CRA
A/C SW
*
Ignition switch ON
Cycles On/Off whenever the A/C switch is
pressed.
On
→Off→On
AUTO SW
*
Ignition switch ON
Cycles On/Off whenever the AUTO switch is
pressed.
On
→Off→On
AV
MULTI DISPLAY UNIT
AV-213
< ECU DIAGNOSIS INFORMATION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RR DEF SW
*
Ignition switch ON While the rear DEF switch is held down
On
Ignition switch ON Other than the above
Off
FR DEF SW
*
Ignition switch ON
Cycles On/Off whenever the front DEF switch is
pressed.
On
→Off→On
VENT SW1
*
Ignition switch ON
Cycles On/Off whenever the VENT, B/L, FOOT,
or D/F switch is pressed.
On
→Off→On
VENT SW2
*
Ignition switch ON
Press the VENT switch.
VENT
Press the B/L switch.
B/L
Press the FOOT switch.
FOOT
Press the D/F switch.
D/F
INTAKE SW
*
Ignition switch ON
Cycles On/Off whenever the intake switch is
pressed.
On
→Off→On
INT SW LONG PUSH
*
Ignition switch ON
Cycles On/Off whenever the intake switch is
held down.
On
→Off→On
Off SW
*
Ignition switch ON
Cycles On/Off whenever the OFF switch is held
down.
On
→Off→On
TEMP SW1
*
Ignition switch ON
Cycles On/Off whenever the temperature con-
trol dial is turned clockwise or counterclock-
wise.
On
→Off→On
FAN SW1
*
Ignition switch ON
Cycles On/Off whenever the fan control dial is
turned clockwise or counterclockwise.
On
→Off→On
A/C SW IND
Ignition switch ON
A/C switch indicator ON
On
A/C switch indicator OFF
Off
A/C INDICATOR
Ignition switch ON
A/C indicator ON
On
A/C indicator OFF
Off
Off INDICATOR
Ignition switch ON
Air conditioner OFF
On
Other than the above
Off
AIR VENT IND
Ignition switch ON
Air conditioner OFF
Nothing displayed.
VENT mode
VENT
B/L mode
B/L
FOOT mode
FOOT
D/F mode
D/F
DEF mode
DEF
FR DEF SW IND
Ignition switch ON
Front DEF switch indicator ON
On
Other than the above
Off
FRE SW IND
Ignition switch ON
FRE switch indicator ON
On
Other than the above
Off
REC SW IND
Ignition switch ON
REC switch indicator ON
On
Other than the above
Off
RR DEF SW IND
Ignition switch ON
Rear DEF switch indicator ON
On
Other than the above
Off
AUTO IND
Ignition switch ON
MANUAL mode
Off
AUTO mode
Auto
TEMP IND
[
°C]
Ignition switch ON
—
Displays the temperature
set by the user.
FAN IND
Ignition switch ON
Air conditioner OFF
Off
Displays a value according to the fan speed.
1 to 7 speed
Monitor item
Test condition
Reference value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст