Nissan Juke F15. Instruction — part 699
EXL-16
< SYSTEM DESCRIPTION >
[XENON TYPE]
SYSTEM
• Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal
indicator lamp according to the turn indicator signal.
3-TIME FLASHER FUNCTION
• By a short touch of the turn signal lever, BCM blinks the turn signal lamps 3 times in the selected direction.
• Cancels the operation when short touch of the turn signal lever in the reverse direction during the 3-time
flasher function operation.
HIGH FLASHER OPERATION
• BCM detects the turn signal lamp circuit status from the current value.
• BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn sig-
nal lamp operating.
NOTE:
The blinking speed is normal while operating the hazard warning lamp.
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMP SYSTEM
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMP SYSTEM : System Di-
agram
INFOID:0000000012201620
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMP SYSTEM : System De-
scription
INFOID:0000000012201621
OUTLINE
Parking, license plate, side marker and tail lamps are controlled by combination switch reading function and
parking, license plate, side marker and tail lamps control function of BCM, and relay control function of IPDM
E/R.
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS OPERATION
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits the position light request signal to IPDM E/R and the combination meter via CAN communi-
cation according to the parking, license plate, side marker and tail lamps ON condition.
Parking, license plate, side marker and tail lamps ON condition (When any of the following conditions are satisfied)
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO (Only when the illumination judgment by auto light system is ON. For details, refer to
EXL-12, "AUTO LIGHT SYSTEM : System Description"
.)
• IPDM E/R turns the integrated tail lamp relay ON and turns the parking, license plate and tail lamps ON
according to the position light request signal.
• Combination meter turns the tail lamp indicator lamp ON according to the position light request signal.
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMP SYSTEM : Fail-Safe
INFOID:0000000012201622
CAN COMMUNICATION CONTROL
JMLIA2550GB
SYSTEM
EXL-17
< SYSTEM DESCRIPTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
When CAN communication with BCM is impossible, IPDM E/R performs fail-safe control. After CAN communi-
cation recovers normally, it also returns to normal control.
If No CAN Communication Is Available With BCM
FRONT FOG LAMP SYSTEM
FRONT FOG LAMP SYSTEM : System Diagram
INFOID:0000000012201623
FRONT FOG LAMP SYSTEM : System Description
INFOID:0000000012201624
OUTLINE
Front fog lamp is controlled by combination switch reading function and front fog lamp control function of BCM,
and relay control function of IPDM E/R.
FRONT FOG LAMP OPERATION
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits the front fog light request signal to IPDM E/R via CAN communication according to the front
fog lamp ON condition.
Front fog lamp ON condition
- Front fog lamp switch ON, and any of the following conditions are satisfied. [Except headlamp (HI) ON con-
dition]
• Lighting switch 2ND
• Lighting switch AUTO (Only when the illumination judgment by auto light system is ON. For details, refer to
EXL-12, "AUTO LIGHT SYSTEM : System Description"
.)
• IPDM E/R turns the integrated front fog lamp relay ON, and turns the front fog lamp ON according to the
front fog light request signal.
FRONT FOG LAMP SYSTEM : Fail-Safe
INFOID:0000000012201625
CAN COMMUNICATION CONTROL
When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN
communication recovers normally, it also returns to normal control.
If No CAN Communication Is Available With BCM
EXTERIOR LAMP BATTERY SAVER SYSTEM
Control part
Fail-safe operation
• Parking lamp
• License plate lamp
• Tail lamp
• Turns ON the tail lamp relay when the ignition switch is turned ON
• Turns OFF the tail lamp relay when the ignition switch is turned OFF
JMLIA1154GB
Control part
Fail-safe operation
Front fog lamp
Front fog lamp relay OFF
EXL-18
< SYSTEM DESCRIPTION >
[XENON TYPE]
SYSTEM
EXTERIOR LAMP BATTERY SAVER SYSTEM : System Diagram
INFOID:0000000012201626
EXTERIOR LAMP BATTERY SAVER SYSTEM : System Description
INFOID:0000000012201627
OUTLINE
• Exterior lamp battery saver system is controlled by combination switch reading function and exterior lamp
battery saver function of BCM, and relay control function of IPDM E/R.
• BCM turns the exterior lamp* OFF, according to the vehicle status when ignition switch is turned OFF while
exterior lamp is ON, for preventing battery discharge.
*: Headlamp (LO/HI), front fog lamp, parking lamp, license plate lamp, side marker lamp and tail lamp
EXTERIOR LAMP BATTERY SAVER ACTIVATION
• BCM activates the timer and turns the exterior lamp OFF 45 seconds after the ignition switch is turned from
ON
→ OFF with the exterior lamps ON.
• When in any of following conditions (after the exterior lamp battery saver is activated), exterior lamps can be
turned ON.
- Ignition switch is turned from OFF
→ ON
- Lighting switch is changed
- Front fog lamp switch is changed
JMLIA5953GB
DIAGNOSIS SYSTEM (BCM)
EXL-19
< SYSTEM DESCRIPTION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000012962262
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×: Applicable item
NOTE:
*: For models with automatic A/C, this diagnosis mode is not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on
CONSULT.
Diagnosis mode
Function Description
Work Support
Changes the setting for each system function.
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification
The BCM part number is displayed.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
Work Support
Data Monitor
Active Test
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
×
Air conditioning system
AIR CONDITONER
×
×*
• Intelligent Key system
• Engine start system
INTELLIGENT KEY
×
×
×
Combination switch
COMB SW
×
Body control system
BCM
×
NVIS - NATS
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door open
TRUNK
×
Theft warning alarm
THEFT ALM
×
×
×
RAP
RETAINED PWR
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст