Nissan Juke F15. Instruction — part 296
DMS-14
< WIRING DIAGRAM >
[INTEGRATED CONTROL SYSTEM]
INTEGRATED CONTROL SYSTEM
JRNWF0756GB
DMS
DIAGNOSIS AND REPAIR WORK FLOW
DMS-15
< BASIC INSPECTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000012201601
DESCRIPTION OF TROUBLE DIAGNOSIS FLOWCHART
DETAILS OF TROUBLE DIAGNOSIS FLOWCHART
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurs.
>> GO TO 2.
2.
CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer.
• Check if any other malfunctions are present.
>> GO TO 3.
3.
CONSULT SELF-DIAGNOSIS
1. Perform “MULTI DISPLAY” “self diagnosis” by connecting CONSULT.
2. When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
NOTE:
If “CAN COM CIRC [U1000]” is displayed, start the diagnosis from the CAN communication system. Refer to
.
Is any DTC No. displayed?
YES
>> GO TO 4.
NO
>> GO TO 5.
4.
DTC/SYSTEM DIAGNOSIS
JSNIA4500GB
DMS-16
< BASIC INSPECTION >
[INTEGRATED CONTROL SYSTEM]
DIAGNOSIS AND REPAIR WORK FLOW
1. Perform a DTC/system diagnosis and repair or replace any malfunctioning part.
2. When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
>> GO TO 6.
5.
PERFORM DIAGNOSIS BY SYMPTOM
Perform a diagnosis by symptom and repair or replace any malfunctioning part.
>> GO TO 6.
6.
FINAL CHECK
Check that the multi display unit functions normally.
Does it operate normally?
YES
>> End of trouble diagnosis
NO
>> GO TO 2.
DMS
MULTI DISPLAY UNIT
DMS-17
< REMOVAL AND INSTALLATION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
REMOVAL AND INSTALLATION
MULTI DISPLAY UNIT
Exploded View
INFOID:0000000012201602
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000012201603
REMOVAL
.
CAUTION:
• When performing the work, use a shop cloth to protect the parts from damage.
• Always fix the harness clamp in position.
INSTALLATION
Install in the reverse order of removal.
1.
Silencer tape
2.
Multi display unit
3.
Silencer tape
4.
Clip
5.
Control finisher
JPNIA1860ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст