Nissan Juke F15. Instruction — part 206
DLK-4
HOOD . . . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
HOOD ASSEMBLY . . . . . . . . . . . . ..
HOOD ASSEMBLY : Removal and Installation . .
HOOD ASSEMBLY : Adjustment . . . . . . ..
HOOD HINGE . . . . . . . . . . . . . . ...
HOOD HINGE : Removal and Installation . . . .
HOOD HINGE : Adjustment . . . . . . . . ..
HOOD SUPPORT ROD . . . . . . . . . . .
HOOD SUPPORT ROD : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . .
RADIATOR CORE SUPPORT . . . . . . .
MR16DDT . . . . . . . . . . . . . . . . .
MR16DDT : Exploded View . . . . . . . . ...
MR16DDT : Removal and Installation . . . . ...
FRONT FENDER . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
FRONT DOOR . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
DOOR ASSEMBLY . . . . . . . . . . . . ..
DOOR ASSEMBLY : Removal and Installation . .
DOOR ASSEMBLY : Adjustment . . . . . . ..
DOOR STRIKER . . . . . . . . . . . . . ..
DOOR STRIKER : Removal and Installation . . .
DOOR HINGE . . . . . . . . . . . . . . ...
DOOR HINGE : Removal and Installation . . . .
DOOR CHECK LINK . . . . . . . . . . . .
DOOR CHECK LINK : Removal and Installation ...
REAR DOOR . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
DOOR ASSEMBLY . . . . . . . . . . . . ..
DOOR ASSEMBLY : Removal and Installation . .
DOOR ASSEMBLY : Adjustment . . . . . . ..
DOOR STRIKER . . . . . . . . . . . . . ..
DOOR STRIKER : Removal and Installation . . .
DOOR HINGE . . . . . . . . . . . . . . ...
DOOR HINGE : Removal and Installation . . . .
DOOR CHECK LINK . . . . . . . . . . . .
DOOR CHECK LINK : Removal and Installation ...
BACK DOOR . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
BACK DOOR ASSEMBLY . . . . . . . . . ...
BACK DOOR ASSEMBLY : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . .
BACK DOOR ASSEMBLY : Adjustment . . . .
BACK DOOR STRIKER . . . . . . . . . . ..
BACK DOOR STRIKER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
BACK DOOR HINGE . . . . . . . . . . . ..
BACK DOOR HINGE : Removal and Installation ..
BACK DOOR STAY . . . . . . . . . . . .
BACK DOOR STAY : Removal and Installation .
BACK DOOR STAY : Disposal . . . . . . . .
BACK DOOR WEATHER-STRIP . . . . . . .
BACK DOOR WEATHER-STRIP : Removal and
Installation . . . . . . . . . . . . . . . .
HOOD LOCK . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
HOOD LOCK . . . . . . . . . . . . . . ...
HOOD LOCK : Removal and Installation . . . ..
HOOD LOCK CONTROL CABLE . . . . . . ...
HOOD LOCK CONTROL CABLE : Removal and
Installation . . . . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . ..
FRONT DOOR LOCK . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ..
DOOR LOCK . . . . . . . . . . . . . . ...
DOOR LOCK : Removal and Installation . . . ..
INSIDE HANDLE . . . . . . . . . . . . . .
INSIDE HANDLE : Removal and Installation . .
OUTSIDE HANDLE . . . . . . . . . . . . .
OUTSIDE HANDLE : Removal and Installation .
REAR DOOR LOCK . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
DOOR LOCK . . . . . . . . . . . . . . ...
DOOR LOCK : Removal and Installation . . . ..
INSIDE HANDLE . . . . . . . . . . . . . .
INSIDE HANDLE : Removal and Installation . .
OUTSIDE HANDLE . . . . . . . . . . . . .
OUTSIDE HANDLE : Removal and Installation .
BACK DOOR LOCK . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
DOOR LOCK . . . . . . . . . . . . . . ...
DOOR LOCK : Removal and Installation . . . ..
EMERGENCY LEVER . . . . . . . . . . . .
EMERGENCY LEVER : Unlock procedures . . .
FUEL FILLER LID OPENER . . . . . . .
Exploded View . . . . . . . . . . . . . ..
FUEL FILLER LID . . . . . . . . . . . . ...
DLK-5
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FUEL FILLER OPENER CABLE . . . . . . . .
FUEL FILLER OPENER CABLE : Removal and
Installation . . . . . . . . . . . . . . . .
FUEL FILLER LID LOCK . . . . . . . . . .
FUEL FILLER LID LOCK : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
DOOR SWITCH . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
INSIDE KEY ANTENNA . . . . . . . . ...
INSTRUMENT CENTER . . . . . . . . . . ..
INSTRUMENT CENTER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
LUGGAGE ROOM . . . . . . . . . . . . ...
LUGGAGE ROOM : Exploded View . . . . . .
LUGGAGE ROOM : Removal and Installation . ..
OUTSIDE KEY ANTENNA . . . . . . . ..
DRIVER SIDE . . . . . . . . . . . . . . ...
DRIVER SIDE : Removal and Installation . . . .
PASSENGER SIDE . . . . . . . . . . . . ..
PASSENGER SIDE : Removal and Installation .
REAR BUMPER . . . . . . . . . . . . . ...
REAR BUMPER : Removal and Installation . . ..
INTELLIGENT KEY WARNING BUZZER . ...
Removal and Installation . . . . . . . . . ...
REMOTE KEYLESS ENTRY RECEIVER . ...
Removal and Installation . . . . . . . . . ...
INTELLIGENT KEY BATTERY . . . . . ...
DLK-6
< PRECAUTION >
[WITH INTELLIGENT KEY SYSTEM]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000012196571
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Instruction.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, it is recommended that all maintenance
and repair be performed by an authorized NISSAN/INFINITI dealer.
• Improper repair, including incorrect removal and installation of the SRS, can lead to personal injury
caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module,
see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery or batteries, and wait at least 3 minutes before performing any service.
Precaution for Procedure without Cowl Top Cover
INFOID:0000000012196572
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc to prevent damage to
windshield.
Precautions For Xenon Headlamp Service
INFOID:0000000012196573
WARNING:
Comply with the following warnings to prevent any serious accident.
• Disconnect the battery cable (negative terminal) or the power supply fuse before installing, remov-
ing, or touching the xenon headlamp (bulb included). The xenon headlamp contains high-voltage
generated parts.
• Never work with wet hands.
• Check the xenon headlamp ON-OFF status after assembling it to the vehicle. Never turn the xenon
headlamp ON in other conditions. Connect the power supply to the vehicle-side connector.
PIIB3706J
PRECAUTIONS
DLK-7
< PRECAUTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
(Turning it ON outside the lamp case may cause fire or visual impairments.)
• Never touch the bulb glass immediately after turning it OFF. It is extremely hot.
CAUTION:
Comply with the following cautions to prevent any error and malfunction.
• Install the xenon bulb securely. (Insufficient bulb socket installation may melt the bulb, the connec-
tor, the housing, etc. by high-voltage leakage or corona discharge.)
• Never perform HID circuit inspection with a tester.
• Never touch the xenon bulb glass with hands. Never put oil and grease on it.
• Dispose of the used xenon bulb after packing it in thick vinyl without breaking it.
• Never wipe out dirt and contamination with organic solvent (thinner, gasoline, etc.).
Precautions for Removing Battery Terminal
INFOID:0000000012831472
When disconnecting the battery terminal, pay attention to the following.
• Always use a 12V battery as power source.
• Never disconnect battery terminal while engine is running.
• When removing the 12V battery terminal, turn OFF the ignition
switch and wait at least 30 seconds.
• For vehicles with the engine listed below, remove the battery termi-
nal after a lapse of the specified time:
NOTE:
ECU may be active for several tens of seconds after the ignition switch is turned OFF. If the battery terminal
is removed before ECU stops, then a DTC detection error or ECU data corruption may occur.
• After high-load driving, if the vehicle is equipped with the V9X engine, turn the ignition switch OFF and wait
for at least 15 minutes to remove the battery terminal.
NOTE:
• Turbocharger cooling pump may operate in a few minutes after the ignition switch is turned OFF.
• Example of high-load driving
- Driving for 30 minutes or more at 140 km/h (86 MPH) or more.
- Driving for 30 minutes or more on a steep slope.
• For vehicles with the 2-batteries, be sure to connect the main battery and the sub battery before turning ON
the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of main battery and sub battery discon-
nected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
Work
INFOID:0000000012196575
• After removing and installing the opening/closing parts, be sure to carry out fitting adjustments to check their
operational.
• Check the lubrication level, damage, and wear of each part. If necessary, grease or replace it.
D4D engine
: 20 minutes
YS23DDT
: 4 minutes
HRA2DDT
: 12 minutes
YS23DDTT
: 4 minutes
K9K engine
: 4 minutes
ZD30DDTi
: 60 seconds
M9R engine
: 4 minutes
ZD30DDTT
: 60 seconds
R9M engine
: 4 minutes
V9X engine
: 4 minutes
YD25DDTi
: 2 minutes
SEF289H
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст