Nissan Juke F15. Instruction — part 1351
VTL-10
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
2. Remove fixing screws (A), and then remove side ventilator grille.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER GRILLE
SIDE DEFROSTER GRILLE : Removal and Installation
INFOID:0000000012199144
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Remove side defroster nozzle. Refer to
VTL-9, "SIDE DEFROSTER NOZZLE : Removal and Installation"
.
3. Remove fixing screw (A) and disengage fixing pawl (B), and
then remove side defroster grille.
INSTALLATION
Install in the reverse order of removal.
FRONT DEFROSTER NOZZLE
FRONT DEFROSTER NOZZLE : Removal and Installation
INFOID:0000000012199145
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Remove side defroster nozzle. Refer to
VTL-9, "SIDE DEFROSTER NOZZLE : Removal and Installation"
.
3. Remove fixing screw (A), and then remove front defroster noz-
zle.
INSTALLATION
Install in the reverse order of removal.
CENTER VENTILATOR DUCT
JMIIA0845ZZ
JMIIA0846ZZ
JMIIA0843ZZ
DUCT AND GRILLE
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
CENTER VENTILATOR DUCT : Removal and Installation
INFOID:0000000012199146
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Remove side defroster nozzle LH and RH. Refer to
VTL-9, "SIDE DEFROSTER NOZZLE : Removal and
.
3. Remove front defroster nozzle. Refer to
VTL-10, "FRONT DEFROSTER NOZZLE : Removal and Installa-
4. Remove fixing screws (A), and then remove center ventilator
duct.
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR DUCT
SIDE VENTILATOR DUCT : Removal and Installation
INFOID:0000000012199147
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Remove fixing screws (A), and then remove side ventilator duct.
INSTALLATION
Install in the reverse order of removal.
REAR HEATER DUCT 1
REAR HEATER DUCT 1 : Removal and Installation
INFOID:0000000012199148
REMOVAL
1. Remove center console assembly. Refer to
IP-24, "Removal and Installation"
.
JMIIA1043ZZ
Driver side
Passenger side
JMIIA0847ZZ
VTL-12
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
2. Disengage fixing pawls, and then remove rear heater duct 1.
(Models for Canada only)
INSTALLATION
Install in the reverse order of removal.
REAR HEATER DUCT 2
REAR HEATER DUCT 2 : Removal and Installation
INFOID:0000000012199149
REMOVAL
1. Remove center console assembly. Refer to
IP-24, "Removal and Installation"
2. Remove front seat assembly. Refer to
SE-21, "Removal and Installation"
3. Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-19, "KICKING PLATE INNER :
.
4. Remove center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
5. Remove dash side finisher. Refer to
INT-21, "DASH SIDE FINISHER : Removal and Installation"
.
6. Remove rear heater duct 2. (Models for Canada only)
• Peel off floor carpet (1).
• Remove rear heater duct 3 (2) from rear heater duct 2 (3).
• Remove front floor spacer, and then remove rear heater duct 2
(2) from rear heater duct 1 (1).
INSTALLATION
Install in the reverse order of removal.
REAR HEATER DUCT 3
REAR HEATER DUCT 3 : Removal and Installation
INFOID:0000000012199150
REMOVAL
: Pawl
JMIIA0848ZZ
: Vehicle front
JMIIA0849ZZ
: Vehicle front
JMIIA0850ZZ
DUCT AND GRILLE
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
1. Remove center console assembly. Refer to
IP-24, "Removal and Installation"
.
2. Remove front seat assembly. Refer to
SE-21, "Removal and Installation"
3. Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-19, "KICKING PLATE INNER :
.
4. Remove center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
5. Remove dash side finisher. Refer to
INT-21, "DASH SIDE FINISHER : Removal and Installation"
.
6. Remove rear heater duct 3. (Models for Canada only)
• Peel off floor carpet (1).
• Remove rear floor spacer, and then remove rear heater duct 3
(2) from rear heater duct 2 (3).
INSTALLATION
Install in the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation
INFOID:0000000012199151
REMOVAL
Driver Side
1. Remove instrument lower panel LH. Refer to
IP-13, "Removal and Installation"
2. Disconnect harness connector.
3. Remove harness connector fixing clamp.
4. Remove fixing screws, and then remove foot duct LH.
Passenger Side
1. Remove glove box assembly. Refer to
IP-13, "Removal and Installation"
2. Remove fixing screws, and then remove foot duct RH.
INSTALLATION
Install in the reverse order of removal.
: Vehicle front
JMIIA0849ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст