Nissan Juke F15. Instruction — part 200
REAR WINDOW DEFOGGER
DEF-25
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace condenser. Refer to
DEF-45, "Removal and Installation"
.
Condenser
Continuity
Connector
Terminal
Connector
Terminal
D103
1
D202
2
Existed
DEF-26
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR DEFOGGER
DOOR MIRROR DEFOGGER
Description
INFOID:0000000012196838
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000012196839
1.
CHECK DOOR MIRROR DEFOGGER
1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.
2. Touch “ON”.
3. Check that both side door mirror glasses are getting warmer.
Is the inspection result normal?
YES
>> Door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000012196840
1.
CHECK FUSE
1. Turn ignition switch OFF.
2. Check 10A fuse [No.22, located in fuse block (J/B)].
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK DOOR MIRROR DEFOGGER CIRCUIT
1. Disconnect IPDM E/R connector and door mirror (both sides) connector.
2. Check continuity between IPDM E/R harness connector and door mirror (driver side) harness connector.
3. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
GI-45, "Intermittent Incident"
>> INSPECTION END
IPDM E/R
Door mirror (driver side)
Continuity
Connector
Terminal
Connector
Terminal
E11
14
D30
3
Existed
IPDM E/R
Ground
Continuity
Connector
Terminal
E11
14
Not existed
DRIVER SIDE DOOR MIRROR DEFOGGER
DEF-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DRIVER SIDE DOOR MIRROR DEFOGGER
Description
INFOID:0000000012196841
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000012196842
1.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.
2. Touch “ON”.
3. Check that the driver side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Driver side door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000012196843
1.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect door mirror (driver side) connector.
3. Turn ignition switch ON.
4. Check voltage between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace door mirror glass (driver side). Refer to
MIR-17, "DOOR MIRROR ASSEMBLY : Removal
.
NO
>> Repair or replace harness.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Door mirror (driver side)
Connector
Terminal
D30
3
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
Door mirror (driver side)
Ground
Continuity
Connector
Terminal
D30
4
Existed
DEF-28
< DTC/CIRCUIT DIAGNOSIS >
PASSENGER SIDE DOOR MIRROR DEFOGGER
PASSENGER SIDE DOOR MIRROR DEFOGGER
Description
INFOID:0000000012196844
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000012196845
1.
CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER
1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.
2. Touch “ON”.
3. Check that the passenger side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Passenger side door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000012196846
1.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect door mirror (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace door mirror glass (passenger side). Refer to
MIR-17, "DOOR MIRROR ASSEMBLY :
NO
>> Repair or replace harness.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Door mirror (passenger side)
Connector
Terminal
D9
3
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
Door mirror (passenger side)
Ground
Continuity
Connector
Terminal
D9
4
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст