Nissan Juke F15. Instruction — part 905
INT-24
< REMOVAL AND INSTALLATION >
FLOOR TRIM
FLOOR TRIM
Exploded View
INFOID:0000000012199179
Removal and Installation
INFOID:0000000012199180
REMOVAL
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the body.
1. Remove front seat assembly (LH and RH). Refer to
SE-21, "Removal and Installation"
2. Remove rear seat cushion. Refer to
SE-32, "SEAT CUSHION : Removal and Installation"
.
3. Remove center console assembly. Refer to
IP-24, "Removal and Installation"
4. Remove instrument stay.
1.
Floor carpet
2.
Carpet hook
3.
Trim clip
4.
Column hole cover
5.
Harness clip
6.
Front floor spacer RH
7.
Front floor spacer LH
8.
Rear floor spacer LH
9.
Rear floor spacer RH
: Clip
: Pawl
JMJIA4530ZZ
FLOOR TRIM
INT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
Remove instrument stay mounting nuts (A), and then remove
instrument stay.
5. Disconnect drain hose. Refer to
HA-43, "A/C UNIT ASSEMBLY : Removal and Installation"
.
6. Remove foot ducts (LH and RH). Refer to
VTL-13, "FOOT DUCT : Removal and Installation"
(Models with
foot ducts).
7. Remove shift selector assembly
• 6MT models: Refer to
TM-25, "Removal and Installation"
• CVT models: Refer to
TM-316, "Removal and Installation"
8. Remove diagnosis sensor unit. Refer to
SR-29, "Removal and Installation"
.
9. Remove parking brake lever. Refer to
PB-7, "Removal and Installation"
10. Remove center pillar lower garnish (LH and RH). Refer to
INT-22, "CENTER PILLAR LOWER GARNISH :
.
11. Remove column hole cover.
Disengage trim clip (A), and then remove column hole cover.
12. Remove dash side finisher (LH and RH). Refer to
INT-21, "DASH SIDE FINISHER : Removal and Installa-
13. Disengage pawl using a remover tool (A) and open the harness
clip.
14. Remove floor carpet.
NOTE:
: Vehicle front
JMJIA4531ZZ
JMJIA4532ZZ
: Pawl
JMJIA4396ZZ
INT-26
< REMOVAL AND INSTALLATION >
FLOOR TRIM
Disengage pawls using a remover tool and remove carpet hook.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
Replace diagnosis sensor unit fixing bolts with a new part after removal. Never reuse diagnosis sen-
sor unit fixing bolts.
: Pawl
JMJIA3620ZZ
HEADLINING
INT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
HEADLINING
NORMAL ROOF
NORMAL ROOF : Exploded View
INFOID:0000000012199181
NORMAL ROOF
NORMAL ROOF : Removal and Installation
INFOID:0000000012199182
REMOVAL
JMJIA4533ZZ
1.
Headlining assembly
2.
Assist grip clip
3.
Rear assist grip RH
4.
Front assist grip RH
5.
Sun visor assembly RH
6.
Sun visor cover RH
7.
Sun visor cover LH
8.
Sun visor assembly LH
9.
Rear assist grip LH
10. Headlining clip
11. Sun visor holder RH
12. Map lamp
13. Sun visor holder LH
14. Metal clip
: Clip
: Pawl
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст