Nissan Juke F15. Instruction — part 997
MWI-10
< SYSTEM DESCRIPTION >
SYSTEM
METER SYSTEM : Fail-Safe
INFOID:0000000012839331
FAIL-SAFE
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
A.
For U.S.A.
B.
For Canada
JSNIA8950ZZ
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Illumination control
When suspending communication, changes to nighttime mode.
Shift position indicator
When suspending communication, not indicate.
Information display
Instantaneous fuel consumption
• When reception time of an abnormal signal is 2 seconds or
less, the last received datum is used for calculation to indi-
cate the result.
• When reception time of an abnormal signal is more than two
seconds, the last result calculated during normal condition is
indicated.
Average fuel consumption
Possible driving distance
Torque distribution indicator
Low tire pressure warning
The display turns OFF by suspending communication.
Buzzer
The buzzer turns OFF by suspending communication.
MWI
SYSTEM
MWI-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000012201298
SPEEDOMETER : System Description
INFOID:0000000012201299
• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel
sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication.
• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-
nal received via CAN communication.
TACHOMETER
Warning lamp/indicator lamp
ABS warning lamp
The lamp turns ON by suspending communication.
Malfunction indicator lamp
VDC warning lamp
EPS warning lamp
AWD warning lamp
Brake warning lamp
VDC OFF indicator lamp
The lamp turns OFF by suspending communication.
High beam indicator lamp
Turn signal indicator lamp
Door warning lamp
Tail lamp indicator lamp
Engine start operation indicator lamp
Shift P warning lamp
Front fog lamp indicator lamp
Oil pressure warning lamp
CRUISE indicator lamp
AWD mode indicator lamp (AWD)
AWD mode indicator lamp (AWD-V)
Key warning lamp
CVT indicator lamp
Low tire pressure warning lamp
After blinking for 1 minute, the lamp remains ON.
High coolant temperature indicator
lamp
When reception time of an abnormal signal is more than 60
seconds, the lamp turns OFF.
Function
Specifications
JSNIA2973GB
MWI-12
< SYSTEM DESCRIPTION >
SYSTEM
TACHOMETER : System Diagram
INFOID:0000000012201300
CVT models
M/T models
TACHOMETER : System Description
INFOID:0000000012201301
CVT models
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the TCM via CAN communication.
• TCM transmits the engine speed signal received from ECM via CAN communication to the combination
meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
M/T models
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the combination meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000012201302
JSNIA7198GB
JSNIA2974GB
JSNIA6671GB
MWI
SYSTEM
MWI-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT POSITION INDICATOR : System Description
INFOID:0000000012201303
The combination meter receives the shift position signal from TCM via CAN communication, and displays the
shift position to the shift position indicator.
MANUAL MODE
When operated with CVT shift selector
• The combination meter receives the instruction mode signal, non-instruction mode signal, manual mode shift up
signal, and instruction mode shift down signal from CVT shift selector and transmits them to TCM via CAN com-
munication.
• TCM recognizes the instruction mode operation status according to the instruction mode signal, non-manual mode
signal, instruction mode shift up signal, and instruction mode shift down signal received via CAN communication
and transmits the instruction mode indicator signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal received via CAN com-
munication.
When operated with paddle shifter
• The combination meter receives the instruction mode signal from CVT shift selector, paddle shifter up signal
and paddle shifter down signal from paddle shifter and transmits them to TCM via CAN communication.
• TCM recognizes the instruction mode operation status according to the instruction mode signal, manual mode
shift up signal, and instruction mode shift down signal received via CAN communication and transmits the shift
position signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal via CAN communication.
NON-MANUAL MODE
• TCM transmits the shift position signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal received via CAN com-
munication.
SHIFT REFUSAL WARNING AND ALARM
• TCM sends a instruction mode shift refusal signal to the combination meter via CAN communication when shift-
up and shift-down can not be operated in instruction mode.
• The combination meter blinks the shift position indicator and sounds a buzzer according to a instruction mode
shift refusal signal received via CAN communication.
OIL PRESSURE WARNING LAMP
OIL PRESSURE WARNING LAMP : System Diagram
INFOID:0000000012201304
OIL PRESSURE WARNING LAMP : System Description
INFOID:0000000012201305
The combination meter turns the oil pressure warning lamp ON when receiving ECM to the oil pressure warn-
ing lamp signal via CAN communication. For details, refer to
EC-45, "Oil Pressure Warning Lamp"
NISMO RS models) or
EC-619, "Oil Pressure Warning Lamp"
(MR except for NISMO RS models).
METER ILLUMINATION CONTROL
JSNIA3115GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст