Nissan Juke F15. Instruction — part 716
EXL-84
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Headlamp (LO) is not
turned ON
One side
• Fuse
• Headlamp (LO) power supply/
ground circuit
• Headlamp (LO) bulb
(Xenon bulb)
• Headlamp assembly
- HID control unit
- Xenon bulb socket
- Harness
• IPDM E/R
Headlamp (LO) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON”
Refer to
Parking lamp is not turned ON
• Parking lamp power supply/
ground circuit
• Front combination lamp
- LED (Parking lamp)
- Harness
• IPDM E/R
Parking lamp circuit
Refer to
Front side marker lamp is not turned ON
• Front side marker lamp power
supply/ground circuit
• Front side marker lamp bulb
• Front side marker lamp bulb sock-
et
Front side marker lamp circuit
Refer to
Tail lamp is not turned ON
Stop lamp / Tail lamp
(Bulb side)
• Fuse
• Tail lamp power supply/ground
circuit
• Stop lamp / Tail lamp bulb
• Stop lamp / Tail lamp bulb socket/
harness
• IPDM E/R
Tail lamp circuit
Refer to
Tail lamp (LED side)
• Fuse
• Tail lamp power supply/ground
circuit
• Rear combination lamp internal
circuit
- LED (Tail lamp)
• Tail lamp harness
• IPDM E/R
License plate lamp is not turned ON
• License plate lamp power supply/
ground circuit
• License plate lamp bulb
• License plate lamp bulb socket/
harness
License plate lamp circuit
Refer to
Parking lamp, license plate lamp, side marker lamp and
tail lamp are not turned ON
Symptom diagnosis
“PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON”
Refer to
Position lamp indicator is not turned ON
(Parking lamp, license plate lamp, side marker lamp
and tail lamp are turned ON)
Combination meter
• Combination meter
Data monitor “LIGHT IND”
• BCM (HEAD LAMP)
Active test “TAIL LAMP”
Daytime running light is not turned ON
• Fuse
• Daytime running light power sup-
ply/ground circuit
• Daytime running light
• IPDM E/R
• BCM
• ECM
• Combination meter
• Daytime running light circuit
Refer to
• BCM (HEAD LAMP)
Data monitor “ENGINE STATE”
• Combination meter
Data monitor “PKB SW”
Symptom
Possible cause
Inspection item
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-85
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Turn signal lamp does not
blink
Indicator lamp is normal
(Applicable side per-
forms high flasher activa-
tion)
• Front turn signal lamp
- Front turn signal lamp power sup-
ply/ground circuit
- Front turn signal lamp bulb
- Front turn signal lamp bulb socket
- BCM
• Side turn signal lamp
- Side turn signal lamp power sup-
ply/ground circuit
- Side turn signal lamp
- BCM
• Rear turn signal lamp
- Rear turn signal lamp power sup-
ply/ground circuit
- Rear turn signal lamp bulb
- Rear turn signal lamp bulb socket/
harness
- BCM
Turn signal lamp circuit
Refer to
Indicator lamp is included
• Combination switch input/output
signal circuit
• Combination switch
• BCM
Combination switch
Refer to
Turn signal indicator lamp
does not blink
(Turn signal lamp is normal)
One side
Combination meter
—
Both sides
(Always)
• Turn indicator signal
• BCM
• Combination meter
• Combination meter
Data monitor “TURN IND”
• BCM (FLASHER)
Active test “FLASHER”
Both sides
(Only when activating
hazard warning lamp
with ignition switch OFF)
• Combination meter power supply/
ground circuit
• Combination meter
Combination meter
Power supply and ground circuit
Refer to
• Hazard warning lamp does not activate
(Turn signal is normal)
• Hazard warning lamp continues activating
• Hazard switch signal/ground cir-
cuit
• Hazard switch
• BCM
Hazard switch
Refer to
Symptom
Possible cause
Inspection item
EXL-86
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000012201664
XENON HEADLAMP
• Brightness and the color of light may change slightly immediately after turning the headlamp ON until the
xenon bulb becomes stable. This is normal.
• Illumination time lag may occur between right and left. This is normal.
AUTO LIGHT SYSTEM
The headlamp may not be turned ON/OFF immediately after passing dark area or bright area (short tunnel,
sky bridge, shadowed area, etc.) while using the auto light system. This is caused by for the control difference.
This is normal.
BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON
EXL-87
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON
Description
INFOID:0000000012201665
Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.
Diagnosis Procedure
INFOID:0000000012201666
1.
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
1. Turn ignition switch ON.
2. Select “HL HI REQ” in “Data Monitor” mode of “IPDM E/R” using CONSULT.
3. With operating the lighting switch, check the monitor status.
Is the inspection result normal?
YES
>> Replace IPDM E/R. Refer to
PCS-37, "Removal and Installation"
.
NO
>> Replace BCM. Refer to
BCS-94, "Removal and Installation"
Monitor item
Condition
Monitor status
HL HI REQ
Lighting switch
(2ND)
HI or PASS
On
LO
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст