Nissan Juke F15. Instruction — part 990
PRECAUTIONS
MIR-3
< PRECAUTION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
• Turbocharger cooling pump may operate in a few minutes after the ignition switch is turned OFF.
• Example of high-load driving
- Driving for 30 minutes or more at 140 km/h (86 MPH) or more.
- Driving for 30 minutes or more on a steep slope.
• For vehicles with the 2-batteries, be sure to connect the main battery and the sub battery before turning ON
the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of main battery and sub battery discon-
nected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
MIR-4
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000012201500
Tool name
Description
Remover tool
Removes the clips, pawls and metal clips
JMKIA3050ZZ
COMPONENT PARTS
MIR-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Description
INFOID:0000000012201501
Item
Function
Door mirror remote control switch (mir-
ror switch)
It supplies power to mirror motor through mirror switch and changeover switch.
Door mirror remote control switch
(changeover switch)
It transmits the LH/RH control of door mirror that supplies power.
Door mirror motor
It makes mirror face operate from side to side and up and down via integrated motor.
MIR-6
< WIRING DIAGRAM >
DOOR MIRROR SYSTEM
WIRING DIAGRAM
DOOR MIRROR SYSTEM
Wiring Diagram
INFOID:0000000012201502
JRLWF5308GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст