Volvo V90 Cross Country (2019 year). Manual — part 21
||
DRIVER SUPPORT
354
given, the indicator light will become brighter and
begin flashing.
The light illuminates on the side of the vehicle
where the system has detected the vehicle. If
the vehicle is passed on both sides simulta-
neously, both lights come on.
WARNING
•
The BLIS function is supplementary driver
support intended to facilitate driving and
help make it safer – it cannot handle all
situations in all traffic, weather and road
conditions.
•
The responsibility for changing lanes
safely and using good judgment always
rests with the driver.
•
BLIS is not a substitute for the driver's
attention and judgment. The driver is
always responsible for ensuring the vehi-
cle is driven in a safe manner, at the
appropriate speed, with an appropriate
distance to other vehicles, and in accord-
ance with current traffic rules and regula-
tions.
Related information
•
Activating/deactivating BLIS (p. 354)
•
•
Recommended maintenance for BLIS
(p. 356)
•
Activating/deactivating BLIS
The BLIS
74
function can be activated/deacti-
vated.
Location of BLIS indicator light.
75
Indicator light
The BLIS button in the center display's Func-
tion view is used to activate/deactivate the
function.
–
Tap the
BLIS
button in Function view.
> The BLIS indicator light shows the status
of the function: GREEN (on) or GRAY
(off).
If BLIS is activated when the engine is started,
the indicator lights in the rearview mirrors will
flash once.
If BLIS is deactivated when the engine is turned
off, it will remain off the next time the engine is
started and the indicator lights will not illuminate.
DRIVER SUPPORT
* Option/accessory.
355
Related information
•
BLIS limitations
BLIS
76
functionality may be reduced in certain
situations.
Keep the marked area clean (on both the left and right
sides of the vehicle)
77
.
Examples of limitations:
•
Dirt, ice and snow covering the sensors may
reduce functionality and prevent the system
from providing warnings.
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle holder or similar is
connected to the vehicle's electrical system.
•
For BLIS to function optimally, bicycle hold-
ers, luggage racks or similar should not be
mounted on the vehicle's towbar.
WARNING
•
BLIS does not work in sharp curves.
•
BLIS does not work when the vehicle is
being reversed.
Related information
•
74
Blind Spot Information
75
Note: This illustration is general and details may vary depending on model.
76
Blind Spot Information
77
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
356
Recommended maintenance for
BLIS
•
For optimal performance, it is important to
keep the areas in front of the sensors clean.
•
Do not attach any objects, tape or decals to
the surface of the sensors.
Keep the marked area clean (on both the left and right
sides of the vehicle)
78
.
The BLIS sensors are located on the inside of
each of the rear fenders/bumpers and are also
used by the Cross Traffic Alert (CTA) and Rear
Collision Warning functions.
Repair of BLIS and CTA components or
repainting of the bumper may only be per-
formed by a workshop – an authorized Volvo
workshop is recommended.
Related information
•
•
•
Activating/deactivating Cross Traffic Alert
(p. 359)
•
Cross Traffic Alert limitations (p. 359)
•
Recommended maintenance for Cross
Traffic Alert (p. 360)
•
Cross Traffic Alert messages (p. 361)
•
Rear Collision Warning (p. 352)
78
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
357
BLIS messages
A number of messages related to BLIS
79
may
be displayed in the instrument panel.
Some examples of symbols and messages are shown in the table below.
Message
Meaning
Blind spot sensor
Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is recommended.
Blind spot system off
Trailer attached
BLIS and CTA have been deactivated because a trailer has been connected to the vehicle's electrical system.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
79
Blind Spot Information
DRIVER SUPPORT
* Option/accessory.
358
Cross Traffic Alert*
CTA
80
is a supplementary driver support system
to BLIS
81
that is intended to help the driver
detect vehicles crossing behind the vehicle
while backing up.
CTA overview.
CTA supplements BLIS by detecting traffic cross-
ing from the side, e.g. when backing out of a
parking space.
CTA is primarily designed to detect vehicles, but
in certain cases can also detect pedestrians or
smaller objects such as bicycles.
CTA is only active when the vehicle is moving
backward or if reverse gear is engaged.
If CTA detects that something is approaching
your vehicle from the side:
•
an audible signal will sound from either the
left or right speaker, depending on which
side of your vehicle the object is approaching
from.
•
an icon will illuminate in the PAS
82
graphic
on the screen.
•
an icon will appear in the Park Assist Cam-
era's Top view.
Illuminated CTA icon in the PAS graphic
83
on the
screen.
WARNING
•
The Cross Traffic Alert function is supple-
mentary driver support intended to facili-
tate driving and make it safer – it cannot
handle all situations in all traffic, weather
and road conditions.
•
The responsibility for reversing the vehicle
safely and using good judgment always
rests with the driver.
•
Cross Traffic Alert is not a substitute for
the driver's attention and judgment. The
driver is always responsible for ensuring
the vehicle is driven in a safe manner, at
the appropriate speed, with an appropri-
ate distance to other vehicles, and in
accordance with current traffic rules and
regulations.
Related information
•
Activating/deactivating Cross Traffic Alert
(p. 359)
•
Cross Traffic Alert limitations (p. 359)
•
Recommended maintenance for Cross
Traffic Alert (p. 360)
•
Cross Traffic Alert messages (p. 361)
80
Cross Traffic Alert
81
Blind Spot Information
82
Park Assist System: Parking assistance with reversing sensors
83
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
}}
* Option/accessory.
359
Activating/deactivating Cross Traffic
Alert
The driver can choose to deactivate the CTA
84
function as follows:
Press the
Cross Traffic Alert
button in the center display's
Function view.
•
GRAY button indicator light - CTA is deacti-
vated.
•
GREEN button indicator light - CTA is acti-
vated.
CTA is automatically activated each time the
engine is started.
Related information
•
Cross Traffic Alert limitations
CTA
85
functionality may be reduced in certain
situations.
CTA does not function optimally in all situations
and has certain limitations. The CTA sensors, for
example, cannot "see" through other parked
vehicles or objects blocking the vehicle.
Below are a few examples of situations in which
CTA's field of vision may be initially limited and
approaching vehicles may therefore not be
detected until they are very close to your vehicle:
The vehicle is parked very far into a parking space.
In a diagonal parking space, CTA may be completely
"blind" on one side of your vehicle.
CTA's blind zone.
CTA's field of vision.
However, as you back your vehicle slowly out of a
parking space, CTA's field of vision changes in
relation to the obstructing vehicle/object and its
blind zone is reduced.
84
Cross Traffic Alert
85
Cross Traffic Alert
||
DRIVER SUPPORT
* Option/accessory.
360
Examples of further limitations
•
Dirt, ice and snow covering the sensors may
reduce functionality and prevent the system
from providing warnings. For additional infor-
mation, see the section "Recommended
maintenance for Cross Traffic Alert".
•
CTA is automatically deactivated if a trailer,
bicycle holder or similar is connected to the
vehicle's electrical system.
•
For CTA to function optimally, bicycle hold-
ers, luggage racks or similar should not be
mounted on the vehicle's towbar.
Related information
•
•
Recommended maintenance for Cross
Traffic Alert (p. 360)
Recommended maintenance for
Cross Traffic Alert
•
For optimal performance, it is important to
keep the areas in front of the sensors clean.
•
Do not attach any objects, tape or decals to
the surface of the sensors.
Keep the marked area clean (on both the left and right
sides of the vehicle)
86
.
The CTA sensors are located on the inside of
each of the rear fenders/bumpers and are also
used by the BLIS
87
and Rear Collision Warning
functions.
Repair of BLIS and CTA components or
repainting of the bumper may only be per-
formed by a workshop – an authorized Volvo
workshop is recommended.
Related information
•
•
•
Rear Collision Warning (p. 352)
86
Note: This illustration is general and details may vary depending on model.
87
Blind Spot Information
DRIVER SUPPORT
* Option/accessory.
361
Cross Traffic Alert messages
A number of messages related to CTA
88
may be
displayed in the instrument panel.
Some examples of symbols and messages are shown in the table below.
Message
Meaning
Blind spot sensor
Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is recommended.
Blind spot system off
Trailer attached
BLIS and CTA have been deactivated because a trailer has been connected to the vehicle's electrical system.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
88
Cross Traffic Alert
DRIVER SUPPORT
* Option/accessory.
362
Road Sign Information*
The Road Sign Information (RSI
89
) function can
help the driver observe speed-related road
signs.
Examples of signs that can be detected
90
.
Example
90
of registered speed information.
If the vehicle passes a speed limit sign, it will be
displayed in the instrument panel and the head-
up display*.
In certain markets, the Road Sign Information
function (RSI) is only available in combination
with Sensus Navigation*.
WARNING
•
The Road Sign Information function is
supplementary driver support intended to
facilitate driving and help make it safer –
it cannot handle all situations in all traffic,
weather and road conditions.
•
Road Sign Information is not a substitute
for the driver's attention and judgment.
The driver is always responsible for
ensuring the vehicle is driven in a safe
manner, at the appropriate speed, with an
appropriate distance to other vehicles,
and in accordance with current traffic
rules and regulations.
Related information
•
Activating/deactivating Road Sign Informa-
tion (p. 363)
•
Road Sign Information and sign displays
(p. 364)
•
Road Sign Information and Sensus
Navigation (p. 364)
•
Road Sign Information with Speed Warning
and Settings (p. 365)
•
Activating/deactivating Speed Warning in
Road Sign Information (p. 366)
89
Road Sign Information
90
Road signs differ according to market
‒ the illustrations shown here are just some examples.
DRIVER SUPPORT
* Option/accessory.
363
•
Road Sign Information with speed camera
information (p. 366)
•
Road Sign Information limitations (p. 367)
Activating/deactivating Road Sign
Information
The Road Sign Information function can be
switched On or Off.
Press the
Road Sign
Information
button in the cen-
ter display's Function view.
•
GREEN button indicator light - RSI is acti-
vated.
•
GRAY button indicator light - RSI is deacti-
vated.
•
If the Automatic Speed Limiter function is
activated, road sign information is shown
in the driver display even if RSI
91
is not
activated.
•
To remove road sign information from the
driver display, you must deactivate both
Automatic Speed Limiter and RSI.
•
When the Automatic Speed Limiter func-
tion is activated but RSI is deactivated, no
warnings are given from RSI. RSI must
also be activated for warnings to be pos-
sible.
Related information
•
Road Sign Information* (p. 362)
91
Road Sign Information (RSI)
DRIVER SUPPORT
* Option/accessory.
364
Road Sign Information and sign
displays
Road Sign Information (RSI
92
) displays road
signs in different ways depending on the sign
and situation.
Example
93
of registered speed information.
When RSI has registered a speed limit sign, the
sign will be displayed as a symbol in the instru-
ment panel and a colored marking will be shown
in the speedometer's speed scale.
If the vehicle is equipped with Sensus
Navigation*, speed-related information will also
be retrieved from map data, which means that the
instrument panel can display or change informa-
tion about speed limits even if the vehicle has not
passed a speed-related sign.
Signs for "School" and "Children
playing"
If the warning sign
93
"School"
or "Children playing" is
included in the satellite naviga-
tor's map data
94
, a symbol of
this type will be displayed in the
instrument panel.
Related information
•
Road Sign Information* (p. 362)
•
Activating/deactivating Road Sign Informa-
tion (p. 363)
•
Road Sign Information with Speed Warning
and Settings (p. 365)
Road Sign Information and Sensus
Navigation
If the vehicle is equipped with Sensus Navigation,
speed-related information will be provided in the
following situations:
•
In cases where the speed limit is given indi-
rectly, e.g. signs for highways or other major
roads.
•
If a previously detected speed sign is
deemed to be no longer valid and no new
sign has been passed.
In certain markets, the Road Sign Information
function (RSI) is only available in combination
with Sensus Navigation*.
If a downloaded third-party app is used for
navigation, there is no support for speed-rela-
ted information.
Related information
•
Road Sign Information* (p. 362)
92
Road Sign Information
93
Road signs differ according to market
‒ the illustrations shown here are just examples.
94
Only vehicles with Sensus Navigation*.
DRIVER SUPPORT
}}
* Option/accessory.
365
Road Sign Information with Speed
Warning and Settings
The
Speed Limit Warning
sub-function for
RSI
95
can be switched On or Off.
Speed Limit Warning
warns the driver if the
vehicle's speed has exceeded the applicable
speed limit or the preset Speed Limiter speed.
The warning will be repeated once after
about 1 minute in that speed limit area if the
driver does not slow down.
A new warning and message indicating that the
speed limit has been exceeded will be provided
only when the vehicle has entered a new/differ-
ent speed limit area.
When Speed Warning is acti-
vated, the symbol for the cur-
rent speed limit in the instru-
ment panel
96
will flash tempo-
rarily if that speed is exceeded.
The driver can be alerted if the
vehicle is exceeding a detected
speed limit and is approaching
a speed camera.
Settings
Adjusting the Speed Warning limit
The driver can adjust the settings to be alerted at
a higher speed than the posted speed limit.
To adjust the Speed Warning limit:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Mark
Speed Limit Warning
.
> The function is activated and a speed limit
selector is displayed.
3. Tap the up/down arrows on the screen to
adjust the speed at which the Speed Warn-
ing will be given.
Please note that the set warn-
ing limit will not be used when
a speed camera symbol is dis-
played in the instrument panel.
Audible alert On/Off
An audible alert can also be given along with the
Speed Warning.
To adjust the audible alert settings:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Select/deselect
Road Sign Audio Warning
to activate/deactivate the audible alert.
When
Road Sign Audio Warning
is activated,
the driver will also be alerted if the vehicle is
approaching a one-way/"no-entry" road or
entrance.
Speed camera warning On/Off
If the vehicle is equipped with
Sensus Navigation* and map
data contains information on
speed cameras, the driver can
choose to receive an audible
alert if the vehicle is approach-
ing a speed camera.
To adjust the audible alert settings:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Select/deselect
Speed Camera Audio
Warning
to activate/deactivate the speed
camera audible alert.
95
Road Sign Information
96
Road signs differ according to market
‒ the illustration shown here is just an example.
||
DRIVER SUPPORT
* Option/accessory.
366
Related information
•
Road Sign Information* (p. 362)
•
Road Sign Information with speed camera
information (p. 366)
Activating/deactivating Speed
Warning in Road Sign Information
To activate the
Speed Limit Warning
sub-func-
tion:
1. Select
Settings
My Car
IntelliSafe
Road Sign Information
in the center
display's Top view.
2. Mark
Speed Limit Warning
.
> The function is activated and a speed limit
selector is displayed.
(See description for “Adjusting the Speed
Warning limit” in section “Road Sign Infor-
mation with Speed Warning and Set-
tings.”)
Related information
•
Road Sign Information* (p. 362)
•
Road Sign Information with Speed Warning
and Settings (p. 365)
Road Sign Information with speed
camera information
Vehicles equipped with RSI
97
and Sensus
Navigation* can provide information on upcom-
ing speed cameras in the instrument panel.
Speed camera information in the instrument panel
98
.
If the vehicle exceeds a
detected speed limit with the
Speed Limit Warning
func-
tion activated, the driver is
given a speed warning when
the vehicle is approaching a
speed camera if the navigation
map for the vehicle's current location contains
information on speed cameras.
97
Road Sign Information
98
Note: This illustration is general and details may vary depending on model and market/region.
DRIVER SUPPORT
}}
* Option/accessory.
367
For more information on Speed Warnings in con-
junction with speed cameras, also see “Road
Sign Information with Speed Warning and Set-
tings” and “Road Sign Information limitations”.
•
For an audible alert to be provided if the
speed is exceeded, the
Speed Limit
Warning
function must be activated and
the
Road Sign Audio Warning
sub-
function must be On. Audible alerts are
provided if the vehicle's speed exceeds
the speed displayed by RSI in the instru-
ment panel.
•
It is possible to receive an audible alert
for speed cameras regardless of the vehi-
cle's speed, whether or not the speed
limit is exceeded, and even if the
Road
Sign Audio Warning
function is deacti-
vated: See heading "
Speed camera
warning
On/Off" in section "Road Sign
Information with Speed Warning and set-
tings" and select
Speed Camera Audio
Warning
there.
•
Information about speed cameras on the
navigation map is not available for all
markets/areas.
Related information
•
Road Sign Information* (p. 362)
•
Road Sign Information with Speed Warning
and Settings (p. 365)
•
Road Sign Information limitations (p. 367)
Road Sign Information limitations
Road Sign Information (RSI
99
) functionality may
be reduced in certain situations.
RSI could have reduced functionality due to e.g.:
•
faded road signs
•
signs located in a curve in the road
•
twisted or damaged signs
•
signs positioned high above the road
•
fully/partially obstructed or poorly positioned
signs
•
signs partially or fully covered by frost, snow
and/or dirt
•
digital road maps
100
that are outdated, incor-
rect or do not contain speed information
101
.
Certain types of bike carriers that are con-
nected to the trailer socket may be interpre-
ted as a connected trailer by the RSI function.
In such cases, the instrument panel may indi-
cate incorrect speed information.
99
Road Sign Information
100
Vehicles equipped with Sensus Navigation*.
101
Map data and speed information is not available for all areas.
||
DRIVER SUPPORT
* Option/accessory.
368
The function uses the vehicle's camera unit,
which has some general limitations – see the
section "Camera unit limitations".
Related information
•
Road Sign Information* (p. 362)
•
Driver Alert Control
The Driver Alert Control (DAC) function is
designed to help capture the driver become
aware of erratic behavior, e.g. if the driver is dis-
tracted or showing signs of fatigue.
The objective of DAC is to detect slowly deterio-
rating driving behavior and is primarily intended to
be used on major roads. The function is not
intended for use in city traffic.
DAC is activated when the vehicle's speed
exceeds 65 km/h (40 mph) and remains active
as long as speeds are above 60 km/h (37 mph).
DAC detects the vehicle's position in the traffic lane.
A camera monitors the traffic lane's marker lines
and compares the direction of the road with the
driver's movements of the steering wheel.
The vehicle is moving erratically in the lane.
If driving behavior becomes
considerably erratic, the driver
will be alerted by this symbol in
the instrument panel, an audi-
ble signal and the message
Time for a break
.
If the vehicle is equipped with Sensus
Navigation* and the
Rest Stop Guidance
func-
tion is activated, a suitable place to take a break
will also be suggested (see section “Selecting
guidance to a rest stop if a Driver Alert Control
warning has been given”).
The warning will be repeated after a short time if
driving behavior does not improve.
DRIVER SUPPORT
369
WARNING
•
The Driver Alert Control function is sup-
plementary driver support intended to
facilitate driving and help make it safer –
it cannot handle all situations in all traffic,
weather and road conditions.
•
Driver Alert Control must not be used to
extend a period of driving. The driver
should plan in breaks at regular intervals
and make sure they are well rested.
•
Driver Alert Control is not a substitute for
the driver's attention and judgment. The
driver is always responsible for ensuring
the vehicle is driven in a safe manner, at
the appropriate speed, with an appropri-
ate distance to other vehicles, and in
accordance with current traffic rules and
regulations.
WARNING
An alarm from Driver Alert Control should be
taken very seriously since a sleepy driver is
often not aware of their own condition.
If the alarm sounds or you feel fatigued:
•
Stop the vehicle safely as soon as possi-
ble and rest.
Studies have shown that it is just as danger-
ous to drive while tired as it is to drive under
the influence of alcohol or other stimulants.
Related information
•
Activating/deactivating Driver Alert Control
(p. 369)
•
Selecting guidance to a rest area if the
Driver Alert Control warning has been given
(p. 370)
•
Driver Alert Control limitations (p. 370)
Activating/deactivating Driver Alert
Control
The Driver Alert Control (DAC) function can be
activated/deactivated.
On/Off
To change DAC settings:
1. Tap
Settings
in the center display's Top
view.
2. Select
My Car
IntelliSafe
Driver Alert
Control
.
3. Select/deselect
Alertness Warning
to acti-
vate/deactivate DAC.
Related information
•
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст