Volvo S90 Twin Engine (2019 year). Manual — part 23
DRIVER SUPPORT
}}
395
Park Assist Camera limitations
The Park Assist Camera may not be able to
detect all conditions in all situations and func-
tionality may therefore be limited.
The driver should be aware of the following limi-
tations for the Park Assist Camera:
WARNING
Be extra cautious when
reversing if this symbol is
shown when a trailer, bike
carrier or similar is attached
and electrically connected
to the vehicle.
The symbol indicates that
the rear parking assist sensors are deacti-
vated and will not warn of any obstacles.
A bike carrier and other accessories mounted
on the rear of the vehicle can obscure the
camera's view.
Blind sectors
There are "blind" sectors between the cameras' fields of
vision.
With 360° view selected, objects/obstacles may
not be detected if they are located in the "joints"
where the edges of the individual camera views
meet.
WARNING
Even if it seems as though only a fairly small
section of the screen image is obstructed, this
may mean that a relatively large sector is hid-
den and obstacles there may not be detected
until they are very near the vehicle.
Defective camera
If a camera sector is dark and
contains this symbol, this indi-
cates that the camera is not
functioning properly.
See the following illustration for
an example.
The vehicle's left-side camera is malfunctioning.
Dark camera sector
A dark camera sector may also be displayed in
the following situations, but without the defective
camera symbol:
•
a door is open
•
the trunk lid is open
•
a rearview mirror is folded in
Lighting conditions
The camera image is automatically adjusted
according to the current lighting conditions. This
||
DRIVER SUPPORT
* Option/accessory.
396
means that the brightness and quality of the
image may vary slightly. Poor lighting conditions
may result in reduced image quality.
Related information
•
Recommended maintenance of the
Park Assist Camera
Each of the Park Assist Cameras, located above
the license plate, the grille and in both door mir-
rors, require a certain degree of maintenance.
Clean the camera lenses regularly using luke-
warm water and car washing detergent. Wash
gently to avoid scratching the lens.
Keep the camera lens free of dirt, snow and
ice to help ensure the best functionality. This
is particularly important in poor light condi-
tions.
Related information
•
DRIVER SUPPORT
* Option/accessory.
397
Park Assist Camera symbols and
messages
Symbols and messages for the Park Assist
Camera may be displayed in the instrument
panel and/or the center display.
Some examples of symbols and messages are shown in the table below.
Symbol
Message
Meaning
The rear Park Assist sensors are turned off and no acoustic warnings or field markings for obsta-
cles/objects will be provided.
The camera is not functioning properly.
Park Assist System
Sensors blocked, cleaning
needed
One or more of the sensors are blocked. Check and clean/remove the obstacle as soon as possible.
Park Assist System
Unavailable Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is
recommended.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
DRIVER SUPPORT
* Option/accessory.
398
Park Assist Pilot*
Park Assist Pilot (PAP
117
) helps the driver pull
into and out of parking spaces.
PAP first checks whether there
is sufficient space and then
steers the car into the space.
The center display uses sym-
bols, graphics and messages to
inform the driver of what steps
need to be taken and when.
WARNING
•
The PAP function is supplementary driver
support intended to facilitate driving and
help make it safer – it cannot handle all
situations in all traffic, weather and road
conditions.
•
Pay particular attention to people and
animals near the vehicle.
•
PAP is not a substitute for the driver's
attention and judgment. The driver is
always responsible for ensuring the vehi-
cle is driven in a safe manner, at the
appropriate speed, with an appropriate
distance to other vehicles, and in accord-
ance with current traffic rules and regula-
tions.
The PAP function measures the space and
steers the vehicle – the driver's role is to:
•
keep close watch of the area around the
vehicle
•
follow the instructions on the center dis-
play
•
change gears (reverse/forward) – a
"ping" sound indicates when the driver
should change gears
•
regulate and maintain a safe speed
•
apply the brakes and stop.
Related information
•
Types of parking with Park Assist Pilot
(p. 398)
•
Parking with Park Assist Pilot (p. 400)
•
Leaving a parking space with Park Assist
Pilot (p. 402)
•
Park Assist Pilot* limitations (p. 403)
•
Recommended maintenance for Park Assist
Pilot (p. 405)
•
Park Assist Pilot* messages (p. 406)
Types of parking with Park Assist
Pilot
Park Assist Pilot (PAP
118
) can be used for the
following types of parking.
117
Park Assist Pilot
118
Park Assist Pilot
DRIVER SUPPORT
* Option/accessory.
399
Parallel parking
Overview of parallel parking.
The PAP function helps park the vehicle using
the following steps:
1. The system searches for and measures
potential parking spaces.
2. The vehicle is steered while it is backing into
the parking space.
3. The vehicle's position in the space is
adjusted by driving forward/backward.
The
Park Out
function can be used to receive
assistance from PAP while pulling out of a park-
ing space. See the section “Leaving a parking
space with Park Assist Pilot”.
Perpendicular parking
Perpendicular parking overview.
The PAP function helps the vehicle using the fol-
lowing steps:
1. The system searches for and measures
potential parking spaces.
2. The vehicle is steered while it is backing into
the space and its position is adjusted by driv-
ing forward/backward.
The PAP function
Park Out
cannot help the
vehicle leave a perpendicular parking space –
the function should only be used for parallel
parking.
Related information
•
•
DRIVER SUPPORT
400
Parking with Park Assist Pilot
Park Assist Pilot (PAP
119
) helps the driver park
using three different steps. The function can also
help the driver pull out of a parking space.
The PAP function measures the space and
steers the vehicle – the driver's role is to:
•
keep close watch of the area around the
vehicle
•
follow the instructions on the center dis-
play
•
change gears (reverse/forward) – a
"ping" sound indicates when the driver
should change gears
•
regulate and maintain a safe speed
•
apply the brakes and stop.
Information about the actions required by the
driver are provided in the center display using
symbols, graphics and/or text.
PAP can be activated if the following criteria have
been met after the engine is started:
•
No trailer is hitched to the vehicle
•
Your vehicle's speed is lower than 30 km/h
(20 mph).
The distance between the vehicle and parking
spots should be 0.5-1.5 meters (1.6-5.0 ft)
when PAP is looking for parking.
Parking
PAP parks the vehicle using the following steps:
1. The system searches for and measures
potential parking spaces.
2. The vehicle is steered while it is backing into
the parking space.
3. The vehicle is positioned in the parking
space (the driver may be prompted to shift
gears).
Searching for and measuring potential
parking spots
The function can be activated
in the center display's Function
view.
It can also be accessed from
the camera views.
Parallel parking overview.
Perpendicular parking overview.
To do so:
119
Park Assist Pilot
DRIVER SUPPORT
}}
401
1. The vehicle's speed may not exceed
30 km/h (20 mph) when parallel parking or
20 km/h (12 mph) when perpendicular park-
ing.
2. Tap
Park In
in Function view or in Camera
view.
> PAP will search for a potential parking
space and measure it to determine if it is
big enough.
3. Be prepared to stop the vehicle when a
graphic and message in the center display
indicate that a suitable parking space has
been found.
> A pop-up window will appear.
4. Select
Parallel parking
or
Perpendicular
parking
and engage reverse gear.
PAP searches for space for parking, shows
instructions and guides the vehicle on its pas-
senger side. But, if so desired the vehicle can
be parked on the driver's side of the street:
•
Activate the turn signals on the driver's
side – the system will then search for
space to park on that side of the vehicle
instead.
Backing into a parking space
Parallel.
Perpendicular.
To back into a parking space:
1. Make sure the path behind your vehicle is
clear and engage reverse gear.
2. Back up slowly and carefully without touch-
ing the steering wheel and do not exceed a
speed of 7 km/h (4 mph).
3. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
•
Keep your hands away from the steering
wheel when the PAP function is acti-
vated.
•
Make sure that the steering wheel is not
hindered in any way and can rotate freely.
•
To achieve the best results – wait until
the steering wheel is finished turning
before beginning to drive forward/in
reverse.
||
DRIVER SUPPORT
* Option/accessory.
402
Positioning the vehicle in the parking space
Parallel.
Perpendicular.
To do so:
1. Move the gear selector to D, wait until the
steering wheel turns and then drive slowly
forward.
2. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
3. Engage reverse gear and back up slowly.
4. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
The function will switch off automatically and a
graphic and message will appear to indicate that
parking has been completed. Adjustments can
always be made be the driver afterward. Only the
driver can determine when the vehicle is correctly
parked.
The warning distance is shorter when the
sensors are used by PAP compared to when
they are used by the Parking Assist system.
Related information
•
Leaving a parking space with Park
Assist Pilot
The function
Park Out
can also help the driver
to leave a parking space.
Leaving a parking space with the
Park Out
function should only be used in connection
with parallel parking – it does not work for
perpendicular parking.
The
Park Out
function is acti-
vated in the center display's
Function view or in Camera
view.
To do so:
1. Tap
Park Out
in Function view or in Camera
view.
2. Move the gear selector to the suitable posi-
tion (e.g. D or R) for the direction in which
you will be pulling out of the parking space.
3. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display. Follow the instruc-
tions in the same way as for the parking pro-
cedure.
DRIVER SUPPORT
}}
* Option/accessory.
403
Note that the steering wheel can "spring" back
when the procedure is completed and the driver
may need to turn the steering wheel back to the
maximum position in order to pull out of the park-
ing space.
If PAP determines that the driver can pull out of
the parking space without any extra maneuvers,
the function will be deactivated, even if it seems
as though the vehicle is not completely out of the
parking space.
Related information
•
Park Assist Pilot* limitations
Park Assist Pilot PAP
120
may not be able to
detect all conditions in all situations and func-
tionality may therefore be limited.
WARNING
•
The PAP function is supplementary driver
support intended to facilitate driving and
help make it safer – it cannot handle all
situations in all traffic, weather and road
conditions.
•
Pay particular attention to people and
animals near the vehicle.
•
Bear in mind that the front end of the
vehicle may swing out towards oncoming
traffic during the parking maneuver.
•
Objects situated higher than the detec-
tion area of the sensors are not included
when the parking maneuver is calculated,
which could cause PAP to swing into the
parking space too early. Such parking
spaces should be avoided for this reason.
•
PAP is not a substitute for the driver's
attention and judgment. The driver is
always responsible for ensuring the vehi-
cle is driven in a safe manner, at the
appropriate speed, with an appropriate
distance to other vehicles, and in accord-
ance with current traffic rules and regula-
tions.
The driver should be aware of the following limi-
tations for Park Assist Pilot:
120
Park Assist Pilot
||
DRIVER SUPPORT
404
The parking sequence is cancelled
A parking sequence will be cancelled if:
•
the driver moves the steering wheel
•
the vehicle's speed exceeds 7 km/h (4 mph)
•
the driver taps
Cancel
in the center display
•
when the anti-lock brakes or the Electronic
stability control are engaged - e.g. when a
wheel loses grip on a slippery road
•
when the power steering works at reduced
power - e.g. during cooling due to overheat-
ing (see section "Speed-dependent steering
force").
A message in the center display will explain why
the parking sequence was cancelled.
Under certain circumstances, PAP may not be
able to find parking spaces – one reason may
be that the sensors are disrupted by external
sound sources that emit the same ultrasonic
frequencies that the system works with.
Examples of such sources include horns, wet
tires on asphalt, pneumatic brakes, exhaust
noise from motorcycles, etc.
Dirt, ice and snow covering the sensors
reduce their function and can make measure-
ment impossible.
Driver responsibility
The driver should keep in mind that PAP is a
parking aid
‒ not an infallible fully automatic sys-
tem. The driver must always be prepared to take
control and cancel a parking sequence if neces-
sary.
There are a number of things to keep in mind
when parking, including:
•
The driver is always responsible for determin-
ing if the space suggested by PAP is suita-
ble for parking.
•
Do not use PAP when using snow chains or
a temporary spare tire.
•
Do not use PAP if there are any objects pro-
truding from the vehicle.
•
Heavy rain or snowfall may inhibit PAP's abil-
ity to accurately measure a parking space.
•
While searching and measuring the parking
space, PAP may be unable to detect objects
located far into the space.
•
PAP may not suggest parking spaces on
narrow streets if it does not detect sufficient
space for maneuvering the vehicle.
•
Use approved tires
121
inflated to the correct
tire pressure because this affects PAP's abil-
ity to provide parking assistance.
•
PAP's function is based on the way the vehi-
cles are parked behind and in front of your
parking space. If they are, for example,
parked too close to the curb, there is a risk
that your vehicle's tires or wheel rims could
be damaged by the curb during the parking
procedure.
•
Perpendicular parking spaces may not be
detected or may be suggested unnecessarily
if a parked vehicle is sticking out more than
other parked vehicles.
•
PAP is intended to provide parking assis-
tance on straight streets, not sections of
street with sharp curves or bends. Always
make sure that your vehicle is parallel to rel-
evant parking spaces when PAP is measur-
ing the parking space.
Switching to another approved wheel and/or
tire dimension could change the tire circum-
ference, which would then require the PAP
system to be updated. Consult a workshop –
an authorized Volvo workshop is recom-
mended.
121
"Approved tires" refers to tires of the same type and make as the vehicle's original, factory-installed tires.
DRIVER SUPPORT
* Option/accessory.
405
Related information
•
•
Parking with Park Assist Pilot (p. 400)
•
Speed-dependent steering wheel resistance
(p. 270)
Recommended maintenance for
Park Assist Pilot
For Park Assist Pilot (PAP
122
) to function opti-
mally, its sensors must be cleaned regularly with
water and car washing detergent.
Location of the Park Assist sensors
123
.
Dirt, ice and snow covering the sensors could
cause false warnings, reduced function, or no
function.
Related information
•
122
Park Assist Pilot
123
Note: This illustration is general and details may vary depending on model.
DRIVER SUPPORT
* Option/accessory.
406
Park Assist Pilot* messages
Messages for Park Assist Pilot PAP
124
may be
displayed in the instrument panel and/or the
center display.
Some examples of symbols and messages are shown in the table below.
Message
Meaning
Park Assist System
Sensors blocked, cleaning needed
One or more of the sensors are blocked. Check and clean/remove the obstacle as soon as possible.
Park Assist System
Unavailable Service required
The system is not functioning as intended. Contact a workshop
‒ an authorized Volvo workshop is recommended.
A text message can be erased by briefly pressing
the
button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop
‒ an
authorized Volvo workshop is recommended.
Related information
•
124
Park Assist Pilot
HYBRID INFORMATION
HYBRID INFORMATION
408
General information about Twin
Engine
Twin Engine vehicles are driven just like any
other vehicle, but certain functions differ from a
vehicle powered exclusively by gasoline. The
electric motor powers the vehicle primarily at low
speeds; the gasoline engine is used at higher
speeds or during more active driving.
The instrument panel displays Twin Engine-spe-
cific information - charging information, selected
drive mode, distance to discharged battery and
hybrid battery charge level.
Different drive modes can be selected while driv-
ing, e.g. electric power only or, if more power is
needed, a combination of electric and gasoline
power. The vehicle calculates the optimal combi-
nation of driveability, driving experience, environ-
mental impact and fuel economy for the selected
drive mode.
In order to function optimally, the hybrid battery
(and its electrical drive systems) and the gasoline
engine (and its drive systems) must be at the
correct operating temperature. Battery capacity
can be considerably reduced if the battery is too
cold or too hot. Preconditioning prepares the
vehicle's drive systems and passenger compart-
ment before driving to help reduce both wear and
energy consumption. It also helps increase the
hybrid battery's range.
The hybrid battery which powers the electric
motor is recharged using the charging cable. It
can also be recharged during light braking and
through engine braking in gear position B. The
combustion engine can also help recharge the
hybrid battery.
Important
No electrical current
Keep in mind that if there is no electrical current
to the vehicle, i.e. the ignition is switched off or
the start battery is discharged, certain functions
such as brakes, power steering, etc. will not work.
WARNING
If the vehicle does not have electrical current
and both the electric motor and the gasoline
engine are switched off, the brakes cannot be
used to stop the vehicle.
Towing not permitted
Never tow a Twin Engine vehicle behind another
vehicle, as this could damage the electric motor.
Exterior engine noise
WARNING
Please be aware that there is no sound from
the engine when the vehicle is being powered
by the electric motor and it may be difficult to
detect by children, pedestrians, cyclists and
animals. This is especially true at low speeds.
High-voltage electrical current
WARNING
A number of electrical components in Twin
Engine Plug-in Hybrid vehicles use high-volt-
age current and can be extremely dangerous
if handled incorrectly. These components and
any orange wiring in the vehicle may only be
handled by trained and qualified Volvo service
technicians.
Do not touch anything that is not clearly descri-
bed in this Owner's Manual.
Related information
•
Charging the hybrid battery (p. 409)
•
•
•
Starting and stopping preconditioning
(p. 225)
•
•
HYBRID INFORMATION
}}
409
•
Gear selector positions for automatic trans-
missions (p. 440)
•
Towing using a towline (p. 468)
Charging the hybrid battery
In addition to the conventional fuel tank, your
vehicle is also equipped with a rechargeable
lithium-ion hybrid battery.
WARNING
California Proposition 65
Operating, servicing and maintaining a pas-
senger vehicle can expose you to chemicals
including engine exhaust, carbon monoxide,
phthalates, and lead, which are known to the
State of California to cause cancer and birth
defects or other reproductive harm. To mini-
mize exposure, avoid breathing exhaust, do
not idle the engine except as necessary, serv-
ice your vehicle in a well ventilated area and
wear gloves or wash your hands frequently
when servicing your vehicle. For more infor-
mation go to www.P65Warnings.ca.gov/
The hybrid battery can be recharged using the
charging cable stored in a storage space in the
trunk.
WARNING
The hybrid electrical system in your vehicle
uses high voltage electrical current. Any dam-
age to this system or to the hybrid battery
may result in the danger of overheating, fire,
or serious injury. If the vehicle is involved in a
collision or subjected to flooding, fire, etc.,
have it inspected by a trained and qualified
Volvo service technician. Prior to this inspec-
tion, the vehicle should be parked outdoors at
a safe distance from any building or poten-
tially flammable materials.
The hybrid battery's charging time depends on
the charging current used.
The capacity of the hybrid battery diminishes
somewhat with age and use, which could
result in increased use of the gasoline engine
and consequently, slightly higher fuel con-
sumption.
WARNING
If the hybrid battery needs to be replaced, this
may only be done by a Volvo retailer or
authorized Volvo workshop.
||
HYBRID INFORMATION
410
Charging cable handle and charging socket.
Charging status is indicated in three ways:
•
The indicator lights in the charging module
(the unit connected to the wall outlet).
•
Indicator light in the vehicle's charging
socket.
•
Images and text in the instrument panel.
The start battery is charged while the hybrid bat-
tery is charging and stops charging when the
hybrid battery is fully charged.
If the hybrid battery's temperature is below
-10
ºC (14 ºF) or above 40 ºC (104 ºF), some of
the vehicle's functions may be reduced or not
available at all.
The electric motor cannot be used if the battery's
temperature is too low or too high. If the PURE
drive mode is selected, the gasoline engine will
start.
Charging using the gasoline engine
The vehicle generates electrical current to charge the
battery, e.g. when the driver lightly presses the brake
pedal or when engine braking is used on downgrades.
The vehicle can also generate current to the
hybrid battery to charge it.
•
The hybrid battery can also be recharged by
lightly depressing the brake pedal, i.e. during
light braking. This converts the vehicle's
kinetic energy to electrical energy, which is
used to charge the hybrid battery.
•
In gear position B, the electric motor brakes
the vehicle when the accelerator pedal is
released and the hybrid battery is recharged
at the same time.
•
The combustion engine can also help
recharge the hybrid battery.
Related information
•
•
•
Opening and closing the charging socket
cover (p. 414)
•
Initiating hybrid battery charging (p. 415)
•
Stopping hybrid battery charging (p. 421)
•
Charging status in the charging cable's
charging module (p. 417)
•
Charging status in the vehicle's charging
socket (p. 417)
•
Charging status in the instrument panel
(p. 419)
•
Twin Engine symbols and messages in the
instrument panel (p. 422)
•
Gear selector positions for automatic trans-
missions (p. 440)
•
•
Long-term storage of vehicles with hybrid
batteries (p. 424)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст