Volvo XC90 T8 Twin Engine Plug-in Hybrid (2017 year). Manual — part 10
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
167
•
Moving the second row seats forward/rear-
ward (p. 176)
•
Adjusting the second row backrest tilt
(p. 177)
Manually operated front seats
The front seats can be adjusted in a number of
ways to help provide the most comfortable seat-
ing position.
Raise/lower the front edge of seat cushion
by pumping up/down
Move the seat forward/rearward by pulling
the bar upward and moving the seat.
Change lumbar support by pressing the but-
ton
*
Raise/lower the seat by moving the control
up/down
Change backrest tilt by turning the wheel
WARNING
•
Do not adjust the seat while driving. The
seat should be adjusted so that the brake
pedal can be depressed fully. In addition,
position the seat as far rearward as com-
fort and control allow.
•
Check that the seat is securely locked
into position after adjusting.
Related information
•
•
•
•
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
168
Power front seats
*
The power front seats offer a number of adjust-
ment possibilities to help maximize comfort and
ergonomics.
The power seats have an overload protector that
activates if a seat is blocked by any object. If this
occurs, put the ignition in mode I or 0 and wait
for a short period before operating the seat
again.
The power seat(s) can be adjusted for a short
period after unlocking the door with the remote
key without switching the ignition on. Seat adjust-
ment can always be made when the engine is
running.
Related information
•
•
•
Using the power seat memory function
•
Manually operated front seats (p. 167)
•
•
Turning front seat ventilation
•
Easy access to and from the driver seat
(p. 174)
Adjusting power front seats
*
The power front seat(s) can be adjusted to many
positions to help improve comfort and ergonom-
ics.
Adjust lumbar support by pressing the con-
trol up/down/forward/rearward
Raise/lower the front edge of the seat cush-
ion by moving the control up/down
Raise/lower the seat by moving the control
up/down
Move the seat forward/rearward by moving
the control forward/rearward
Change backrest tilt by moving the control
forward/rearward
Only one of the power seat's controls can be
used at the same time.
The front seat backrests can be folded down
completely.
Related information
•
•
Using the power seat memory function
•
•
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
169
Adjusting the passenger's seat from
the driver's seat
*
Using the controls on the side of the driver's
seat, the driver can adjust the position of the
front passenger's seat.
Activating the function in the center
display
From the center display, the function can be acti-
vated in two ways.
After activating the function, adjust the passeng-
er's seat within 10 seconds. If no adjustments
are made in that time span, the function deacti-
vates automatically.
Activating from Function view
1. Go to the center display's Function view.
2. Activate the function by tapping
Adjust
passenger seat
.
Activating from Settings
–
In the center display, select
Settings
My
Car
Seats
Adjust Passenger Seat
From Driver Position
.
Power seat controls
Move the passenger's seat forward/rearward
by moving the control forward/rearward.
Change the passenger seat's backrest tilt by
moving the control forward/rearward.
Related information
•
•
•
Using the power seat memory
function
*
The memory function can be used to store the
settings (positions) of the power front seats
*,
door mirrors and the head-up display
*.
Three different settings can be stored using this
function. Memory controls are found on one or
both of the front doors
*.
Button for storing a position
Button for storing a position
Button for storing a position
M (memory) button
Storing a position
1. Adjust the seat, door mirrors and head-up
display to the desired positions.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
170
2. Press and release the M button. The indica-
tor light in the button will illuminate.
3. Press button 1, 2 or 3 within 3 seconds to
store the current position of the seat/
mirrors/head-up display in the selected but-
ton.
> When the position has been stored in the
selected button, an audible signal will
sound and the indicator light in the M but-
ton will go out.
If none of the buttons (1, 2 or 3) are pressed
within 3 seconds, the indicator light in the M but-
ton will go out and the position will not be stored.
The seat/mirrors/head-up display must be
moved before new settings can be stored.
Using a stored position
A stored position can be used when one of the
front doors is opened or closed:
Front door open
–
Press one of the bottons (1–3) briefly. The
seat, door mirrors and head-up display will
move to the positions stored in that button.
Front door closed
–
Press and hold one of the buttons (1–3) until
the seat, door mirrors and head-up display
have moved to the positions stored in that
button.
The seat, door mirrors and head-up display will
stop automatically if the button is released before
the they have reached the stored positions.
WARNING
•
Because the driver's seat can be adjusted
with the ignition off, children should never
be left unattended in the vehicle.
•
Movement of the seat can be STOPPED
at any time by pressing any button on the
power seat control panel.
•
Do not adjust the seat while driving. The
seat should be adjusted so that the brake
pedal can be depressed fully. In addition,
position the seat as far rearward as com-
fort and control allow.
•
The seat rails on the floor must not be
obstructed in any way when the seat is in
motion.
Related information
•
•
Multifunctional front seats
*
In addition to the adjustment settings offered by
the power seat controls, the multifunction control
provides additional possibilities for convenience
and comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjust
lumbar support
*, the backrest's side bolsters*, the
length of the seat cushion and the massage
function
*. The adjustment settings made with the
control are shown in the center display
* and cer-
tain settings can be made directly from the cen-
ter display.
Center display
The adjustment settings for the driver and pas-
senger seats made using the multifunction con-
trol are shown in the center display. If only one
seat is adjusted, the settings are shown in the
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
171
center of the display. If both seats are adjusted,
the settings for the driver seat are shown on the
upper half of the screen and the ones made for
the passenger seat are on the lower half.
Press the Home button on the center console to
exit the seat adjustment setting view.
Related information
•
•
Adjusting function settings in the multifunc-
tional front seats
•
Adjusting function settings in the
multifunctional front seats
*
The multifunction controls on the side of the seat
as well as the center display can be used to
make seat adjustments. The adjustment settings
are shown in the center display
*.
Multifunction control on the side of the seat
Turn the control up or down to activate.
Front seat massage settings
*
The front seat backrests have a massage func-
tion. Air-filled cushions provide the massaging
action and a number of settings are available.
The massage function can only be used when
the engine is running.
Massage view in the center display
1. Activate the multifunction control by turning
it up or down. Seat settings will be displayed
in the center display.
2. Tap
Massage
in the seat settings view.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
172
3. Select massage settings by tapping the cen-
ter display or by moving the cursor up/down
using the multifunction control's upper/lower
buttons. Change a setting in the selected
function by tapping the arrows on the center
display or by using the multifunction control's
front/rear buttons.
Massage settings
The following massage settings are available:
•
On
/
Off
.
•
Program 1-5
: There are 5 preset massage
programs. Select
Swell
,
Tread
,
Advanced
,
Lumbar
or
Shoulder
.
•
Intensity
: Select
Low
,
Normal
or
High
.
•
Speed
: Select
Slow
,
Normal
or
Fast
.
Restarting the massage function
Massage restart button in the center display
The massage function switches off automatically
after 20 minutes and must be restarted manually
for continued use.
Tap
Restart
in the center display to restart the
selected massage program.
Adjusting the side bolsters in the front
seats
*
The side bolsters in the front seat backrests can
be inflated/deflated to adjust the amount of sup-
port provided.
Side bolster view in the center display
1. Activate the multifunction control on the side
of the seat by moving it up/down. The seat
settings view will appear in the center dis-
play.
2. Select
Side bolsters
in the seat settings
view.
•
Tap the front button to increase bolster
support.
•
Tap the rear button to decrease bolster
support.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
173
Adjusting front seat lumbar support
*
Lumbar support can be adjusted up/down/front/
rear.
Lumbar support view in the center display
1. Activate the multifunction control on the side
of the seat by moving it up/down. The seat
settings view will appear in the center dis-
play.
2. Select
Lumbar
in the seat settings view.
•
Tap the button up/down to move lumbar
support up/down.
•
Tap the front button to make lumbar sup-
port firmer.
•
Tap the rear button to make lumbar sup-
port softer.
Extending the seat cushion
The seat cushion can be extended/retracted
using the multifunction control.
Seat cushion extension view in the center display
1. Activate the multifunction control on the side
of the seat by moving it up/down. The seat
settings view will appear in the center dis-
play.
2. Select
Cushion extension
in the seat set-
tings view.
•
Tap the front button to extend the cush-
ion.
•
Tap the rear button to retract the cushion.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
174
Related information
•
Easy access to and from the driver
seat
The
Easy Ingress & Egress
function can be
used to make getting into and out of the driver's
seat easier.
Easy egress
To make getting out of the driver's seat easier,
the seat is lowered, the side bolster deflates and
the seat cushion retracts at the same time.
The easy egress function must be activated in
the center display.
–
Switch off the engine and open the driver's
door.
> The seat, side bolsters and seat cushion
all move at the same time to a position
that makes it easier to leave the seat.
Easy ingress
The seat remains in the easy egress position
when the driver leaves the vehicle. When the
driver returns to the vehicle, the seat is in a posi-
tion to make sitting down easier. When the driver
is seated, has buckled the seat belt and has put
the ignition in at least mode 1, the seat will return
to the driver's preferred position.
Activating/deactivating the function
1. In the center display, select
Settings
My
Car
Seats
.
2. Activate/deactivate the function by select-
ing/deselecting the
Easy Ingress & Egress
box.
Related information
•
•
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
175
Rear seats
Your vehicle has three rows of seats. The sec-
ond row of seats has three individual seating
positions and the third row of seats has two indi-
vidual seating positions.
Related information
•
Adjusting the second row backrest tilt
(p. 177)
•
Adjusting the second row head restraints
(p. 175)
•
Folding the second row backrests (p. 178)
•
Folding the third row backrests (p. 180)
•
Getting into and out of the third row of seats
(p. 179)
•
Moving the second row seats forward/rear-
ward (p. 176)
•
Adjusting the second row head
restraints
The center head restraint in the second row of
seats can be adjusted to suit the height of the
seat's occupant. The outboard head restraints
can be folded down
* for a better rear view.
Adjusting the center head restraint
The center head restraint should be adjusted up
or down according to the passenger's height. The
restraint should be carefully adjusted to support
the occupant's head.
The center rear seat head restraint should only
be in its lowest position when this seat is NOT
occupied. When the center seat is occupied, the
head restraint must be correctly adjusted to the
passenger’s height so that, if possible, the whole
of the back of the head is covered.
WARNING
The center rear seat head restraint should
only be in its lowest position when this seat is
NOT occupied. When the center seat is occu-
pied, the head restraint must be correctly
adjusted to the passenger’s height so that, if
possible, the entire back of the head is cov-
ered.
Center head restraint button
To lower the head restraint, press and hold the
button (see the illustration) and push the head
restraint down carefully.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
176
Electrically folding down the rear seat’s
outboard head restraints
*
The outboard head restraints can be folded down
in two ways from the center display.
From Function view
1. Go to the center display's Function view.
2. Tap the
Headrest fold
button.
Via settings
The ignition has to be in at least mode II.
1. In the center display's Top view, tap
Settings
.
2. Tap
My Car
Seats
3. Select
Fold Headrest On Second Row
Seats
to fold down the outboard head
restraints.
The head restraints must be returned to the
upright position manually until they click into
position.
WARNING
For safety reasons, the outboard head
restraints in the rear seats must be in the
upright (fixed) position if these seating posi-
tions are occupied or if the third row seats are
occupied.
The head restraint must be locked in the
upright position after it has been folded up.
Related information
•
Folding the second row backrests (p. 178)
•
Center display overview (p. 33)
Moving the second row seats
forward/rearward
The second row seats can be moved forward/
rearward individually to help optimize legroom for
the passengers.
Lift the handle located under the seat.
Move the seat forward/rearward to the
desired position.
3. Release the handle and move the seat so
that it locks in the new position.
WARNING
Be careful when moving the seat to avoid
injuries to your hands/fingers.
Check that the seat is securely locked in posi-
tion after being moved.
INSTRUMENTS AND CONTROLS
}}
177
Related information
•
•
Getting into and out of the third row of seats
(p. 179)
Adjusting the second row backrest
tilt
Backrest tilt can be adjusted separately for each
of the second row seats.
Center seat
1. Pull the strap on the center seat's right side.
2. Adjust backrest tilt forward/rearward by
decreasing/increasing pressure on it.
3. Release the strap to lock the backrest in the
new position and press the backrest until its
lock engages.
Outboard seats
1. Pull the handle on the side of the seat
upward.
2. Adjust backrest tilt forward/rearward by
decreasing/increasing pressure on it.
3. Release the handle to lock the backrest in
the new position and press the backrest until
its lock engages.
WARNING
Check that all backrests are securely locked
in place after changing the tilt angle.
Related information
•
•
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
178
•
Folding the second row backrests (p. 178)
•
Folding the second row backrests
The second row of seats has three individual
seating positions whose backrests can be
folded down separately.
•
To help avoid damage to the seat uphols-
tery, before a rear seat backrest is folded
down, remove any objects from the seat
and ensure that the seat belts are not
buckled.
•
The integrated booster cushion
* in the
center position must be stowed (folded
down) before the backrest is folded
down.
•
The center seating position armrest must
be folded up before the backrest is
folded down.
•
It may be necessary to adjust the front
seat backrests and/or move these seats
forward in order to fold down the rear
seat backrests completely.
•
It may also be necessary to move the
second row of seats rearward.
WARNING
Adjust the seat and be sure it is locked in the
new position before driving.
Center seat
To fold down the backrest:
1. Fold down the head restraint manually.
2. Pull the strap on the center seat's right side.
3. Fold the backrest down until it locks in posi-
tion. The seat cushion will move downward/
forward as the backrest is folded down to
create a flat surface.
To return the backrest to the upright position:
1. Pull the strap.
2. Fold the backrest and release the strap.
Push it into position until its lock engages.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
179
3. Adjust the head restraint if necessary.
Outboard seats
To fold down the backrest:
1. Pull up and hold the handle on the side of
the seat while the backrest is being folded
down.
2. Be sure that the backrest and head restraint
do not come in contact with the front seats
while they are being folded down. Fold down
until the backrest locks in place.
> The seat cushion will move downward/
forward as the backrest is folded down to
create a flat surface. The head restraint
folds down automatically when the back-
rest is folded down.
WARNING
After being folded down, be sure the back-
rests are securely locked in place.
To return the backrest to the upright position:
1. Pull up and hold the handle on the side of
the seat while the backrest is being folded
up.
2. Be sure that the backrest and head restraint
do not come in contact with the front seats
while they are being folded up. Fold up the
backrest and release the handle.
3. Press the backrest until its lock engages.
4. Fold up the head restraint manually.
WARNING
Be sure the backrest and head restraint are
securely locked in position after they have
been folded up.
Related information
•
•
Adjusting the second row backrest tilt
(p. 177)
•
Folding the third row backrests (p. 180)
•
Adjusting the second row head restraints
(p. 175)
Getting into and out of the third row
of seats
The second row seats can be moved for easier
access to the third row of seats
*.
Getting into and out of a third row seat
To fold down the backrest:
1. Pull the handle on the upper side of one of
the outboard second row seats upward/
forward.
2. Fold the backrest forward and move the
entire seat forward.
To return the backrest to the upright position:
–
Move the seat back and fold up the backrest
until it locks in position.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
180
WARNING
Be sure the backrest and head restraint are
securely locked in position after they have
been folded up.
Related information
•
Moving the second row seats forward/rear-
ward (p. 176)
•
Adjusting the second row backrest tilt
(p. 177)
•
Folding the second row backrests (p. 178)
Folding the third row backrests
The third row of seats has two individual seating
positions that can be folded down manually or
electrically
*.
Before folding down the third row seats, it
may be necessary to change the position/tilt
of the seats in the second row.
1. Pull the handle on the upper side of the
backrest upward/forward.
2. Be sure that the backrest and head restraint
do not come in contact with the seat ahead
while they are being folded down. Fold the
backrest down.
> The seat cushion will move downward/
forward as the backrest is folded down to
create a flat surface. The head restraint
folds down automatically when the back-
rest is folded down.
To return the backrest to the upright position,
fold the backrest up until it locks in position. The
head restraint has to be folded up manually.
WARNING
Be sure the backrest and head restraint are
securely locked in position after they have
been folded up.
Related information
•
•
Adjusting the second row head restraints
(p. 175)
•
Adjusting the second row backrest tilt
(p. 177)
•
INSTRUMENTS AND CONTROLS
}}
181
Driver profiles
Many of the vehicle's settings can be adapted to
the driver's personal preferences and saved in
one or more driver profiles.
The personal settings made are automatically
saved in the active driver profile. Each remote key
is linked to a driver profile and when this key is
used, the vehicle's settings are adapted accord-
ing to the specific ones saved in that profile.
Which settings are saved in driver
profiles?
The settings that can be changed in the vehicle
are either personal or global.
Changes made to personal settings are saved
automatically in the active (current) driver profile,
assuming that this profile is not locked. See the
article "Editing a driver profile" for additional
information.
Changes to global settings are not saved in a
specific driver profile but instead affect all driver
profiles.
Global settings
Global settings and parameters remain the same
regardless of which driver profile is currently
active.
Keyboard layout is an example of a global setting.
If driver profile X is used to add additional key-
board languages, these languages will also be
available even if driver profile Y is used. This type
of global change is not specific to a single driver
profile.
Personal settings
If driver profile X has been used to e.g., set the
brightness for the center display, driver profile Y
will not be affected by this setting since it is spe-
cific (personal) to driver profile X.
See also the article "Categories in Settings view"
for an overview of global and personal settings.
Related information
•
Editing a driver profile (p. 182)
•
Categories in Settings view (p. 116)
Selecting a driver profile
The most recently selected driver profile will be
used automatically the next time the vehicle is
started. However, a different driver profile can be
selected after the vehicle has started.
When the vehicle is started, the most recently
selected driver profile will be shown at the top of
the center display. There are two alternatives for
changing to another driver profile.
Alternative1:
1. Tap the name of the drive profile shown at
the top of the center display when the vehi-
cle has been started.
> A list of driver profiles that can be
selected will be displayed.
2. Select the desired profile.
3. Tap
Confirm
.
> The new driver profile has now been
selected and the system will load the set-
tings stored in that profile.
Alternative 2:
1. Pull down the center display's Top view.
2. Tap
Profile
.
> A list of driver profiles that can be
selected will be displayed.
3. Select the desired profile.
||
INSTRUMENTS AND CONTROLS
182
4. Tap
Confirm
.
> The new driver profile has now been
selected and the system will load the set-
tings stored in that profile.
Related information
•
•
Editing a driver profile (p. 182)
•
Linking a remote key to a driver profile
(p. 183)
Editing a driver profile
The driver profiles can be edited to e.g., change
their names or lock a profile.
All types of changes in driver profiles are made
from the center display's Top view:
Settings
System
Driver Profile
.
Changing a profile's name
Changing a driver profile's name is done from the
Driver Profile
window:
1. Tap
Edit Profile
.
> A menu will open in which the profile can
be edited.
2. Tap the
Profile Name
box.
> A keyboard will be displayed and can be
used to change the name. Tap
to
close the keyboard.
3. Save the changes by tapping
Back
/
Close
.
> The name has now been changed.
Locking/unlocking a driver profile
In some cases, it may be desirable to not save
certain settings in the active driver profile. For
this reason, the profile can be locked. To lock/
unlock a profile from the
Driver Profile
window:
1. Tap
Edit Profile
.
> A menu will open in which the profile can
be edited.
2. Tap
Protect My Profile
to lock/unlock the
profile.
3. Save the change by tapping
Back
/
Close
.
> When a profile is locked, settings that are
changed in the vehicle will not be saved
automatically in the profile and will have to
saved manually by tapping
Save
changes
. However, when the profile is
unlocked, the changes will be saved auto-
matically.
Resetting driver profile changes
Settings that have been changed and saved in
one or more driver profiles can be reset.
Global Reset
is only possible when the vehi-
cle is stationary.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст