Volvo V90 (2019 year). Manual — part 9
LIGHTING
}}
* Option/accessory.
159
Active high beam
Active high beams is a function that uses cam-
era sensors in the upper edge of the windshield
to detect the headlights of approaching vehicles
or the taillights of the vehicle directly ahead.
When either of these is detected, the vehicle's
headlights will automatically switch from high
beams to low beams.
Active high beam is enabled by moving the lighting ring
on the steering wheel lever to
.
The function can also detect street lighting.
When the camera sensor no longer detects an
approaching vehicle or a vehicle ahead, the head-
lights will return to high beams.
This function can be used in dark conditions
when the vehicle's speed is approx. 20 km/h
(approx. 12 mph) or higher.
If active high beams are deactivated when the
high beams are on, the headlights will automati-
cally switch to low beams.
When active high beams are activated, a white
symbol will be displayed in the instrument
panel.
When high beams are on, the symbol will be blue.
For LED headlights, this applies even if the high
beams are partially dimmed, i.e. if the headlights
are illuminated with slightly more than low beams.
Vehicles with halogen headlights
When the camera sensor no longer detects the
headlights of approaching vehicles or the tail-
lights of a vehicle ahead, the headlights will
return to high beams after a second or so.
Vehicles with LED
3
headlights*
If the active high beams are equipped with the
auto on/off function
4
, the headlights will return to
high beams a second or so after the camera sen-
sor no longer detects the headlights of approach-
ing vehicles or the taillights of a vehicle ahead.
Limitations for active high beams
The camera sensor on which the function is
based has limitations.
If this symbol and the message
Active
High Beam
Temporarily
unavailable
is displayed in the instru-
ment panel, switching between high
and low beams must be done manually. The light-
ing ring on the steering wheel lever can remain in
the
position. The
symbol will go out
when the message is displayed.
The same applies if this symbol along
with the message
Windscreen
sensor
Sensor blocked, see
Owner's manual
is displayed.
Active high beams may be temporarily unavailable
in certain situations, e.g. heavy fog or rain. When
active high beams become available again, or the
windshield sensors are no longer blocked, the
message will disappear and the
symbol will
be displayed.
WARNING
Automatic high beam is an aid in using the
best possible light based on prevailing condi-
tions.
The driver is always responsible for manually
switching between high and low beam when
traffic situations or weather conditions require
this.
3
LED (Light Emitting Diode)
4
Depends on the vehicle's equipment level.
||
LIGHTING
160
Related information
•
Lighting panel and controls (p. 154)
•
•
Using turn signals
The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn sig-
nals flash three times or continuously, depend-
ing on how far up or down the lever is moved.
Turn signals.
Triple flash indicator
Move the steering wheel lever up or down to
the first position and release. The turn sig-
nals will flash three times. If the function is
deactivated via the center display, the signals
will flash once.
•
This automatic flashing sequence can be
interrupted by immediately moving the
lever in the opposite direction.
•
If the turn signal indicator flashes more
quickly than normal, refer to the message
in the instrument panel.
Continuous flashing sequence
Move the lever up or down as far as possible.
The lever will stop in its end position and can be
moved back manually or automatically by moving
the steering wheel.
Related information
•
Hazard warning flashers (p. 163)
•
Adjusting light functions via the center dis-
play (p. 155)
•
LIGHTING
}}
* Option/accessory.
161
Active Bending Lights*
Active Bending Lights (ABL) are designed to
help provide maximum illumination in curves and
intersections. Depending on equipment level,
vehicles with LED
5
headlights* may be equipped
with Active Bending Lights.
Headlight pattern with function deactivated (left) and
activated (right).
Active Bending Lights follow the movement of
the steering wheel to help provide maximum illu-
mination in curves and intersections, helping to
improve visibility for the driver.
The function is automatically activated when the
engine is started. If a fault is detected in the sys-
tem, the
symbol will illuminate in the
instrument panel and a message will be dis-
played.
The function is only active in weak daylight or
dark conditions and only when the vehicle is mov-
ing and the low beams are on.
Deactivating/activating the function
The function is activated as the default factory
setting and can be activated and deactivated in
the center display's Function view:
Tap the
Active Bending
Lights
button.
Related information
•
Adjusting light functions via the center dis-
play (p. 155)
•
Front fog lights/cornering illumination*
(p. 161)
Front fog lights/cornering
illumination*
The front fog lights have a stronger beam than
low beam, making them particularly effective in
fog.
Front fog lights button.
The front fog lights can be turned on when the
ignition is in mode II and the lighting ring is in
position
,
or
.
Tap the button to activate or deactivate the func-
tion. The
symbol in the instrument panel
comes on when the front fog lights are on.
The front fog lights turn off automatically when
the ignition is switched off or when the lighting
ring is in position
.
5
LED (Light Emitting Diode)
||
LIGHTING
* Option/accessory.
162
Regulations concerning fog light use vary
from country to country.
Cornering illumination*
The front fog lamps can include the cornering
lights function, which temporarily illuminates the
area diagonally in front of the car in the direction
the steering wheel is turned on a sharp bend, or
in the direction shown by the direction indicators.
The function is activated in weak daylight or dark
conditions when the lighting ring is in
or
mode and the vehicle speed is less than
about 30 km/h (about 20 mph).
Both cornering illumination are also illuminated
as a complement to the taillights when reversing.
The function is activated as the default factory
setting and can be activated and deactivated
using the center display.
Related information
•
Lighting panel and controls (p. 154)
•
•
•
Active Bending Lights* (p. 161)
•
Adjusting light functions via the center dis-
play (p. 155)
Rear fog light
The rear fog light is considerably brighter than
ordinary taillights and should only be used to
help other road users see the vehicle when visi-
bility is reduced by conditions such as fog,
snow, smoke or dust.
Rear fog light button.
The rear fog light consists of a light on the rear
of the vehicle on the driver's side.
The rear fog light can only be used when:
•
ignition mode II is active and the lighting ring
is in position
or
•
the lighting ring is in the
position and
the front fog lights are on.
Press the button for On/Off. The
symbol in
the instrument panel illuminates when the rear
fog light is on.
The rear fog light turns off automatically when:
•
the ignition is off or the lighting ring is in the
position.
•
the lighting ring is in the
position and
the front fog lights are turned off.
Regulations concerning rear fog light use vary
from country to country.
Related information
•
Lighting panel and controls (p. 154)
•
Front fog lights/cornering illumination*
(p. 161)
•
•
LIGHTING
163
Brake lights
The brake lights are automatically illuminated
when braking.
The brake lights illuminate when the brake pedal
is depressed. They also illuminate when the
brakes are automatically applied by one of the
driver support systems.
Related information
•
Emergency brake lights (p. 163)
•
Emergency brake lights
The emergency brake lights are activated to
warn following vehicles of hard braking.
This function causes an additional taillight on
each side of the vehicle to illuminate.
The emergency brake lights are activated in the
event of hard braking or if the ABS system is
activated and the vehicle is traveling at a high
speed.
After the driver decelerates to a low speed and
then releases the brake, the brake lights resume
their normal brightness.
Related information
•
•
•
Hazard warning flashers (p. 163)
Hazard warning flashers
Hazard warning flashers warn other road users
by all of the vehicle's turn signals being activated
at the same time. The function can be used to
warn about a traffic hazard.
Hazard warning flashers button.
Press the button to activate the hazard warning
flashers.
Regulations concerning the use of hazard
warning flashers may vary from country to
country.
Related information
•
Emergency brake lights (p. 163)
•
LIGHTING
* Option/accessory.
164
Using home safe lighting
Some of the exterior lights remain on to illumi-
nate the area around the vehicle. This is called
home safe lighting.
To activate home safe lighting:
1. Switch off the ignition.
2. Push the left-side steering wheel lever
toward the dashboard and release.
3. Exit the vehicle and lock the doors.
When the function is activated, a symbol will be
shown in the instrument panel and the parking
lights, outer door handle lights* and the license
plate lights will be illuminated.
The length of time home safe lighting remains
illuminated can be set in the center display.
Related information
•
Adjusting light functions via the center dis-
play (p. 155)
•
Welcome Light
Approach lighting is activated when the vehicle
is unlocked and can be used to provide light as
you walk toward the vehicle.
The function is activated when the remote key is
used for unlocking. The parking lights, outer door
handle lights*, license plate lights, interior ceiling
lights, footwell lighting and trunk/cargo compart-
ment lighting will be illuminated. If a door is
opened while the function is activated, the light-
ing in the outer door handle* and the interior
lighting will remain illuminated for a longer period
of time.
This function can be activated and deactivated in
the center display.
Related information
•
Adjusting light functions via the center dis-
play (p. 155)
•
Using home safe lighting (p. 164)
•
Interior Lighting
The interior is equipped with several different
types of lighting to improve the experience. This
includes reading lamps, glove box lighting and
ground lighting.
All lighting in the passenger compartment can be
turned on and off manually within 5 minutes
after:
•
the engine has been switched off and the
ignition is in mode 0.
•
the vehicle is unlocked but the engine has
not been started.
Front ceiling lighting
The controls in the ceiling console for the front reading
lights and courtesy lighting.
Reading light left side
Passenger compartment lighting
LIGHTING
}}
* Option/accessory.
165
Courtesy lighting auto switch
Reading light right side
Reading lights
The reading lights on the right and left sides are
switched on and off by briefly pressing the but-
tons in the ceiling console. To adjust the bright-
ness, press and hold the button.
Passenger compartment lighting
Briefly press the button in the ceiling console to
switch on or off the footwell lighting and ceiling
lighting.
Courtesy lighting auto switch
Activate the auto switch by briefly pressing the
AUTO button in the ceiling console. With Auto
activated, the indicator light in the button and the
courtesy lighting come on and are turned off as
follows.
The courtesy lighting:
•
comes on when the vehicle is unlocked and
when the ignition is switched off
•
goes off when the engine is started and
when the vehicle is locked
•
comes on or goes off when a side door is
opened or closed
•
remains on for 2 minutes if any of the side
doors are open.
Rear roof lighting
Reading lights are located in the rear section of
the vehicle and can also be used as passenger
compartment lighting.
Reading lights over the rear seat.
In vehicles with panoramic roofs*, there are two lamp
units, one on each side of the ceiling.
Briefly press the button on the light to turn on or
off the reading lights. To adjust the brightness,
press and hold the button.
Glove compartment lighting
The glove compartment lighting comes on or
goes off when the glove compartment is opened
or closed.
Vanity mirror lighting*
The vanity mirror lighting comes on or goes off
when the cover over the mirror is opened or
closed.
Ground lighting*
The ground lighting comes on or goes off when a
door is opened or closed.
Doorsill lighting
The doorsill lighting comes on or goes off when a
door is opened or closed.
Cargo compartment lighting
The cargo compartment lighting comes on or
goes off when the cargo compartment is opened
or closed.
Ambient Lighting
The ambient lighting comes on when the doors
are opened and goes out when the vehicle is
locked. Ambient lighting brightness can be
adjusted in the center display and also fine-tuned
using the thumb wheel in the dashboard.
||
LIGHTING
* Option/accessory.
166
Mood lighting*
The vehicle is equipped with LEDs that provide
faint lighting in various colors. This lighting is on
when the engine is running. Mood lighting can be
adjusted in the center display and also fine-tuned
using the thumb wheel in the dashboard.
Lighting in the door storage
compartments
Lighting in the door storage compartments
comes on when the doors are opened and goes
out when the vehicle is locked. The brightness
can be adjusted using the thumb wheel in the
dashboard.
Lighting in the tunnel console's front
cup holder
The lighting in front console cup holders
switches on when the vehicle is unlocked and off
when the vehicle is locked. The brightness can
be adjusted using the thumb wheel in the dash-
board.
Related information
•
Adjusting interior lighting (p. 166)
•
Lighting panel and controls (p. 154)
•
•
Passenger compartment interior (p. 562)
Adjusting interior lighting
Illumination in the vehicle varies depending on
ignition mode. The interior lighting can be
adjusted with a thumb wheel in the dashboard
and certain light functions can also be adjusted
via the center display.
The thumb wheel on the dash-
board to the left of the steering
wheel can be used to adjust
the brightness of the display
lighting, instrument lights,
ambient lighting and mood
lighting*.
Adjust ambient decor lighting
1. Tap
Settings
in the Top view in the center
display.
2. Tap
My Car
Lights and Lighting
Interior Lighting
.
3. Choose from among the following settings:
•
Under
Ambient Light Intensity
, select
Off
,
Low
or
High
.
•
Under
Ambient Light Level
, select
Reduced
or
Full
.
Adjusting mood lighting*
The vehicle is equipped with several LEDs that
provide faint lighting in various colors. This light-
ing is on when the engine is running.
Changing the brightness
1. Tap
Settings
in the Top view in the center
display.
2. Tap
My Car
Lights and Lighting
Interior Lighting
Interior Mood Lighting
.
3. Under
Interior Mood Light Intensity
, select
Off
,
Low
or
High
.
Changing the color of the light
1. Tap
Settings
in the Top view in the center
display.
2. Tap
My Car
Lights and Lighting
Interior Lighting
Interior Mood Lighting
.
3. Choose
By Temperature
or
By Color
to
change the color of the light.
If
By Temperature
is selected, the light will
change according to the temperature set for
the passenger compartment.
If
By Color
is selected, the subcategory
Theme Colors
can be used to make further
adjustments.
Related information
•
•
Adjusting light functions via the center dis-
play (p. 155)
•
WINDOWS, GLASS AND MIRRORS
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
168
Windows, glass and mirrors
The vehicle is equipped with controls for win-
dows, glass and mirrors. Some of the windows
in the car are laminated.
Laminated glass
The windshield has laminated glass. Laminated
glass is also available as on option for some
other glass surfaces. Laminated glass is rein-
forced, which provides better protection against
break-ins and improved soundproofing in the
passenger compartment.
The panoramic roof* also has laminated glass.
The symbol shows the windows containing laminated
glass
1
Related information
•
Pinch protection for windows and sun cur-
tains (p. 168)
•
•
•
Rearview/door mirrors (p. 171)
•
•
•
Using the windshield wipers (p. 178)
•
Using the windshield and headlight washers
(p. 181)
•
Activating and deactivating the heated wind-
shield* (p. 223)
•
Activating and deactivating the heated rear
window and door mirrors (p. 224)
Pinch protection for windows and
sun curtains
All power windows and sun curtains* have a
pinch protection function that is triggered if any-
thing blocks them while they are opening or
closing.
If pinch protection is activated, movement will
stop and then retract automatically to approx.
50 mm (2 inches) from the point at which it was
blocked (or to full ventilation position).
It is still possible to override pinch protection
when closing is interrupted (e.g. due to ice) by
pressing and holding down the control in the
same direction.
If there is any problem with the pinch protection,
a rest procedure can be tested.
WARNING
If the starter battery is disconnected, the func-
tion for automatic opening and closing must
be reset to function correctly. A reset is
required in order for the pinch protection to
work.
Related information
•
Reset procedure for pinch protection
(p. 169)
•
Operating the power windows (p. 170)
1
Does not apply to windshield and panoramic roof*, which are always laminated and therefore do not have this symbol.
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
169
•
•
Reset procedure for pinch
protection
If you experience any problems with the electri-
cal functions for the power windows, you can try
to perform a reset.
WARNING
If the starter battery is disconnected, the func-
tion for automatic opening and closing must
be reset to function correctly. A reset is
required in order for the pinch protection to
work.
If the problem persists or if it affects the panor-
amic roof or sunroof, contact a workshop
2
.
Resetting a power window
1. Start with the window in the closed position.
2. Then operate the window in manual mode
three times upward toward the closed posi-
tion.
> The system will be automatically initiated.
Related information
•
Pinch protection for windows and sun cur-
tains (p. 168)
•
Operating the power windows (p. 170)
•
Power windows
The power windows are operated using the con-
trol panels found in the doors. The driver's door
has controls for operating all windows and for
activating the child safety locks.
Driver's door control panel.
Electric child safety locks* that deactivate the
controls in the rear doors to prevent the
doors or windows from being opened from
the inside.
Rear window controls.
Front window controls.
The power windows have pinch protection. If
there is any problem with the pinch protection, a
rest procedure can be tested.
2
An authorized Volvo workshop is recommended.
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
170
WARNING
Children, other passengers or objects can be
trapped by the moving parts.
•
Always operate the windows with caution.
•
Do not allow children to play with the
operating controls.
•
Never leave a child alone in the vehicle.
•
Remember to always cut the current to
the power windows by setting the vehi-
cle's electrical system to ignition mode 0
and then taking the remote key with you
when leaving the vehicle.
•
Never stick objects or body parts out
through the windows, even if the vehicle
electrical system is completely turned off.
Related information
•
Operating the power windows (p. 170)
•
Pinch protection for windows and sun cur-
tains (p. 168)
•
Reset procedure for pinch protection
(p. 169)
Operating the power windows
All power windows can be operated using the
control panel in the driver's door. The control
panels in the other doors can be used to oper-
ate that particular door.
The power windows have pinch protection. If
there is any problem with the pinch protection, a
rest procedure can be tested.
WARNING
Children, other passengers or objects can be
trapped by the moving parts.
•
Always operate the windows with caution.
•
Do not allow children to play with the
operating controls.
•
Never leave a child alone in the vehicle.
•
Remember to always cut the current to
the power windows by setting the vehi-
cle's electrical system to ignition mode 0
and then taking the remote key with you
when leaving the vehicle.
•
Never stick objects or body parts out
through the windows, even if the vehicle
electrical system is completely turned off.
Operating the power windows.
Operating manually. Move one of the controls
slightly up or down. The power windows go
up or down while the control is held in posi-
tion.
Operating with automatic controls. Move one
of the controls up or down to its end position
and release it. The window moves automati-
cally to its fully closed/open position.
To use the power windows, the ignition must be
in at least mode I or II. After the ignition has
been switched off, the power windows can be
operated for several minutes or until a door is
opened. Only one control panel can be operated
at a time.
It can also be operated using keyless opening*
with the door handle.
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
171
WARNING
Make sure that no child or other passenger
comes into contact with the windows as they
are closing with keyless closing*.
One way to reduce the pulsating wind noise
heard when the rear windows are open is to
also open the front windows slightly.
The windows cannot be opened at speeds
over approx. 180 km/h (ca112 mph), but they
can be closed.
The driver is always responsible for following
applicable traffic regulations.
Related information
•
•
Pinch protection for windows and sun cur-
tains (p. 168)
•
Reset procedure for pinch protection
(p. 169)
•
Keyless locking and unlocking* (p. 255)
•
Locking and unlocking using the remote key
(p. 242)
Using sun curtains*
There are integrated sun curtains in each rear
door.
Rear door – manually operated
The illustration is generic – the design may vary.
Hook with locking mechanism
–
Pull up the sun curtain and hook it to the
upper section of the door frame.
The window can be opened and closed when the
sun curtain is being used.
Related information
•
Pinch protection for windows and sun cur-
tains (p. 168)
•
Reset procedure for pinch protection
(p. 169)
•
Rearview/door mirrors
The rearview mirror and door mirrors can be
used to improve the driver's visibility behind the
vehicle.
Rearview mirror
The rearview mirror can be easily adjusted man-
ually. The rearview mirror can be equipped with
HomeLink*, auto-dim* and compass*.
Door mirrors
WARNING
The door mirror on the passenger side is
curved to improve visibility. Objects in the mir-
ror may appear farther away than they actually
are.
The joystick in the drivers' door control panel is
used to adjust the position of the door mirrors.
There are also several automatic settings that
can also be connected to the memory function
buttons for the power seat*.
Related information
•
•
•
Adjusting the rearview mirror dimming func-
tion (p. 172)
•
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
172
•
Storing positions for seats, mirrors and head-
up display* (p. 188)
•
Activating and deactivating the heated rear
window and door mirrors (p. 224)
Adjusting the rearview mirror
dimming function
Bright light entering the vehicle from behind, e.g.
from the headlights of following vehicles, could
reflect in the rearview mirror and door mirrors
and cause a glare. Use the dimming function
when light from behind is distracting.
Auto-dim
If bright light enters the vehicle from behind, the
door mirrors will automatically dim. Auto-dim is
always active when the engine is running, except
when reverse gear is engaged.
Adjustments to the sensitivity level will not be
noticeable immediately but will instead take
effect after a short period of time.
The sensitivity level for dimming will affect both
the rearview mirror and door mirrors.
To change the dimming sensitivity level:
1. Tap
Settings
in the Top view in the center
display.
2. Tap
My Car
Mirrors and Convenience
.
3. Under
Rearview Mirror Auto Dimming
,
select
Normal
,
Dark
or
Light
.
The rearview mirror instead has two sensors -
one pointing forward and one pointing rearward -
which work together to identify and eliminate
glare. The forward-pointing sensor monitors
ambient light, while the rearward-pointing sensor
monitors light from the headlights of following
vehicles.
For the door mirrors to be equipped with auto-
dim, the rearview mirror must also be equipped
with auto-dim.
If the sensors are obstructed by e.g. a parking
permit, transponder, sunshade or objects on
the seats or in the cargo compartment in a
way that prevents light from reaching the sen-
sors, the auto-dim function in the door and
rearview mirrors will be reduced.
Related information
•
Rearview/door mirrors (p. 171)
•
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
173
Adjusting the door mirrors
To improve visibility to the rear, the door mirrors
need to be adjusted to the driver's height and
seating position. There are several automatic
settings that can also be connected to the mem-
ory function buttons for the power seat*.
Controls used for door mirrors
Door mirror controls.
The joystick in the drivers' door control panel is
used to adjust the position of the door mirrors.
The ignition must be in at least mode I.
1. Press the L button for the left door mirror or
R for the right door mirror. The button will
light up.
2. Adjust the position using the joystick located
between the buttons.
3. Press the L or R button again. The light in
the button will go out.
Automatically folding door mirrors*
The door mirrors can be automatically folded
when driving or parking in tight spaces.
1. Press the L and R buttons at the same time.
2. Release the buttons after about 1 second.
The mirrors will automatically stop when they
are completely folded in.
Open the mirrors by pressing L and R at the
same time. The mirrors will automatically stop
when they are completely open.
Resetting the mirrors' position
A mirror that has been moved out of position
manually (e.g. hit or bumped into) must be electri-
cally returned to its normal position for automatic
folding* to function properly.
1. Fold in the mirrors by pressing the L and R
buttons at the same time.
2. Open them again by pressing the L and R
buttons at the same time.
3. Repeat the above procedure as needed.
The mirrors are now reset to their original posi-
tions.
Tilting when parking
3
The door mirrors can be tilted down to help give
the driver a better view along the sides of the
vehicle, e.g. of the curb when parking.
–
Select reverse gear and press the L or R mir-
ror button.
Please note that the button may need to be
pressed twice depending on settings. When the
door mirror is tilted down, the light in the button
will flash. When reverse gear is engaged, the
door mirrors will automatically start to move after
3 seconds and will reach their original position
after about 8 seconds.
Automatically tilting when parking
3
With this setting, the door mirrors will automati-
cally tilt down when reverse gear is engaged. The
folded position is preset and cannot be adjusted.
To immediately return the door mirrors to their
original position, press the L or R button twice.
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Mirrors and Convenience
.
3. Under
Exterior Mirror Tilt at Reverse
,
select
Off
,
Driver
,
Passenger
or
Both
to
activate/deactivate and to select which mir-
ror to tilt.
3
Only on models equipped with a power driver's seat with memory buttons*.
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
174
Automatic folding when the vehicle is
locked*
The door mirrors can automatically fold in when
the vehicle is locked and open when the vehicle
is unlocked using the remote key.
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
Mirrors and Convenience
.
3. Select
Fold Mirror When Locked
to acti-
vate/deactivate.
Related information
•
Rearview/door mirrors (p. 171)
•
Adjusting the rearview mirror dimming func-
tion (p. 172)
•
Storing positions for seats, mirrors and head-
up display* (p. 188)
•
Activating and deactivating the heated rear
window and door mirrors (p. 224)
Panoramic roof*
The panoramic roof is divided into two glass
sections. The front section can be opened verti-
cally at the rear edge (ventilation position) or hor-
izontally (open position). The rear section cannot
be moved.
The panoramic roof has a wind deflector and
sun curtain made of perforated fabric (located
beneath the glass sections) for extra protection
in e.g. bright sunlight.
The panoramic roof and sun curtain are operated
using the controls in the ceiling.
It can also be operated using keyless opening*
with the door handle.
To operate the panoramic roof and sun curtain,
the ignition must be in mode I or II.
WARNING
Children, other passengers or objects can be
trapped by the moving parts.
•
Always operate the windows with caution.
•
Do not allow children to play with the
operating controls.
•
Never leave a child alone in the vehicle.
•
Remember to always cut the current to
the power windows by setting the vehi-
cle's electrical system to ignition mode 0
and then taking the remote key with you
when leaving the vehicle.
•
Never stick objects or body parts out
through the windows, even if the vehicle
electrical system is completely turned off.
•
Do not open the panoramic roof when
load carriers are installed.
•
Never place heavy objects on the panor-
amic roof.
•
Remove ice and snow before opening the
panoramic roof. Be careful not to scratch
any surfaces or damage the trim.
•
Do not operate the panoramic roof if it is
frozen in place.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст