Volvo V60 Cross Country (2018 year). Manual — part 4
SAFETY
62
•
•
Integrated booster cushion – using
The Integrated booster cushion (p. 60) in the
rear seat can be folded up in two stages,
depending on the child's height and weight.
Stage 1
Pull the handle (1) forward and upward (2) to
release the booster cushion.
Press the booster cushion rearward to lock it
in position.
Stage 2
SAFETY
63
With the booster cushion in the stage 1 posi-
tion, press the button (see the arrow in illus-
tration 1).
Lift the front edge of the booster cushion
and press it rearward toward the backrest to
lock it in position.
WARNING
DEATH or SERIOUS INJURY can
occur
• Follow all instructions on this
child restraint and in the vehicle’s
owner’s manual.
• Make sure the booster cushion is
securely locked before the child
is seated.
•
Use this booster cushion only with chil-
dren whose height and weight are within
the permitted limits shown in the table.
•
Use only the vehicle’s lap and shoulder
belt system when restraining the child in
this booster seat.
•
In the event of a collision while the inte-
grated booster cushion was occupied, the
entire booster cushion and seat belt must
be replaced. The booster cushion should
also be replaced if it is badly worn or
damaged in any way. This work should be
performed by a trained and qualified
Volvo service technician only.
The table showing the permitted heights and
weights can be found in the article "Integrated
booster cushion – general information."
Related information
•
Integrated booster cushion – stowing
(p. 64)
•
SAFETY
64
Integrated booster cushion –
stowing
The integrated booster cushion (p. 60) can be
folded down completely (stowed) from either the
stage 1 or stage 2 positions.
The booster cushion cannot be moved from
the stage 2 (upper) position to the stage 1
(lower) position. It must first be folded down
completely to the stowed position, and then
adjusted to stage 1.
Pull the handle forward to release the
booster cushion.
Press down on the center of the booster
cushion to return it to the stowed position.
The booster cushion must be in the stowed
position before the rear seat backrests are
folded down.
Be sure there are no loose objects under the
booster cushion before it is stowed.
WARNING
DEATH or SERIOUS INJURY can
occur
• Follow all instructions on this
child restraint and in the vehicle’s
owner’s manual.
• Make sure the booster cushion is
securely locked before the child
is seated.
•
Use this booster cushion only with chil-
dren whose height and weight are within
the permitted limits shown in the table.
•
Use only the vehicle’s lap and shoulder
belt system when restraining the child in
this booster seat.
•
In the event of a collision while the inte-
grated booster cushion was occupied, the
entire booster cushion and seat belt must
be replaced. The booster cushion should
also be replaced if it is badly worn or
damaged in any way. This work should be
performed by a trained and qualified
Volvo service technician only.
The table showing the permitted heights and
weights can be found in the article "Integrated
booster cushion – general information."
SAFETY
}}
* Option/accessory.
65
Related information
•
Integrated booster cushion – using (p. 62)
•
Integrated booster cushion – general infor-
mation (p. 60)
Child safety locks
Power child safety locks
* help prevent children
from inadvertently opening one of the rear doors
or windows from inside the vehicle.
Manual child safety locks
Child safety locks – rear doors
The controls are located on the rear door jambs.
Use the remote control's key blade or a screw-
driver to adjust these controls.
The rear doors can only be opened from the
outside when the slot is in the horizontal
position.
The rear doors can be opened from the
inside when the slot is in the vertical position.
Power child safety locks and
disengaging rear door windows
*
Driver's door control panel
The power child safety locks can be activated/
deactivated when the remote key is in
mode I (p. 82) or higher. Activation/deactivation
can be done up to 2 minutes after the engine
has been switched off (if no door has been
opened).
To activate the child safety locks:
1. Put the ignition in mode I or higher, or start
the engine.
2. Press the button on the driver's door control
panel (see the illustration).
>
Rear child locks Activated
will be dis-
played in the instrument panel and the
indicator light in the button will illuminate
when the function is activated.
||
SAFETY
66
When the child safety locks are activated:
•
The rear door windows can only be opened
from the driver's door control panel
•
The rear doors cannot be opened from the
inside
The child safety locks' current setting is stored
when the engine is switched off. If these locks
were activated when the engine was switched off,
they will also be active when the engine is restar-
ted.
Related information
•
Detachable key blade – general information
(p. 157)
•
INSTRUMENTS AND CONTROLS
INSTRUMENTS AND CONTROLS
68
Instrument overview
This overview shows the location of the instru-
ment panel and center console displays, and
controls/buttons/switches.
INSTRUMENTS AND CONTROLS
}}
69
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
70
Function
See
Controls for menus and
messages, turn signals,
high/low beams, trip
computer
(p. 79),
(p. 99),
(p. 92),
(p. 118)
Paddles for manually
shifting gears
*
Cruise control
Horn, airbag
Main instrument panel
Infotainment system/
Bluetooth hands-free
controls
Sensus Info-
tainment sup-
plement
START/STOP ENGINE
button
Ignition slot
Display for infotainment
system functions and
menus
(p. 116), Sen-
sus Infotain-
ment supple-
ment
Door handle
-
Function
See
In-door control panels
(power windows, mir-
rors, central locking but-
ton)
Hazard warning flashers
Controls for the info-
tainment system and
menus
(p. 79),
(p. 132), Sen-
sus Infotain-
ment supple-
ment
Climate system controls
Gear selector
Not in use
-
Wipers and washers
Steering wheel adjust-
ment
Hood opening control
Parking brake
Function
See
Power seat
* adjustment
controls
Lighting panel, buttons
for opening fuel filler
door and unlocking the
tailgate
Related information
•
Information displays – ambient temperature
sensor (p. 80)
•
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
71
Information displays – introduction
The displays show information on some of the
vehicle's functions, such as cruise control, the
trip computer and messages. The information is
shown with text and symbols.
Information displays: analog instrument panel
Information displays: digital instrument panel
*
More detailed information can be found in the
descriptions of the functions that use the infor-
mation displays.
Gauges and indicators: analog
instrument panel
Fuel gauge: When the indicator shows one
white marking
1
, a yellow indicator light will
illuminate to indicate a low fuel level. See
also Trip computer – introduction (p. 118)
and Refueling – fuel requirements (p. 286)
for additional information.
Eco meter: Indicates how economically the
vehicle is being driven. The higher the needle
moves on the scale, the more economically
the vehicle is being driven.
Speedometer
Tachometer: Shows engine speed in thou-
sands of revolutions per minute (rpm)
Gear indicator: Shows the currently selected
gear
1
When the message
Distance to empty fuel tank:
shows "
----
", the marker turns red
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
72
Gauges and indicators: digital
instrument panel
*
Different themes (display alternatives) can be
selected for the digital instrument panel:
•
Elegance
•
Eco
•
Performance
To change themes, press the OK button on the
left steering wheel lever and use the thumb
wheel to scroll to
Themes
. Press OK to confirm
your choice.
Theme Elegance: gauges and indicators
Fuel gauge. When the indicator shows one
white marking, a yellow indicator light will illu-
minate to indicate a low fuel level. See also
Trip computer – introduction (p. 118) and
Refueling – fuel requirements (p. 286) for
additional information.
Coolant temperature gauge
Speedometer
Tachometer (engine speed in thousands of
revolutions per minute (rpm))
Gear indicator: Shows the currently selected
gear
Theme Eco: gauges and indicators
Fuel gauge. When the indicator shows a
white marking, a yellow indicator light will illu-
minate to indicate a low fuel level. See also
Trip computer – introduction (p. 118) and
Refueling – fuel requirements (p. 286) for
additional information.
Speedometer
Tachometer (engine speed in thousands of
revolutions per minute (rpm))
Gear indicator: Shows the currently selected
gear
Theme Performance: gauges and indicators
Fuel gauge. When the indicator shows a
white marking, a yellow indicator light will illu-
minate to indicate a low fuel level. See also
Trip computer – introduction (p. 118) and
Refueling – fuel requirements (p. 286) for
additional information.
Coolant temperature gauge
Speedometer
Tachometer (shows engine speed in thou-
sands of revolutions per minute (rpm))
INSTRUMENTS AND CONTROLS
* Option/accessory.
73
Gear indicator: Shows the currently selected
gear
Indicator and warning symbols
Indicator and warning symbols: analog instrument panel
Indicator symbols
Indicator and warning symbols
Warning symbols
Indicator and warning symbols: digital instrument panel
Indicator symbols
Indicator and warning symbols
Warning symbols
Function check
All indicator and warning symbols light up in igni-
tion mode II or when the engine is started. When
the engine has started, all the symbols should go
out except the parking brake symbol, which only
goes out when the brake is disengaged.
If the engine does not start or if the function
check is carried out in ignition mode II, all sym-
bols go out after 5 seconds except the malfunc-
tion indicator light, which may indicate a fault in
the vehicle's emissions system, and the symbol
for low oil pressure.
Some of the symbols shown may not be available
in all markets or models.
Related information
•
•
Information displays – indicator symbols
(p. 75)
•
INSTRUMENTS AND CONTROLS
* Option/accessory.
74
Eco Guide* and Power Meter*
Eco guide and Power guide are two gauges in
the instrument panel that help improve driving
economy.
The vehicle also stores driving-related statistics
in the form of a bar graph, see Trip computer –
Trip statistics (p. 126).
Introduction
To display or remove these functions from the
instrument panel, select the "Eco" theme (see
Information displays – introduction (p. 71)).
Driving statistics are also stored and can be dis-
played in the form of a bar chart (see Trip com-
puter – Trip statistics (p. 126)).
Eco Guide
This gauge gives an indication of how economi-
cally the vehicle is being driven.
Current (instantaneous) reading
Average
Current (instantaneous) reading
This is the current level of economical driving; the
higher the reading, the more economically the
vehicle is being driven.
This value is calculated based on the vehicle's
speed, engine speed (rpm), engine load and
brake use.
The optimal speed range is between approxi-
mately 30–50 mph (50–80 km/h), preferably at
as low rpm as possible. The markers fall when
the brake or accelerator pedal is pressed.
If the current reading is very low, the red field in
the gauge will illuminate after a slight delay, indi-
cating low driving economy.
Average
The average reading changes gradually accord-
ing to changes in the current reading to indicate
how economically the vehicle has been driven
recently. The higher the average reading, the
more economically the vehicle has been driven.
Power Meter
This gauge indicates the engine power that has
been utilized and the amount of power remaining.
Available power
Utilized power
Available power
The smaller, upper indicator shows the engine's
available power
2
. The higher the reading on the
scale, the greater the amount of power remaining
in the current gear.
2
Depending on rpm
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
75
Utilized power
The larger, lower indicator shows the amount of
engine power that has been utilized
2
. The higher
the reading on the scale, the greater the amount
of power that is being utilized.
The larger the gap between the two indicators,
the greater the amount of power remaining.
Information displays – indicator
symbols
The indicator symbols alert the driver when cer-
tain functions are activated, that a system is
actively working or that a fault may have occur-
red in a system or function.
Symbol
Description
Fault in the Active Bending Light
(ABL)
*system
Malfunction indicator light
Anti-lock brake system (ABS)
Rear fog lights on
Stability system
The stability system's Sport mode is
activated
Low fuel level
Information symbol, read the text
displayed in the instrument panel
High beam indicator
Symbol
Description
Left turn signal indicator
Right turn signal indicator
Tire pressure monitoring sensor
(TPMS)
A
The Eco function is on.
TheStart/Stop function is active
(the engine has auto-stopped)
A
Option in Canada
Fault in the Active Bending Light (ABL)
system
This symbol will illuminate if there is a fault in the
ABL system. See Active Bending Lights (ABL)
(p. 95) for more information about this system.
2
Depending on rpm
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
76
Malfunction Indicator Light
As you drive, a computer called On-Board Diag-
nostics II (OBDII) monitors your vehicle's engine,
transmission, electrical and emission systems.
The malfunction indicator light will illuminate if
the computer senses a condition that potentially
may need correcting. When this happens, please
have your vehicle checked by a trained and quali-
fied Volvo service technician as soon as possible.
A malfunction indicator light may have many cau-
ses. Sometimes, you may not notice a change in
your car's behavior. Even so, an uncorrected con-
dition could hurt fuel economy, emission controls,
and drivability. Extended driving without correct-
ing the cause could even damage other compo-
nents in your vehicle.
This light may illuminate if the fuel filler cap is not
closed tightly or if the engine was running while
the vehicle was refueled.
Anti-lock Brake System (ABS)
If the warning light comes on, there may be a
malfunction in the ABS system (the standard
braking system will still function). Check the sys-
tem by:
1. Stopping in a safe place and switching off
the ignition.
2. Restart the engine.
3. If the warning light goes off, no further action
is required.
If the indicator light remains on, the vehicle
should be driven to a trained and qualified Volvo
service technician for inspection, see Brakes –
general (p. 277) for additional information.
Rear fog lights
This symbol indicates that the rear fog lights are
on.
Stability system
This indicator symbol flashes when the stability
system is actively working to stabilize the vehicle,
see Stability system – introduction (p. 174) for
more detailed information.
Stability system - Sport mode
This symbol illuminates to indicate that the stabil-
ity system's Sport mode has been activated to
help provide maximum tractive force, for example
when driving with snow chains, or driving in deep
snow or loose sand.
Low fuel level
When this light comes on, the vehicle should be
refueled as soon as possible. See Refueling –
fuel requirements (p. 286) for information about
fuel and refueling.
Information symbol
The information symbol lights up and a text mes-
sage is displayed to provide the driver with nec-
essary information about one of the vehicle's sys-
tems. The message can be erased and the sym-
bol can be turned off by pressing the OK button
(see Information display – menu controls
(p. 116) for information) or this will take place
automatically after a short time (the length of
time varies, depending on the function affected).
The information symbol may also illuminate
together with other symbols.
High beam indicator
This symbol illuminates when the high beam
headlights are on, or if the high beam flash func-
tion is used.
Left turn signal indicator
Right turn signal indicator
•
Both turn signal indicators will flash when
the hazard warning flashers are used.
•
If either of these indicators flash faster
than normal, the direction indicators are
not functioning properly.
Tire pressure monitoring system (TPMS)*
This symbol illuminates to indicate that tire pres-
sure in one or more tires is low, see Tire Pressure
Monitoring System (TPMS) – general information
(p. 320) for detailed information.
Eco* function on
The symbol will illuminate when the Eco function
is activated.
Start/stop*
The symbol illuminates when the engine has
auto-stopped.
INSTRUMENTS AND CONTROLS
}}
77
Related information
•
Information displays – introduction (p. 71)
•
Information displays – warning symbols
(p. 77)
Information displays – warning
symbols
The warning lights alert the driver that an impor-
tant function is activated or that a serious fault
has occurred.
Symbol
Description
Low oil pressure
A
Parking brake applied
B
SRS airbags
Seat belt reminder
Generator not charging
Fault in the brake system
Warning symbol, read the text dis-
played in the instrument panel
A
Certain engines do not use this symbol to indicate low oil pres-
sure. On these models, a text message will be displayed on the
instrument panel instead, see Engine compartment – engine oil
B
The symbol is Park only on models with the optional digital
instrument panel.
Low oil pressure
If the light comes on while driving, stop the vehi-
cle, stop the engine immediately, and check the
engine oil level. Add oil if necessary. If the oil
level is normal and the light stays on after restart,
have the vehicle towed to the nearest trained and
qualified Volvo service technician.
Parking brake applied
This symbol flashes while the brake is being
applied and then glows steadily when the parking
brake has been set.
See Parking brake – general information (p. 280)
for more information about using the parking
brake.
Airbags – SRS
If this light comes on while the vehicle is being
driven, or remains on for longer than approxi-
mately 10 seconds after the vehicle has been
started, the SRS system's diagnostic functions
have detected a fault in a seat belt lock or pre-
tensioner, a front airbag, side impact airbag,
and/or an inflatable curtain. Have the system(s)
inspected by a trained and qualified Volvo service
technician as soon as possible.
See Supplemental Restraint System (SRS)
(p. 33) for more information about the airbag sys-
tem.
Seat belt reminder
This symbol comes on for approximately 6 sec-
onds if the driver has not fastened his or her seat
belt.
Generator not charging
This symbol comes on during driving if a fault has
occurred in the electrical system. Contact an
authorized Volvo workshop.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст