Honda Odyssey (2019 year). Manual — part 7
96
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
*
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if there is a problem
with the LKAS.
• Stays on constantly - Have your
vehicle checked by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(Green)
*
• Comes on when you press the
MAIN button.
2 Lane Keeping Assist System (LKAS)
P. 583
—
• Comes on when the LKAS is in
operation, or the LKAS button is
pressed, but the temperature
inside the front sensor camera is
too high. The LKAS cancels
automatically. The beeper sounds
simultaneously.
• Use the climate control system to cool
down the camera.
• Goes off - The camera has cooled down
and the system is working normally.
P. 564
• Comes on when the area around
the camera is blocked by dirt,
mud, etc. Stop your vehicle in a
safe place, and wipe it off with a
soft cloth.
• May come on when driving in bad
weather (rain, snow, fog, etc.)
• Have your vehicle checked by a dealer if
the indicator and message come back on
after you cleaned the area around the
camera.
* Not available on all models
97
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Road Departure
Mitigation
(RDM) Indicator
*
• Comes on for a few seconds when
you change the power mode to
ON, then goes off.
• Comes on if there is a problem
with the RDM system.
• Stays on constantly - Have your
vehicle checked by a dealer.
• Comes on when the RDM system
shuts itself off.
• Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
P. 564
• Stays on - The area around the camera
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator and message come back on
after you cleaned the area around the
camera.
P. 564
* Not available on all models
98
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive Cruise
Control (ACC)
Indicator
(Amber)
*
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if there is a problem
with ACC.
• Comes on while driving - Have your
vehicle checked by a dealer.
• Comes on if anything covers the
radar sensor cover and prevents
the sensor from detecting a
vehicle in front.
• May come on when driving in bad
weather (rain, snow, fog, etc.)
• ACC has been automatically
canceled.
• When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
• Have your vehicle checked by a dealer if
the indicator does not go off even after
you clean the sensor cover.
Adaptive Cruise
Control (ACC)
Indicator
(Green)
*
• Comes on when you press the
MAIN button.
2 Adaptive Cruise Control (ACC)
P. 566
—
• Comes on when ACC is in
operation, but the temperature
inside the front sensor camera is
too high. ACC cancels
automatically. The beeper sounds
simultaneously.
• Use the climate control system to cool
down the camera.
• Goes off - The camera has been cooled
down. Pressing the MAIN button can
resume the system.
P. 564
2 Adaptive Cruise Control (ACC)
P. 566
* Not available on all models
99
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive Cruise
Control (ACC)
Indicator
(Green)
*
• Comes on when the area around
the camera is blocked by dirt,
mud, etc. Stop your vehicle in a
safe place, and wipe it off with a
soft cloth.
• May come on when driving in bad
weather (rain, snow, fog, etc.)
• Have your vehicle checked by a dealer if
the indicator and message come back on
after you cleaned the area around the
camera.
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
*
• Comes on for a few seconds when
you change the power mode to
ON, then goes off.
• Comes on when you deactivate
the CMBS
TM
. A driver information
interface message appears for five
seconds.
• Comes on if there is a problem
with the CMBS
TM
.
• Stays on constantly without the
CMBS
TM
off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking
P. 610
* Not available on all models
100
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
*
• Comes on when the CMBS
TM
system shuts itself off.
• Stays on - The area around the camera
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
P. 564
• When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
• Have your vehicle checked by a dealer if
the indicator does not go off even after
you clean the sensor cover.
2 Collision Mitigation Braking
P. 610
• Stays on - The temperature inside the
camera is too high. Use the climate
control system to cool down the camera.
The system activates when the
temperature inside the camera cools
down.
P. 564
* Not available on all models
101
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Blind spot
information
System Indicator
• Stays on while the blind spot
information system is turned off.
—
• Comes on when mud, snow, or ice
accumulates in the vicinity of
sensor.
• Comes on while driving - Remove the
obstacle in the vicinity of the sensor.
2 Blind spot information System
P. 598
• Comes on if there is a problem
with the system.
• Comes on while driving - Have your
vehicle checked by a dealer.
Models with Blind spot information System
* Not available on all models
102
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the
(home) button, select Warnings, then press the
ENTER button to see the message again with the system message indicator on.
Message
Condition
Explanation
• Appears if any door or the tailgate is not completely
closed.
• Goes off when all doors and the tailgate are closed.
• Appears when the hood is opened.
• Close the hood.
• Appears when the engine oil pressure is low.
• Appears while driving - Immediately stop in a safe
place.
2 If the Low Oil Pressure Symbol Appears P. 718
• Appears if there is a problem with the shutter grille,
and the radiator coolant temperature is too high.
• Power output will be reduced, so you may not be able
to accelerate or maintain your current speed. Have your
vehicle checked by a dealer.
103
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the washer fluid is low.
• Refill the washer fluid.
2 Refilling Window Washer Fluid P. 659
• Appears while you are customizing the settings and
the transmission is in other than
(
P.
2 Vehicle Customization P. 133
• Appears when the temperature of the transmission
is starting to get too hot.
• The performance of the vehicle may be reduced.
• Until the message disappears, reduce your speed and
allow the system to cool down.
• Appears if the battery charge becomes low.
• Charge the battery.
• Appears when the fuel fill door is opened.
• Close the fuel fill door.
Canadian models
Models with color audio system
104
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when there is a problem with the sensor on
the battery.
• Have your vehicle checked by a dealer.
• Appears along with the charging system indicator
when the battery is not charging.
• Turn off the climate control system and rear defogger
to reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 718
• Appears when the scheduled maintenance is due
soon.
• Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2 Maintenance Minder Messages on the Driver
• Appears if there is a problem with the power sliding
door system.
• Turn off the main switch and manually operate the
power sliding doors.
• Have your vehicle checked by a dealer.
2 Opening/Closing the Power Sliding Doors
P. 172
U.S.
Canada
Models with power sliding doors
* Not available on all models
105
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the engine coolant temperature gets
abnormally high.
• Appears when there is a problem with the power
tailgate system.
• Manually open or close the power tailgate.
• Have your vehicle checked by a dealer.
• Appears when the starter system has a problem.
• As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal and manually start the engine.
• Have your vehicle checked by a dealer.
U.S.
Canada
Models with power tailgate
U.S.
Canada
106
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you set the power mode to
ACCESSORY or ON.
2 Starting the Engine P. 538
• Appears when the engine does not restart
automatically due to the following reason:
• The hood is open.
• There is a problem in the system that disables Auto
Idle Stop.
• Follow the normal procedure to start the engine.
2 Starting the Engine P. 538
• Close the hood.
• Appears when the steering wheel is locked.
• Move the steering wheel left and right while pressing
the ENGINE START/STOP button.
• Appears when the power mode is in ACCESSORY.
—
• Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
• Press the ENGINE START/STOP button twice with your
foot off the brake pedal to change the power mode to
VEHICLE OFF.
Models with Auto Idle Stop
Canadian models
107
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you close the door with the power
mode in ON without the remote inside the vehicle.
• Disappears when you bring the remote back inside the
vehicle and close the door.
2 Remote Reminder P. 188
• Appears when the remote battery becomes weak.
• Replace the battery as soon as possible.
2 Replacing the Button Battery P. 686
• Appears if the remote battery is too weak to start the
engine or the key is not within operating range to
start the engine.
A beeper sounds six times.
• Bring the remote in front of the ENGINE START/STOP
button to be touched with.
2 If the Remote Battery is Weak P. 711
• Appears if you press the ENGINE START/STOP
button while the vehicle is moving.
• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
• Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
• Press and hold the ENGINE START/STOP button with
your foot off the brake pedal to change the power
mode to VEHICLE OFF.
• Appears when you attempt to change to another
gear position with the transmission in
(
P and the
engine OFF.
• To select another gear position while in
(
P, the engine
must be ON.
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the engine. If the message disappears,
continue driving.
ELITE and TOURING grade models
108
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the vehicle is stopped with the
driver’s seat belt unfastened and there is a chance
that the vehicle may roll unintentionally.
• Press the
(
P button before release the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 548
• Appears when the engine stops without the
transmission in
(
P, and does not restart
automatically.
• Appears if you open the hood while Auto Idle Stop
activates.
• If you want to set the power mode to ON, change the
gear position to
(
P.
• If you want to start the engine, follow the normal
procedure.
2 Starting the Engine P. 538
• Appears when you change to
(
N, then release the
(
N button.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 550
• Appears when car wash mode is not available due to
hot transmission.
• When transmission is too hot, car wash mode may not
be available. Let the engine idle and cool down
transmission.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 550
• Appears when you try to change the gear position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
Models with Auto Idle Stop
ELITE and TOURING grade models
109
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Appears when the
(
P button is pressed while the
vehicle is moving.
• Appears if you change the gear position to
(
R while
the vehicle is moving forward, or to
(
D while the
vehicle is reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Appears when you set the power mode to ON
without fastening the driver’s seat belt.
• Appears when you change the gear position after
(
P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 548
• Appears when you press the
(
P button but it is not
engaged due to low ATF temperature.
• Depress the brake pedal until this message disappear.
• Appears when depressing the accelerator pedal
while the gear position is in
(
N.
• Remove your foot from the accelerator pedal. When
driving, depress the brake pedal and change the gear
position.
Except ELITE and TOURING grade models
110
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you press and hold
(
N button for
more than two seconds.
• Disappears when you set the gear position to other
than
(
N.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 550
• Appears if there is a problem with the cooling
system.
• Drive slowly to prevent overheating and have your
vehicle checked by a dealer as soon as possible.
• Appears if there is a problem with the automatic
lighting control system.
• Appears while driving - Manually turn the lights on,
and have your vehicle checked by a dealer.
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
• Appears if there is a problem with the parking sensor
system.
• Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on or the
beeper does not stop even after you clean the area,
have the system checked by a dealer.
• Appears if there are obstacles around the sensors.
• Check for obstacles near your vehicle to make sure it is
safe to park.
Models with LED headlights
Models with LED headlights
Models with parking sensor system
Models with parking sensor system
111
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the automatic brake hold is automatically
canceled while it is in operation.
• Immediately depress the brake pedal.
• Appears when the automatic brake hold system is
turned off.
• Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
• Fasten the driver’s seat belt.
• Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
• Press the automatic brake hold button with the brake
pedal depressed.
• Appears when the parking brake is applied
automatically while it is in operation.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст