Honda Civic Hatchback (2018 year). Manual — part 9
uu
Gauges and Displays
u
Driver Information Interface
*
128
In
strum
e
nt Pa
nel
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Use the driver information interface’s customized features to correct the
temperature.
2 Customized Features P. 133
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
When the turbo charger is producing boost,
this meter shows the boost pressure.
■
Outside Temperature
■
Instant Fuel Economy
■
Turbo Meter
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
1.5 L engine models
2.0 L engine models
Continued
129
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
Shows you turn-by-turn driving directions to your destination linked with the
navigation system.
2 Refer to the Navigation System Manual
Shows the current audio information.
2 Audio System Basic Operation P. 237, 255
Shows the current mail information.
P. 407
Shows the current phone information.
P. 381, 407
■
Turn-by-Turn Directions
*
■
Audio
*
■
*
■
Phone
*
1
You can select whether the turn-by-turn display
comes on or not during the route guidance.
2 Customized Features P. 133, 348
* Not available on all models
130
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
Displays the strength (G) and direction of the load that is applied to the vehicle
during driving.
Displays the brake pressure in PSI when the brake is applied.
Displays the accelerator position in degrees of %.
Light up from left to right according to engine
speed.
■
G-Meter
*
■
Braking Pressure Meter
*
■
Accelerator Position Meter
*
■
Rev Indicators
*
Rev Indicators
* Not available on all models
Continued
131
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
Measures the lap time, and displays the previously measured times, split time and
the fastest lap time.
■
Measuring LAP Time
1. Press the ENTER button to display the lap
time measurement screen.
2. Press the ENTER button to start
measurement.
3. Press the ENTER button again to stop
measurement.
u
To measure the time per lap, press the
/
button at the completion of each
lap.
u
To return to the Stopwatch screen,
press the
(Hang-up/back)
button.
■
Stopwatch
*
1
Be sure to use this measurement function only where
and when it is safe to do so.
Lap time is displayed from 00:00.00 to 9:59:59.99.
Button
3
ENTER Button
Button
Button
(Hang-up/Back)
Button
Button
4
3 4
* Not available on all models
132
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
■
Checking/Clearing history
• To check history, press the
button (when
lap time is not running) to change the
display, then press the
/
button to
scroll through lap times.
u
A maximum of 20 lap times can be
stored at a time.
• To clear the history, press and hold the
/
button when lap time is not running.
• To return to the lap time measurement
screen, press the
button.
• To return to the Stopwatch screen, press
the
(Hang-up/back) button.
Press
Button
Press
Button
3 4
3
4
Continued
133
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
Use the driver information interface to customize certain features.
■
How to customize
Select the Vehicle Settings screen by pressing the
button while the ignition
switch is in ON
(
w
*1
, and the vehicle is at a complete stop, and the shift lever is in
(
P (continuously variable transmission), and the parking brake is set (manual
transmission). Select Vehicle Settings, then press the ENTER button.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Customized Features
Models with color audio system
1
To customize other features, press the
/
button.
2 List of customizable options P. 137
2 Example of customization settings P. 142
When you customize settings:
Shift to
(
P.
Set the parking brake.
3
4
Models with continuously variable transmission
Models with manual transmission
ENTER Button
Press to set your selection.
Button
Press to go to Vehicle Menu.
Button
Press to scroll upwards.
3
Button
Press to scroll downwards.
4
Driver information interface:
Goes to Vehicle Settings.
134
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
■
Customization flow
Press the
button.
ENTER
Vehicle Settings
“Trip A” Reset Timing
Language Selection
Adjust Outside Temp. Display
3
4
TPMS Calibration
*
ENTER
“Trip B” Reset Timing
Fuel Efficiency Backlight
*
3
4
ACC Forward Vehicle Detect Beep
*
3
4
Tachometer
ENTER
Forward Collision Warning Distance
*
3
4
3
4
Lane Keeping Assist Suspend Beep
*
Road Departure Mitigation Setting
*
Adjust Alarm Volume
Speed/Distance Units
3
4
ENTER
Driver Assist System Setup
Meter Setup
Rev Match System
*
Shift Up Backlight
*
Gear Position Display
*
* Not available on all models
135
uu
Gauges and Displays
u
Driver Information Interface
*
Continued
In
strum
e
nt Pa
nel
ENTER
Keyless Access Light Flash
Keyless Access Beep
3
4
Door Unlock Mode
Keyless Access Setup
*
3
4
Remote Start System ON/OFF
*
* Not available on all models
136
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
Exit
3
4
3
4
3
4
Maintenance Reset
Default All
3
4
ENTER
3
4
3
4
Key And Remote Unlock Mode
Auto Door Lock
Auto Door Unlock
Keyless Lock Answer Back
Security Relock Timer
Interior Light Dimming Time
Headlight Auto OFF Timer
Auto Light Sensitivity
3
4
3
4
Auto Headlight ON With Wiper ON
ENTER
ENTER
Auto Interior Illumination Sensitivity
Lighting Setup
Door Setup
Walk Away Auto Lock
*
* Not available on all models
137
uu
Gauges and Displays
u
Driver Information Interface
*
Continued
In
strum
e
nt Pa
nel
■
List of customizable options
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
TPMS
Calibration
*
—
Calibrates the TPMS.
Cancel/Calibrate
Driver Assist
System
Setup
Forward Collision
Warning Distance
Changes the distance at which CMBS
TM
alerts.
Long/Normal
*1
/Short
ACC Forward Vehicle
Detect Beep
Causes the system to beep when the system detects a
vehicle, or when the vehicle goes out of ACC range.
ON/OFF
*1
Road Departure
Mitigation Setting
Changes the setting for the road departure
mitigation system.
Normal
*1
/Wide/Warning
Only
Lane Keeping Assist
Suspend Beep
Causes the system to beep when the LKAS is
suspended.
ON/OFF
*1
Rev Match System
*
Turns the Rev Match System feature on and off.
ON
*1
/OFF
* Not available on all models
138
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Meter Setup
Language Selection
Changes the displayed language.
English
*1
/Français/Español
Adjust Outside Temp.
Display
Adjusts the temperature reading by a few degrees.
-5°F ~ ±0°F
*1
~ +5°F
Gear Position Display
*
Turns the gear position display feature on and off.
ON
*1
/OFF
“Trip A” Reset Timing
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and
elapsed time A.
When Refueled/IGN OFF/
Manually Reset
*1
“Trip B” Reset Timing
Changes the setting of how to reset trip meter B,
average fuel economy B, average speed B, and
elapsed time B.
When Refueled/IGN OFF/
Manually Reset
*1
Adjust Alarm Volume
Changes the alarm volume, such as buzzers,
warnings, turn signal sound, and so on.
High/Mid
*1
/Low
Shift Up Backlight
*
Turns the shift up backlight blink feature on and off.
ON
*1
/OFF
Fuel Efficiency Backlight
*
Turns the ambient meter feature on and off.
ON
*1
/OFF
Speed/Distance Units
Selects the trip computer units.
mph∙miles
*1
/km/h∙km
Tachometer
Selects whether the tachometer is displayed on the
driver information interface.
ON
*1
/OFF
* Not available on all models
139
uu
Gauges and Displays
u
Driver Information Interface
*
Continued
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Keyless
Access
Setup
*
Keyless Access Beep
Causes the beeper to sound when you unlock/lock
the doors.
ON
*1
/OFF
Keyless Access Light
Flash
Causes some exterior lights to flash when you
unlock/lock the doors.
ON
*1
/OFF
Door Unlock Mode
Changes which doors unlock when you grab the
driver’s door handle.
Driver Door Only
*1
/All Door
Remote Start System
ON/OFF
*
Turns the remote engine start feature on and off.
ON
*1
/OFF
Lighting
Setup
Interior Light Dimming
Time
Changes the length of time the interior lights stay on
after you close the doors.
60sec/30sec
*1
/15sec
Headlight Auto OFF
Timer
Changes the length of time the exterior lights stay
on after you close the driver’s door.
60sec/30sec/15sec
*1
/0sec
Auto Light Sensitivity
Changes the timing for the headlights to come on.
Max/High/Mid
*1
/Low/Min
Auto Interior
Illumination Sensitivity
Changes the sensitivity of the brightness of the
instrument panel when the headlight switch is in the
AUTO position.
Max/High/Mid
*1
/Low/Min
Auto Headlight ON With
Wiper ON
Changes the settings for the wiper operation when
the headlights automatically come on while the
headlight switch is in the AUTO position.
ON
*1
/OFF
* Not available on all models
140
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Door Setup
Auto Door Lock
Changes the setting for when the doors
automatically lock.
With Vehicle Speed
*1
/Shift
from P/OFF
With Vehicle Speed
*1
/OFF
Auto Door Unlock
Changes the setting for when the doors
automatically unlock.
When Driver’s Door Opens
*1
/
When Shifting Into Park/
When Ignition Switched
OFF/OFF
When Driver’s Door Opens
*1
/
When Ignition Switched
OFF/OFF
Key And Remote Unlock
Mode
Sets up either the driver’s door or all doors to unlock
on the first operation of the remote or ignition key.
Driver Door
*1
/ All Doors
Continuously variable
transmission models
Manual transmission models
Continuously variable
transmission models
Manual transmission models
141
uu
Gauges and Displays
u
Driver Information Interface
*
Continued
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Door Setup
Keyless Lock Answer
Back
LOCK/UNLOCK- The exterior lights flash.
LOCK (2nd push)- The beeper sounds.
ON
*1
/OFF
Security Relock Timer
Changes the time it takes for the doors to relock and
the security system to set after you unlock the
vehicle without opening any door.
90sec/60sec/30sec
*1
Walk Away Auto Lock
*
Changes the settings for the automatic locking the
doors when you walk away from the vehicle while
carrying the smart entry remote.
ON/OFF
*1
Maintenance
Reset
—
Cancels/Resets the engine oil life display when you
have performed the maintenance service.
Cancel/All Due Items
Default All
—
Cancels/Resets all the customized settings as
default.
Cancel/Set
* Not available on all models
142
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
■
Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Refueled are
shown below. The default setting for “Trip A” Reset Timing is Manually Reset.
1. Press the
button to select Vehicle
Settings, then press the ENTER button.
2. Press the
/
button until Meter Setup
appears on the display.
3. Press the ENTER button.
u
Language Selection appears first in the
display.
3
4
143
uu
Gauges and Displays
u
Driver Information Interface
*
In
strum
e
nt Pa
nel
4. Press
the
/
button
until
“Trip A”
Reset Timing appears on the display, then
press the ENTER button.
u
The display switches to the
customization setup screen, where you
can select When Refueled, IGN OFF,
Manually Reset, or Exit.
5. Press the
/
button and select When
Refueled, then press the ENTER button.
u
The When Refueled Setup screen
appears, then the display returns to the
customization menu screen.
6. Press the
/
button until Exit appears
on the display, then press the ENTER
button.
7. Repeat Step 6 until you return to the
normal screen.
3
4
3
4
3
4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст