Honda Accord Coupe L4 (2011 year). Manual — part 14
You can also choose a track directly
from a track list. Press ENTER on
the interface selector, and the track
list screen will be shown. If there are
no track names, track numbers are
displayed. You will see the current
track is highlighted. Turn the
interface knob to select the desired
track, then press ENTER on the
interface selector.
To exit the track list display, press
the AUDIO button, or push the
interface selector to the left.
When you press the SCAN side of
the SCAN/A. SEL bar or scroll down
and push the interface selector to
the left, the next track of the current
track plays for about 10 seconds.
You will see SCAN next to TRACK
on the screen and center display. To
listen to the rest of the track, press
and hold the SCAN side of the bar
until you hear a beep or push the
interface selector to the left again
within 10 seconds.
If you don’t, the system advances to
the next track, plays about 10
seconds of it, and continues through
the rest of the tracks the same way.
When you press the SCAN side of
the SCAN/A. SEL bar repeatedly
until you see D-SCAN in the center
display, or push the interface
selector to the right, the first track of
the current disc plays for about 10
seconds. You will see SCAN next to
DISC on the screen. The disc
number is blinking and SCAN is also
shown in the center display. To listen
to the rest of the disc, press and hold
the SCAN side of the bar until you
hear a beep, or push the interface
selector to the right again within 10
seconds.
If you don’t, the system advances to
the next disc, plays about 10 seconds
of its first track, and continues
through the rest of the discs the
same way. When the system reaches
the last disc, DISC SCAN is canceled,
and that disc continues to play.
To Choose a Track
Track Scan
Disc Scan
Playing Discs (Models with navigation system)
Fe
a
tu
re
s
TRACK LIST
Main Menu
To replay the current track
continuously, select TRACK
REPEAT, and press ENTER on the
interface selector. As a reminder,
you will see REPEAT next to
TRACK on the screen. To turn this
feature off, highlight TRACK
REPEAT (if not already highlighted),
and press ENTER on the interface
selector again.
You can select any type of repeat and
random modes by using the
interface dial.
Push the AUDIO button to display
the audio information on the screen,
then scroll down by pushing down
the selector to select the audio menu.
To cancel the selected repeat or
random mode, have the selected
mode highlighted, then press
ENTER on the interface selector.
Turn the interface knob to select a
desired repeat or random mode, then
press ENTER to set your selection.
To Select Repeat or Random
Mode:
Track Repeat
Playing Discs (Models with navigation system)
Push down the selector.
AUDIO MENU SCREEN
Main Menu
To replay the current disc
continuously, select DISC REPEAT,
and press ENTER on the interface
selector. As a reminder, you will see
REPEAT next to DISC on the screen.
To turn this feature off, highlight
DISC REPEAT (if not already
highlighted), and press ENTER on
the interface selector again.
To play the tracks on the current
disc in random order, select TRACK
RANDOM, and press ENTER on the
interface selector. As a reminder,
you will see RANDOM next to
TRACK on the screen. To turn this
feature off, highlight TRACK
RANDOM (if not already
highlighted), and press ENTER on
the interface selector again.
To take the system out of disc mode,
press the FM/AM button, the
button, or the AUX button (if
an appropriate unit is connected). To
return to disc mode, press the CD
button.
If you turn the system off while a
disc is playing, either with the
power/volume knob or the ignition
switch, play will continue at the same
point when you turn it back on.
You can also press the MODE
button on the steering wheel to
change modes.
Disc Repeat
Random Play
To Stop Playing a Disc
Playing Discs (Models with navigation system)
Fe
a
tu
re
s
Main Menu
The changer plays MP3/WMA files
in recorded order. Each disc can
hold up to 400 playable files within 8
folder layers. When playing MP3
discs, a disc can support a maximum
number of 100 folders, and each
folder can hold 255 playable files.
Using the interface selector, you can
see the list of all the files and folders
within a disc. While playing a MP3/
WMA disc, press the AUDIO button.
The currently playing folder and file
information comes on the screen.
To play an MP3/WMA disc, use the
disc controls previously described,
along with the following information.
Depending on the software the files
were made with, it may not be
possible to play some files, or display
some text data.
While playing an MP3/WMA disc,
you can select a folder within the
disc by pressing either side of the
category bar. Each time you press
either side of the bar, the folder title
and its first file’s information appear
in the center display in recorded
order.
Changing and Selecting the Folders/
Files
Playing an MP3/WMA Disc
Changing the Folders
Playing Discs (Models with navigation system)
MP3/WMA INDICATOR
Main Menu
This feature, when activated,
samples the first file in each folder
for 10 seconds. To scan a folder,
press the SCAN side of the SCAN/
A. SEL bar repeatedly. You will see
SCAN next to FOLDER and the
folder number blinking.
To listen to the rest of the folder,
press and hold the SCAN side of the
bar until you hear a beep. If you do
nothing, the system advances to the
next folder, plays 10 seconds of it,
and continues with the remaining
folders in the same way. When the
system has finished sampling the
first file in all folders, folder scan is
canceled, and the last file played
continues to play.
Push ENTER on the selector to
show the folder list. Turn the
selector knob, highlight the folder
you want to see the information
within, and press ENTER.
If the root folder has some additional
folders in the lower layer, they will
be listed on the screen.
You can see the list of all the files in
the selected folder. Turn the selector
knob, then press ENTER to set your
selection.
Playing Discs (Models with navigation system)
Folder Scan
Fe
a
tu
re
s
CURRENT TRACK
CURRENT FOLDER
Main Menu
To remove the disc that is currently
playing, press the eject button. You
will see ‘‘EJECT’’ in the center
display. When you remove the disc
from the slot, the system
automatically enters the previous
mode AM, FM1, FM2, or XM Radio.
The system also begins the load
sequence so you can load another
disc. If you do not load another disc,
the load sequence is canceled, and
the system continues playing in the
previous mode.
If you do not remove the disc from
the slot, the system will reload the
disc after 10 seconds. To begin
playing the disc, press the CD button.
This feature, when activated, replays
all files in the selected folder. To
activate folder repeat mode, select
FOLDER REPEAT by using the
interface knob, and press ENTER on
the interface selector. You will see
REPEAT next to FOLDER on the
screen. To turn this feature off,
highlight FOLDER REPEAT (if not
already highlighted), and press
ENTER on the interface selector
again.
To select any type of the repeat
modes, use the interface dial. For
more information, see page
.
This feature, when activated, plays
all files in the current folder in
random order. To activate folder
random play, select FOLDER
RANDOM by using the interface
knob, and press ENTER on the
interface selector. You will see
RANDOM next to FOLDER on the
screen. To turn this feature off,
highlight FOLDER RANDOM (if not
already highlighted), and press
ENTER on the interface selector
again.
To select any type of the random
modes, use the interface dial. For
more information, see page
.
Playing Discs (Models with navigation system)
Removing Discs from the
Changer
Folder Repeat
Folder Random
Main Menu
To remove a different disc from the
changer, first select it by pressing
the corresponding number on the
preset button or turning the
interface knob, and pressing ENTER
on the interface selector. When that
disc begins playing, press the eject
button.
When you press the eject button
while listening to the radio, or with
the audio system turned off, the disc
that was last selected is ejected.
After that disc is ejected, pressing
the eject button again will eject the
next disc in numerical order. By
doing this six times, you can remove
all the discs from the changer.
You can also eject discs when the
ignition switch is off:
To eject one disc, press and release
the eject button.
To eject all discs, press and hold the
eject button until the first disc begins
to eject.
For information on how to handle
and protect compact discs, see page
.
Playing Discs (Models with navigation system)
Protecting Discs
Fe
a
tu
re
s
Main Menu
The chart on the right explains the
error messages you may see in the
center display while playing a disc.
If you see an error message in the
center display while playing a disc,
press the eject button. After ejecting
the disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page
.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
Cause
Error Message
Solution
High Temperature
Track/File format not
supported
Mechanical Error
Servo Error
Disc Error
Will disappear when the temperature returns to
normal.
Current track will be skipped. The next
supported track or file plays automatically.
Press the EJECT button and pull out the disc(s).
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(see page 233). Insert the disc again. If the code
does not disappear, or the disc(s) cannot be
removed, consult your dealer. Do not try to
force the disc out of the player.
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(see page 233).
Disc Changer Error Messages (Models with navigation system)
HEAT ERROR
UNSUPPORTED
BAD DISC
PLEASE CHECK
OWNERS
MANUAL PUSH
EJECT
MECH ERROR
BAD DISC
PLEASE CHECK
OWNERS
MANUAL
CHECK DISC
Main Menu
Playing an iPod (Models with navigation system)
Fe
a
tu
re
s
AUDIO BUTTON
MAP BUTTON
CANCEL BUTTON
CENTER DISPLAY
AUX BUTTON
SKIP BAR
U.S. model is shown.
iPod INDICATOR
NAVIGATION SCREEN
INTERFACE DIAL
POWER/VOLUME KNOB
Main Menu
This audio system can operate the
audio files on the iPod with the
same controls used for the in-dash
disc changer. To play an iPod,
connect it to the USB adapter cable
in the console compartment by using
your dock connector, then press the
AUX button. The ignition switch
must be in the ACCESSORY (I) or
ON (II) position. The iPod will also
be recharged with the ignition switch
in these positions.
The audio system reads and plays
playable sound files on the iPod. The
system cannot operate an iPod as a
mass storage device. The system will
only play songs stored on the iPod
with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc.
You can select the AUX mode by
using the navigation system voice
control buttons, but cannot operate
the play mode functions.
iPods compatible with your audio
system using the USB adapter cable
are:
Software
Ver. 1.1.2 or more
Ver. 2.0.1 or more
Ver. 1.3.0 or more
Ver. 1.3.1 or more
Ver. 1.1.3 or more
Ver. 1.1.3 or more
Ver. 1.0.3 or more
Ver. 1.0.1 or more
Ver. 1.1.5 or more
Ver. 2.2.1 or more
Model
iPod classic
(80/160 G)
iPod classic
(120 G)
iPod with video
(iPod 5th
generation)
iPod nano
iPod nano
2nd generation
iPod nano
3rd generation
iPod nano
4th generation
iPod nano
5th generation
iPod touch
iPod touch
2nd generation
To Play an iPod
Voice Control System
Playing an iPod (Models with navigation system)
Main Menu
Install the dock connector to the
USB adapter cable securely.
Connect your dock connector to
the iPod correctly and securely.
Pull out the USB connector from
the holder.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
Do not connect your iPod using a
hub.
Do not keep the iPod in the
vehicle. Direct sunlight and high
heat will damage it.
Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.
We recommend backing up your
data before playing it.
Use only compatible iPods with the
latest software. iPods that are not
compatible will not work in this audio
unit.
1.
2.
3.
CONTINUED
Connecting an iPod
Playing an iPod (Models with navigation system)
Fe
a
tu
re
s
NOTE:
DOCK CONNECTOR
USB CONNECTOR
USB ADAPTER CABLE
USB CONNECTOR
Main Menu
−
If the iPod indicator does not appear
in the audio display, check the
connections, and try to reconnect the
iPod a few times.
If the audio system still does not
recognize the iPod, the iPod may
need to be reset. Follow the
instructions that came with your
iPod, or you can find reset
instructions online at
The current file number and total of
the selected playable files are
displayed in the center display.
Pressing the AUDIO button displays
the artist, album and track (file)
names on the navigation screen.
Use the SKIP bar while an iPod is
playing to select passages and
change files.
Each time you press and
release the
side of the SKIP bar,
the system skips forward to the
beginning of the next file. Press and
release the
side of the bar to
skip backward to the beginning of
the current file. Press it again to skip
to the beginning of the previous file.
To move rapidly within a file, press
and hold either side (
or
)
of the SKIP bar.
www.apple.com/
itunes/
To Change or Select Files
SKIP
Playing an iPod (Models with navigation system)
Main Menu
You can also change files with the
interface dial. Press the AUDIO
button to show the audio control
display on the navigation screen.
Push the selector to the right side to
skip forward and to the left side to
skip backward.
You can also select a file from any of
the iPod menus: playlists, artists,
albums and songs, by using the
interface dial. Press the AUDIO
button to display the audio control
display on the navigation screen.
Push up the interface selector to
display the iPod menu. Turn the
knob on the interface dial to select a
desired list.
Push ENTER on the selector to
display the items on that list, then
turn the knob on the interface dial to
select a desired list. Pushing the
selector up or down moves a
selection to the top or bottom of the
screen items. Press ENTER to set
your selection.
CONTINUED
To Select a File from iPod Menu
Playing an iPod (Models with navigation system)
Fe
a
tu
re
s
Main Menu
If you select ‘‘ALL’’ on either the
artists or albums list, all available
files on the selected list are played.
Press the AUDIO button to go back
to the normal audio playing display.
Pressing the CANCEL button goes
back to the previous screen, and
pressing the MAP button cancels the
audio control display on the screen.
You can select any type of repeat and
random mode on the audio menu.
Press the AUDIO button to display
the audio control screen, then push
down the selector to display the
audio menu. Turn the knob on the
interface dial to select an audio
mode: repeat, album random, and
track random. Press ENTER to set
your selection.
To cancel the selected mode, press
ENTER again while the highlighted
mode is selected on the audio control
display.
To Select Repeat or Random Mode:
Playing an iPod (Models with navigation system)
Push down the selector.
Main Menu
−
−
−
This feature
continuously plays a file.
To turn it off, press ENTER again.
Pressing either side of the SKIP bar
changes the file while keeping the
repeat feature.
This feature
plays all available files from the
selected items in the iPod menu list
(playlists, artists, albums or songs)
in random order. You will see
TRACK RANDOM on the screen.
To turn it off, have this mode
highlighted and press ENTER again.
This feature
plays all available albums from the
selected items in the iPod menu list
(playlists, artists, albums or songs)
in random order. The files in each
album are played in the recorded
order. You will see ALBUM
RANDOM on the screen.
CONTINUED
REPEAT
TRACK RANDOM
ALBUM RANDOM
Playing an iPod (Models with navigation system)
Fe
a
tu
re
s
Main Menu
＊
＊
To turn it off, have this mode
highlighted and press ENTER again.
You can also select another list from
the iPod menu while keeping the
random function.
Available operating functions vary on
models or versions. Some functions
may not be available on the vehicle’s
audio system.
To play the radio, press the FM/AM,
or
button. Press the CD button
to switch to the disc mode. Press the
AUX button to switch back to the
iPod.
You can disconnect the iPod at any
time when you see the ‘‘OK to
disconnect’’ message in the iPod
display. Always make sure you see
‘‘OK to disconnect’’ message in the
iPod display before you disconnect it.
Make sure to follow the iPod’s
instructions on how to disconnect
the dock connector from the USB
adapter cable.
The displayed message may
vary on models or versions. On
some models, there is no
message to disconnect.
When you disconnect the iPod while
it is playing, the center display and
the audio screen (if selected) show
NO DATA.
If you reconnect the same iPod, the
system may begin playing where it
left off, depending on what mode the
iPod is in when it is reconnected.
If you see an error message in the
center display, see page
.
:
To Stop Playing Your iPod
iPod Error Messages
Playing an iPod (Models with navigation system)
Disconnecting an iPod
NOTE:
Main Menu
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст