Honda Crosstour (2015 year). Manual — part 11
uu
Climate Control System
*
u
Using Automatic Climate Control
160
Co
ntrols
■
To rapidly defrost the windows
1. Press the
button.
2. Press the
button.
Models without audio/
information screen
Models with audio/
information screen
1
To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode. If you keep the system in recirculation mode,
the windows may fog up from humidity. This
impedes visibility.
161
uu
Climate Control System
*
u
Synchronized Mode
Co
ntrols
Synchronized Mode
You can set the temperature synchronously for the driver side and the passenger
side in synchronized mode.
1. Press the SYNC button.
u
The system will switch to synchronized mode.
2. Adjust the temperature using driver’s side temperature control switch.
Press the SYNC button to return to dual mode.
1
When you press the
button, the system changes
to synchronized mode.
When the system is in dual mode, the driver side
temperature and the passenger side temperature can
be set separately.
The system adjusts each temperature based on the
information of the sunlight sensor and the sun
position updated by the navigation system’s GPS.
Models with navigation system
Models without audio/
information screen
Models with audio/
information screen
162
uu
Climate Control System
*
u
Automatic Climate Control Sensors
Co
ntrols
Automatic Climate Control Sensors
The automatic climate control system is
equipped with sensors. Do not cover or spill
any liquid on them.
Sensor
Sensor
163
Features
This chapter describes how to operate technology features.
About Your Audio System. . . . 164
USB Adapter Cable . . . . . . .. 165
Auxiliary Input Jack . . . . . . .. 165
Audio System Theft Protection . . . 166
Region Setting
Audio Remote Controls. . . . . 168
Audio System Basic Operation . . 169
Audio System Basic Operation . . 182
Models without navigation system
Audio system without touch screen
Audio system with touch screen
Audio System Basic Operation . . 215
Audio Error Messages . . . . . .. 268
General Information on the Audio
System . . . . . . . . . . . . 276
HomeLink® Universal Transceiver
Bluetooth® HandsFreeLink® . 319, 331, 366
Compass
Models with navigation system
* Not available on all models
164
Features
Audio System
About Your Audio System
The audio system features AM/FM radio. It can also play audio CDs, WMA/MP3/AAC
files, USB flash drives and iPod devices.
You can operate the audio system from the buttons and switches on the panel, or
the remote controls on the steering wheel.
The audio system features AM/FM radio and SiriusXM® Radio service
*
. It can also
play audio CDs, WMA/MP3/AAC files, Hard Disc Drive (HDD) audio
*
, USB flash
drives, and iPod, iPhone and Bluetooth® devices.
You can operate the audio system from the buttons and switches on the panel, the
icons on the touchscreen interface, or the remote controls on the steering wheel.
See the Navigation System Manual for information on the navigation system.
1
SiriusXM® Radio is available on a subscription basis
only. For more information on SiriusXM® Radio,
contact a dealer.
2 General Information on the Audio System
P. 276
SiriusXM® Radio is available in the United States and
Canada, except Hawaii, Alaska, and Puerto Rico.
SiriusXM® is a registered trademark of Sirius XM
Radio, Inc.
Video CDs, DVDs, and 3-inch (8-cm) mini CDs are not
supported.
iPod, iPhone and iTunes are trademarks of Apple Inc.
State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.
Audio system without touch screen
Audio system with touch screen
Remote Control
iPod
USB Flash
Drive
Models with navigation system
* Not available on all models
165
uu
Audio System
u
USB Adapter Cable
Features
USB Adapter Cable
1. Unclip the USB connector and loosen the
adapter cable.
2. Install the iPod dock connector or the USB
flash drive to the USB connector.
Auxiliary Input Jack
Use the jack to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.
u
The audio system automatically switches
to the AUX mode.
1
•
Do not leave the iPod or USB flash drive in the
vehicle. Direct sunlight and high temperatures may
damage it.
•
Do not use an extension cable with the USB
adapter cable.
•
Do not connect the iPod or USB flash drive using a
hub.
•
Do not use a device such as a card reader or hard
disk drive, as the device or your files may be
damaged.
•
We recommend your data backed up before using
the device in your vehicle.
•
Displayed messages may vary depending on the
device model and software version.
If the audio system does not recognize the iPod, try
reconnecting it a few times or reboot the device. To
reboot, follow the manufacturer's instructions
provided with the iPod or visit www.apple.com/ipod.
1
To switch the mode, press any of the audio mode
buttons. You can return to AUX mode by pressing
the AUX button.
You can return to AUX mode by selecting Change
Source on the Audio menu screen or Source on the
touch screen.
You cannot use the auxiliary input jack if you replace
the audio system.
Audio system without touch screen
Audio system with touch screen
166
uu
Audio System
u
Audio System Theft Protection
Features
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead.
■
Reactivating the audio system
1. Turn the ignition switch to ON
(
w, and turn on the audio system.
u
If you turn the ignition switch to ACCESSORY
(
q, you will be requested to
enter the audio security code.
u
You can find out about your serial number and security code from a dealer.
2. Enter the audio security code using the preset buttons.
3. If you enter an incorrect digit, continue to the last digit, then try again. If you do
not enter the code correctly after 10 tries, leave the system for one hour before
trying again, or visit a dealer to have the system reset.
1. Turn the ignition switch to ON
(
w
*1
.
2. Turn on the audio system.
3. Press and hold the audio system power button for more than two seconds.
u
The audio system is reactivated when the audio control unit establishes a
connection with the vehicle control unit. If the control unit fails to recognize
the audio unit, you must go to a dealer and have the audio unit checked.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
1
Find the audio system’s security code and serial
number label in your owner’s manual kit.
Do not store the label in your vehicle. If you lose the
label, you must first retrieve the serial number, and
then obtain the code.
You can register the security code at Honda Owners
(owners.honda.com.), and find information on how
to retrieve the serial number and obtain the code at
radio-navicode.honda.com.
We recommend that you write down the serial
number in this owner’s manual.
You can find out about your serial number and
security code from a dealer.
U.S. models
Audio system without touch screen
U.S. models
Audio system without touch screen
U.S. models
Audio system without touch screen
Audio system without touch screen
Audio system without touch screen
Audio system without touch screen
Canadian models
Audio system with touch screen
167
uu
Audio System
u
Region Setting
*
Features
Region Setting
*
The audio system’s region setting will be lost when the battery is disconnected or
goes dead.
If the Region Select screen appears, you need to set the region for the audio
system. Follow the steps below:
1. Press
to
select
OK.
2. Rotate
to select the region you live in, then press
.
3. You will receive a confirmation message on the screen. Rotate
to select Yes,
then press
.
1
The region setting is required only when the battery
power is temporarily disconnected. It has been
usually set to your vehicle’s region type beforehand.
You cannot change the setting once you have
completed the setting procedure. Contact a dealer if
you selected an incorrect region.
These indications are used to show how to operate
the MENU/SEL (Selector) knob or the interface dial.
Rotate
to
select.
Press
to enter.
* Not available on all models
168
uu
Audio System
u
Audio Remote Controls
Features
Audio Remote Controls
Allows you to operate the audio system while driving.
SOURCE Button
Cycles through the audio modes as follows:
FM
AM
XM
*
CD HDD
*
USB
iPod Bluetooth® Audio
*
Pandora®
*
Aha
TM*
AUX
(
+
(
- (Volume) Buttons
Press
(
+: To increase the volume.
Press
(
-: To decrease the volume.
Buttons
• When listening to the radio
Press : To select the next preset radio station.
Press : To select the previous preset radio station.
Press and hold
: To select the next strong station.
Press and hold
: To select the previous strong station.
• When listening to a CD, HDD
*
, iPod, USB flash drive, or Bluetooth® Audio
*
Press : To skip to the next song.
Press : To go back to the beginning of the current or previous song.
• When listening to a CD, HDD
*
or USB flash drive
Press and hold
: To skip to the next folder.
Press and hold
: To go back to the previous folder.
• When listening to Pandora®
*
or Aha
TM*
Press : To skip to the next song.
Press and hold
: To select the next station.
Press and hold
: To select the previous station.
1
The CD mode appears only when a CD is loaded.
Pandora®, Bluetooth® Audio, and Aha
TM
appear
when a connection (Bluetooth® or USB) is established
with a device.
When in the AUX mode, the following is operable
from the remote controls:
•
iPod/USB flash drive connected to the USB adapter
cable
Audio system without touch screen
Button
SOURCE Button
Button
(
+ Button
(
- Button
* Not available on all models
169
Features
Audio System Basic Operation
To use the audio system function, the ignition switch must be in ACCESSORY
(
q or
ON
(
w.
Use the selector knob or MENU button to
access some audio functions.
Press
to switch between the normal and
extended display for some functions. The
extended display has three segments to
display detailed information.
Selector knob: Rotate left or right to scroll
through the available choices. Press
to set
your selection.
MENU button: Press to select any setting
such as the clock, sound control, or the
compass
*
. Press this button again to cancel
the menu display mode.
RETURN button: Press to go back to the
previous display.
Audio system without touch screen
1
These indications are used to show how to operate
the selector knob.
Rotate
to select.
Press
to enter.
Press the SOURCE,
(
+,
(
-,
or
button on the
steering wheel to change any audio setting.
2 Audio Remote Controls P. 168
RETURN
Button
Selector
Knob
MENU
Button
Menu Display
* Not available on all models
170
uu
Audio System Basic Operation
u
Adjusting the Sound
Features
Adjusting the Sound
Press the MENU button, and rotate
to
adjust the setting, then press
. Rotate
to
scroll through the following choices:
1
When the adjustment level reaches the center, you
will see C in the display.
The SVC has four modes: OFF, LOW, MID, and
HIGH.
SVC adjusts the volume level based on the vehicle
speed. As you go faster, audio volume increases. As
you slow down, audio volume decreases.
Selector
Knob
MENU
Button
RETURN
Button
BASS
TREBLE
FADER
BALANCE
SUBW
SVC
CLOCK ADJUST
Speed-sensitive
Volume
Compensation
Subwoofer
Clock setting
FADER is selectable.
171
uu
Audio System Basic Operation
u
Playing AM/FM Radio
Continued
Features
Playing AM/FM Radio
FM Button
Press to select a band.
SCAN Button
Press to sample each of the
strongest stations on the
selected band for 10 seconds.
To turn off scan, press the
button again.
VOL/
(Volume/Power) Knob
Press to turn the audio system
on and off.
Turn to adjust the volume.
Preset Buttons (1-6)
To store a station:
1. Tune to the selected station.
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
Selector Knob
Turn to tune the radio frequency.
TITLE Button
Press to switch the RDS name
on and off.
FOLDER Bar
Press either side to display and
select an RDS category.
SKIP Bar
Press and hold to search up and
down the selected band for a
station with a strong signal.
A.SEL (Auto Select) Button
Press to scan both bands and store
the strongest station in each preset.
To turn off auto select, press the
button again. This restores the
presets you originally set.
AM Button
uu
Audio System Basic Operation
u
Playing AM/FM Radio
172
Features
Provides text data information related to your selected RDS-capable FM station.
■
RDS INFO ON
Press the TITLE button while listening to an RDS capable station. RDS INFO ON
appears, and the station name is displayed.
■
To find an RDS station from your selected program category
1. Press the FOLDER bar to display and select
an RDS category.
2. Use SKIP or SCAN to select an RDS station.
■
Radio Data System (RDS)
1
The ST indicator appears on the display indicating
stereo FM broadcasts.
Stereo reproduction in AM is not available.
Switching the Audio Mode
Press the SOURCE button on the steering wheel.
2 Audio Remote Controls P. 168
You can store six AM stations and twelve FM stations
into the preset button memory. FM1 and FM2 let you
store six stations each.
Auto Select function scans and stores up to six AM
stations and twelve FM stations with a strong signal
into the preset button memory.
If you do not like the stations auto select has stored,
you can manually store your preferred frequencies.
RDS Category
173
uu
Audio System Basic Operation
u
Playing a CD
Continued
Features
Playing a CD
Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3 or WMA
format. With the CD loaded, press the CD button.
LOAD Button
Press to load a CD.
Press until you hear a beep and see
LOAD in the display to load CDs.
SCAN Button
You will get a 10-second sampling of each song.
●
Press to sample all tracks on the CD (all files in
the current folder in MP3 or WMA).
●
Press two times to sample the first file in each
of the main folders (MP3 or WMA).
●
Press three times to sample the first track on
each CD (the first file in the main folder on
each disc in MP3 or WMA).
●
To turn off scan, press and hold the button.
VOL/
(Volume/Power) Knob
Press to turn the audio system
on and off.
Turn to adjust the volume.
CD Slot
Insert a CD about halfway into the
CD slot.
SKIP Bar
Press
or
to change tracks
(files in MP3 or WMA).
CD Button
Press to play a CD.
(CD Eject) Button
Press to eject a CD.
FOLDER Bar
Press to skip to the next folder,
and to skip to the beginning of
the previous folder in MP3 or WMA.
TITLE Button
Press to display the text data on a CD
(if it was recorded with text data).
MENU Button
Press to display menu items
(if available).
Selector Knob
Turn to change tracks/files. Turn
to select an item, then press to set
your selection.
RETURN Button
Press to go back to the previous
display.
uu
Audio System Basic Operation
u
Playing a CD
174
Features
1. Press
to switch the display to a folder list.
2. Rotate
to select a folder.
3. Press
to change the display to a list of
files in that folder.
4. Rotate
to select a file, then press
.
■
How to Select a File from a Folder with the Selector Knob
(MP3/WMA)
1
NOTICE
Do not use CDs with adhesive labels. The label can
cause the CD to jam in the unit.
WMA files protected by digital rights management
(DRM) cannot be played.
The audio system displays UNSUPPORTED, then
skips to the next file.
Text data appears on the display under the following
circumstances:
•
When you select a new folder, file, or track.
•
When you change the audio mode to CD.
•
When you insert a CD.
The display shows up to 31 characters of text data.
Press and hold the TITLE button to see additional
characters. indicates that the text data continues.
The display goes back to the previous screen if you
press and hold the button again.
If you eject the CD but do not remove it from the slot,
the system reloads the CD automatically after several
seconds.
Folder Selection
Track Selection
175
uu
Audio System Basic Operation
u
Playing a CD
Features
You can select repeat, random, and scan modes when playing a track or files.
1. Press the MENU button.
2. Rotate
to select PLAY MODE, then
press .
3. Rotate
to select a mode, then press
.
■
To turn off a play mode
1. Press the MENU button.
2. Rotate
to select PLAY MODE, then press
.
3. Rotate
to select NORMAL PLAY, then press
.
■
How to Select a Play Mode
1
Press the RETURN button to go back to the previous
display, and press the MENU button to cancel this
setting mode.
Play Mode Menu Items
NORMAL PLAY
REPEAT ONE TRACK: Repeats the current track/file.
REPEAT ONE FLD (MP3/WMA): Repeats all files in
the current folder.
REPEAT DISC: Repeats the current CD.
RANDOM IN FLD (MP3/WMA): Plays all files in the
current folder in random order.
RANDOM IN DISC: Plays all tracks/files in the current
CD in random order.
SCAN TRK (MP3/WMA): Samples all tracks on the
CD. Samples all files in the current folder.
SCAN FLD (MP3/WMA): Samples the first file in
each folder on the CD.
SCAN DISC: Samples the first track/file on each CD.
Play Mode
Items
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст