Honda Civic (2019 year). Manual — part 7
96
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Message
Condition
Explanation
●
Appears when the engine coolant temperature gets
abnormally high.
●
Appears when you turn the ignition switch to ON
(
w
*1
without fastening the driver’s seat belt.
●
Fasten the seat belt properly before you start to drive.
●
Appears if the automatic brake hold is automatically
canceled while it is in operation.
●
Immediately depress the brake pedal.
●
Appears when the automatic brake hold system is
turned off.
2 Automatic Brake Hold P. 532
Continuously
variable
transmission models
Manual
transmission
models
97
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
●
Fasten the driver’s seat belt.
●
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
●
Press the automatic brake hold button with the brake
pedal depressed.
●
Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 532
2 Parking Brake P. 529
Continuously
variable
transmission models
Manual
transmission
models
98
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
• Press the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 529
Message
Condition
Explanation
●
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(
q.
• Turn the ignition switch to LOCK
(
0, then remove the
key.
• Appears when the ignition key is turned to
ACCESSORY
(
q from ON
(
w. (The driver’s door is
closed.)
—
• Appears when you open the driver’s door while the
ignition key is in LOCK
(
0.
• Remove the key from the ignition switch.
Continuously
variable
transmission models
Manual
transmission
models
Models without smart entry system
99
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after you set the power mode to
ACCESSORY or ON.
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing the
ENGINE START/STOP button.
Models with smart entry system
Continuously
variable
transmission
models
Manual
transmission
models
Except U.S.
models with
continuously
variable
transmission
100
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P.
●
Move the shift lever to
(
P. The power mode changes to
VEHICLE OFF.
●
Move the shift lever to
(
P, then press the ENGINE
START/STOP button twice.
●
Appears when the power mode is in ACCESSORY.
—
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Change the power mode to VEHICLE OFF.
2 ENGINE START/STOP Button P. 161
●
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
●
Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 163
●
Appears when the smart entry remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 596
●
Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine.
A beeper sounds six times.
●
Bring the smart entry remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 629
Models with smart entry system
Continuously
variable
transmission
models
U.S. models
Canadian models
101
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the starter system has a problem.
• As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal and clutch pedal (manual
transmission only), and manually start the engine.
Have your vehicle checked by a dealer.
• Appears as soon as a problem is detected in the
smart entry system or push button starting system.
• Appears constantly - Have your vehicle checked by a
dealer.
Message
Condition
Explanation
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safely, have your
vehicle checked by a dealer as soon as possible.
Models with smart entry system
U.S.
Canada
Models with LED headlights
102
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when ACC with LSF
*
has been
automatically canceled.
●
You can resume the set speed after the condition that
caused ACC with LSF
*
to cancel improves. Press the RES/
+ button.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Adaptive Cruise Control (ACC)
●
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
with LSF
*
is in operation.
●
ACC with LSF
*
has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Adaptive Cruise Control (ACC)
●
Appears when pressing the –/SET button while the
distance between your vehicle and the vehicle
ahead of you is too close.
●
ACC with LSF
*
cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Adaptive Cruise Control (ACC)
●
Appears when the driver’s seat belt is unfastened
while your vehicle is automatically stopped by ACC
with LSF.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
●
Appears when pressing the –/SET button while the
driver’s seat belt is unfastened.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
Models with Honda Sensing®
* Not available on all models
103
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if the VSA® or traction control function
operates while ACC with LSF
*
is in operation.
●
ACC with LSF
*
has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
●
Appears when the vehicle in front of you starts
moving while your vehicle is stopped automatically
by ACC with LSF.
●
Either press the RES/+ button or –/SET button, or
depress the accelerator pedal.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when the shift lever is moved into any
position other than
(
D or
(
S while ACC with LSF is
in operation.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the –/SET button while the
shift lever is in any position other than
(
D or
(
S.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Models with Honda Sensing®
* Not available on all models
104
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the vehicle is stopped on a very steep
slope while ACC with LSF is in operation.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the –/SET button while the
vehicle is stopped on a very steep slope.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Models with Honda Sensing®
* Not available on all models
105
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when ACC with LSF
*
is canceled due to
excessive high vehicle speed.
●
Reduce the speed, then reset ACC with LSF
*
.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
●
Appears when the speed of the vehicle is too high
for you to set ACC with LSF
*
.
●
Reduce the speed, then set ACC with LSF
*
.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
●
Appears when ACC is canceled due to excessive low
vehicle speed.
●
Raise the speed, then reset ACC.
2 Adaptive Cruise Control (ACC)
●
Appears when the speed of the vehicle is too low for
you to set ACC.
●
Raise the speed, then set ACC.
2 Adaptive Cruise Control (ACC)
Models with Honda Sensing®
* Not available on all models
106
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the parking brake is applied
automatically while ACC with LSF is in operation.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Parking Brake P. 529
●
Appears when pressing the –/SET button while the
parking brake is applied.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Parking Brake P. 529
●
Appears when pressing the –/SET button while the
vehicle is moving and the brake pedal is depressed.
●
ACC with LSF
*
cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Adaptive Cruise Control (ACC)
Models with Honda Sensing®
Continuously
variable
transmission
models
Manual
transmission
models
* Not available on all models
107
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the clutch pedal is applied too long
while ACC is in operation.
●
ACC has been automatically canceled.
2 Adaptive Cruise Control (ACC)
P. 499
●
Appears when pressing the –/SET button while the
vehicle is moving and the clutch pedal is depressed.
●
ACC cannot be set.
2 Adaptive Cruise Control (ACC)
P. 499
●
Appears if ACC with LSF is canceled while your
vehicle is automatically stopped by ACC with LSF.
●
Immediately depress the brake pedal.
●
Flashes when the system senses a likely collision
with a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 473
2 Adaptive Cruise Control (ACC) with Low Speed
P. 483
2 Adaptive Cruise Control (ACC)
P. 499
Models with Honda Sensing®
* Not available on all models
108
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the vehicle is driving out of a detected
line. The steering wheel vibrates rapidly.
●
Keep the vehicle within the lane you are driving.
2 Lane Keeping Assist System (LKAS) P. 514
●
Appears when the vehicle is driving out of a detected
lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line. The system
also steers the vehicle to help you remain within
your driving lane.
●
Keep the vehicle within the lane you are driving.
2 Road Departure Mitigation (RDM) System P. 522
●
You can change the setting for the road departure
mitigation system. Normal, Wide, and Warning Only
can be selected.
2 Customized Features P. 124, 337
●
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
●
Operate the steering wheel to resume the LKAS.
●
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
●
If any other system indicators come on, such as the VSA®,
ABS and brake system, take appropriate action.
Models with Honda Sensing®
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Normal or Wide
109
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2 Radar Sensor P. 528
2 Honda Sensing®
• Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
• Use the climate control system to cool down the
camera.
• Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 526
2 Honda Sensing®
P. 170
• Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2 Front Sensor Camera P. 526
2 Honda Sensing®
P. 170
Models with Honda Sensing®
* Not available on all models
110
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.
Message
Condition
Explanation
• Appears when you unlock and open the driver’s
door while the engine is running by remote engine
start.
2 Remote Engine Start with Vehicle Feedback
P. 439
Message
Condition
Explanation
• Appears if there is a problem with the adaptive
damper system.
• Have your vehicle checked by a dealer. With this message
appeared, your vehicle has normal damping ability
without the adaptive damper feature.
• Appears if the drive mode cannot be changed due
to certain situations, such as a system error or
adverse driving conditions.
Models with auto high-beam
Models with remote engine starter
Models with SPORT mode
* Not available on all models
111
Continued
In
strum
e
nt Pa
nel
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON
(
w
*1
.
Displays your driving speed in mph or km/h.
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Speedometer
■
Tachometer
■
Fuel Gauge
■
Temperature Gauge
1
Press the
(display/information) button
repeatedly until the
icon is shown on the driver
information interface. Press ENTER, then press and
hold it again. The speedometer reading and the
displayed measurements will switch between mph
and km/h.
1
You can turn on or off the tachometer display.
2 Customized Features P. 124, 337
1
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
1
NOTICE
Driving with the temperature gauge pointer in the
upper zone can cause serious engine damage. Pull
safely to the side of the road and allow engine
temperature to return to normal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст