Honda Accord Sedan (2016 year). Manual — part 6
80
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Auto High-Beam
Indicator
(Green)
*
●
Comes on when all the operating
conditions of the auto high-beam
are met.
2 Auto High-Beam (High Beam Support
P. 147
—
Auto High-Beam
Indicator
(Amber)
*
●
Comes on if there is a problem with
the auto high-beam.
●
Manually operate the headlight switch.
●
If you are driving with the high-beam
headlights when this happens, the
headlights are changed to low beams.
—
●
Comes on when the area around
the camera on the windshield is
blocked by dirt, mud, etc.
●
Stop your vehicle in a safe place, and wipe
it off with a soft cloth.
●
If the indicator does not go off after
cleaning the lens, have your vehicle
checked by a dealer.
* Not available on all models
81
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Road Departure
Mitigation (RDM)
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem with
the RDM system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when the RDM system
shuts itself off.
●
Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the temperature
inside the camera cools down.
P. 445
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
●
Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
P. 445
* Not available on all models
82
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Adaptive Cruise
Control (ACC)
Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem with
ACC.
●
Comes on while driving - Have your
vehicle checked by a dealer.
●
Comes on if anything covers the
radar sensor cover and prevents the
sensor from detecting a vehicle in
front.
●
May come on when driving in bad
weather (rain, snow, fog, etc.)
●
ACC has been automatically
canceled.
●
When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
●
Have your vehicle checked by a dear if the
indicator does not go off even after you
clean the sensor cover.
Adaptive Cruise
Control (ACC)
Indicator
(White)
*
●
Comes on when you press the
MAIN button.
2 Adaptive Cruise Control (ACC)
—
●
Comes on if the temperature inside
the camera is too high.
●
ACC has been automatically
canceled.
●
Use the climate control system to cool
down the camera.
●
Goes off - The camera has been cooled
down. Pressing the MAIN button can
resume the system.
2 Adaptive Cruise Control (ACC)
* Not available on all models
83
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with the LKAS.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(White)
*
●
Comes on when you press the
MAIN button.
2 Lane Keeping Assist System (LKAS)
P. 464
—
* Not available on all models
84
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Collision
Mitigation
Braking System
TM
(CMBS
TM
)
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when you deactivate
the CMBS
TM
. A multi-information
display message appears for five
seconds.
●
Comes on if there is a problem
with the CMBS
TM
.
●
Stays on constantly without the
CMBS
TM
off - Have your vehicle checked by
a dealer.
2 Collision Mitigation Braking System
●
Comes on when the CMBS
TM
system shuts itself off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
●
When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
●
Have your vehicle checked by a dealer if the
message does not disappear even after you
clean the sensor cover.
2 Collision Mitigation Braking System
●
Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
* Not available on all models
85
uu
Indicators
u
Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Information Display Warning and Information Messages
*
The following messages appear only on the information display.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 575
●
Appears when there is a problem with the sensor on
the battery.
●
Stays on constantly - Have your vehicle checked by a
dealer.
* Not available on all models
86
uu
Indicators
u
Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if you push the ENGINE START/STOP button
to turn the engine off without the shift lever in
(
P.
●
Push the ENGINE START/STOP button twice after
moving the shift lever to
(
P.
●
Appears when the power mode is in ACCESSORY.
—
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing
the ENGINE START/STOP button at the same time.
●
Appears when you close the door with the power mode
in ON without the smart entry remote inside the vehicle.
●
Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
●
Appears when the smart entry remote’s battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 549
Models with smart entry system
Automatic
transmission/CVT
models
U.S. manual
transmission
models
Canadian models
87
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Multi-Information Display Warning and Information Messages
*
The following messages appear only on the multi-information display. Press the
(information) button to see the message again
with the system message indicator on.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 575
●
Appears when the scheduled maintenance is due
soon.
u
Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2 Maintenance Minder Messages on the Multi-
●
Appears when the engine coolant temperature gets
abnormally high.
●
Appears if there is a problem with the automatic
lighting control system.
●
Appears while driving - Manually turn the lights on,
and have your vehicle checked by a dealer.
●
Appears if there is a problem with the low beam
headlights.
●
Appears while driving - The low beam headlights may
not be on. When conditions allow you to drive safely,
have your vehicle checked by a dealer as soon as
possible.
* Not available on all models
88
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if there is a problem with the auto high-
beam.
●
Manually operate the headlight switch.
●
If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears when the area around the camera on the
windshield is blocked by dirt, mud, etc.
●
Stop your vehicle in a safe place, and wipe it off with a
soft cloth.
●
If the message does not disappear after cleaning the
lens, have your vehicle checked by a dealer.
●
Appears if there is a problem with the parking sensor
system. The beeper sounds.
●
Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on even
after you clean the area, have the system checked by a
dealer.
●
Appears when the washer fluid is low.
●
Refill the washer fluid.
2 Refilling Window Washer Fluid P. 528
Models with
auto high-beam
Models with
auto high-beam
Models with
parking sensor
system
Canadian models
89
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the ignition key is turned to
ACCESSORY
(
q from ON
(
w. (The driver’s door is
closed.)
—
●
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(
q.
●
Turn the ignition switch to LOCK
(
0, then remove the
key.
●
Appears when you open the driver’s door while the
ignition key is in LOCK
(
0.
●
Remove the key from the ignition switch.
Models without smart entry system
90
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after you unlock and open the driver’s door.
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing
the ENGINE START/STOP button.
●
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P.
●
Move the shift lever to
(
P. The power mode changes to
VEHICLE OFF.
●
Appears when the power mode is in ACCESSORY.
—
Models with smart entry system
U.S. manual
transmission models
Canadian models
91
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Press the ENGINE START/STOP button twice with your
foot off the brake pedal to change the power mode to
VEHICLE OFF (LOCK).
●
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
●
Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 142
●
Appears when the smart entry remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 549
●
Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine. A beeper
sounds six times.
●
Bring the smart entry remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 566
●
Appears three seconds after the To Start Engine:
Brake + Push message appears.
2 Changing the Power Mode P. 140
●
Appears three seconds after you bring the smart
entry remote in front of the ENGINE START/STOP
button when To Start, Hold Remote Near Start
Button appears. To Start Engine: Brake + Push
appears sequentially.
2 Changing the Power Mode P. 140
Models with smart entry system
92
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears while you are customizing the settings and
the shift lever is moved out of
(
P.
●
Appears when there is a problem with the sensor on
the battery.
●
Appears when the battery is not charging.
●
Have your vehicle checked by a dealer.
2 Checking the Battery P. 548
●
Appears along with the battery charging system
indicator - Turn off the climate control system and rear
defogger to reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 574
●
Appears when the starter system has a problem.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal and manually start the engine.
Have your vehicle checked by a dealer.
●
Appears for about three seconds when ACC has
been automatically canceled.
●
You can resume the set speed after the condition that
caused ACC to cancel improves. Press the RES/+
button.
2 Adaptive Cruise Control (ACC)
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take appropriate action to prevent a collision (apply the
brakes, change lanes, etc.).
2 Adaptive Cruise Control (ACC)
2 Collision Mitigation Braking System
P. 483
* Not available on all models
93
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
●
May appear when driving in bad weather (rain,
snow, fog, etc.).
●
Have your vehicle checked by a dealer if the message
appears again after you cleaned the area around the
camera.
●
Appears if the temperature inside the camera is too
high.
●
ACC/LKAS has been automatically canceled.
●
Use the climate control system to cool down the camera.
●
Goes off - The camera has been cooled down. Pressing
the MAIN/LKAS button can resume the system.
2 Adaptive Cruise Control (ACC)
2 Lane Keeping Assist System (LKAS)
●
Appears when the vehicle is driving out of a detected
line. The steering wheel vibrates rapidly.
●
Keep the vehicle within the lane you are driving.
●
The color of either line changes from white to amber as
the vehicle gets closer to that side of the lane line.
2 Lane Keeping Assist System (LKAS)
●
Appears when the vehicle is driving out of a detected
line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line. The system
also steers the vehicle to help you remain within
your driving lane.
●
Keep the vehicle within the lane you are driving.
●
The color of either line changes from white to amber as
the vehicle gets closer to that side of the lane line.
2 Road Departure Mitigation (RDM) System
●
You can change the setting for the road departure
mitigation system. Normal, Wide, and Warning Only
can be selected.
2 Customized Features P. 103, 298, 316
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Normal or Wide
* Not available on all models
94
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
●
Operate the steering wheel to resume the LKAS.
●
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
●
If any other system indicators come on, such as the
VSA®, ABS and brake system, take appropriate action.
Message
Condition
Explanation
●
Appears when you unlock and open the driver’s
door while the engine is running by smart entry
remote.
P. 425
Models with remote engine starter
* Not available on all models
95
In
strum
e
nt Pa
nel
Gauges and Displays
Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON
(
w
*1
.
Displays your driving speed in mph (U.S.) or km/h (Canada).
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Speedometer
■
Tachometer
■
Fuel Gauge
■
Temperature Gauge
1
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
1
NOTICE
Driving with the temperature gauge pointer in the
upper zone can cause serious engine damage. Pull
safely to the side of the road and allow engine
temperature to return to normal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст