Honda Fit (2019 year). Manual — part 6
79
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
M (7-speed
manual shift
mode) Indicator/
Shift Indicator
*
●
Comes on when 7-speed manual
shift mode is applied.
2 7-Speed Manual Shift Mode P. 421
—
Seat Belt
Reminder
Indicator
●
Comes on and the beeper sounds
if you are not wearing a seat belt
when you turn the ignition switch
to ON
(
w
*1
.
●
If the front passenger is not
wearing a seat belt, the indicator
comes on a few seconds later.
●
Blinks while driving if either you or
the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
●
The beeper stops and the indicator goes
off when you and the front passenger
fasten their seat belts.
●
Stays on after you or the front
passenger has fastened the seat belt
- A detection error may have occurred in
the sensor. Have your vehicle checked by
a dealer.
Models with
information
display
Models with
multi-
information
display
* Not available on all models
80
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Low Fuel
Indicator
*
●
Comes on when the fuel reserve is
running low (approximately 1.59
U.S. gal./6.0 Liter left).
●
Blinks if there is a problem with the
fuel gauge.
●
Comes on - Refuel your vehicle as soon
as possible.
●
Blinks - Have your vehicle checked by a
dealer.
Anti-lock Brake
System (ABS)
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
If it comes on at any other time,
there is a problem with the ABS.
●
Stays on constantly - Have your vehicle
checked by a dealer. With this indicator
on, your vehicle still has normal braking
ability but no anti-lock function.
2 Anti-lock Brake System (ABS) P. 470
Supplemental
Restraint System
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if a problem with any of
the following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
●
Stays on constantly or does not come
on at all - Have your vehicle checked by a
dealer.
* Not available on all models
81
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
High
Temperature
Indicator
(Red)
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Blinks when the engine coolant
temperature goes up, and stays on
if the temperature continues to
rise.
●
Goes off, then comes on blue when the
engine coolant temperature is low.
●
Blinks while driving - Drive slowly to
prevent overheating.
●
Stays on while driving - Immediately
stop in a safe place and allow the engine
to cool.
2 Overheating P. 558
Low
Temperature
Indicator
(Blue)
●
Comes on when the engine
coolant temperature is low.
●
If the indicator stays on after the engine
has reached normal operating
temperature, there may be a problem
with the temperature sensors. Have your
vehicle inspected by a dealer.
—
Vehicle Stability
Assist® (VSA®)
System Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Blinks when VSA® is active.
●
Stays on constantly - Have your vehicle
checked by a dealer.
2 Vehicle Stability Assist® (VSA®), aka
Electronic Stability Control (ESC),
System P. 459
●
Comes on if there is a problem
with the VSA® system or hill start
assist system.
* Not available on all models
82
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Vehicle Stability
Assist® (VSA®)
OFF Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when you deactivate
VSA®.
—
Door and
Tailgate Open
Indicator
*
●
Comes on for a few seconds if you
turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if any door or the
tailgate is not completely closed.
●
The beeper sounds and the
indicator comes on if any door or
the tailgate is opened while
driving.
●
Goes off when all doors and the tailgate
are closed.
—
Electric Power
Steering (EPS)
System Indicator
●
Comes on when you turn the
ignition switch to ON
(
w
*1
, and
goes off when the engine starts.
●
Comes on if there is a problem
with the EPS system.
●
Stays on constantly or does not come
on at all - Have your vehicle checked by a
dealer.
2 If the Electric Power Steering (EPS)
System Indicator Comes On P. 562
* Not available on all models
83
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Low Tire
Pressure/TPMS
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
May come on briefly if the ignition
switch is turned to ON
(
w
*1
and
the vehicle is not moved within 45
seconds, to indicate the calibration
process is not yet complete.
●
Comes on and stays on when:
- One or more tires’ pressures are
determined to be significantly
low.
- The system has not been
calibrated.
●
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
●
Stays on after the tires are inflated to
the recommended pressures - The
system needs to be calibrated.
2 TPMS Calibration P. 463
●
Blinks for about one minute, and
then stays on if there is a problem
with the TPMS, or when a compact
spare tire is temporarily installed.
●
Blinks and remains on - Have your
vehicle checked by a dealer. If the vehicle
is fitted with a compact spare, get your
regular tire repaired or replaced and put
back on your vehicle as soon as you can.
Smart Entry
System
Indicator
*
●
Comes on for a few seconds when
you change the power mode to
ON.
●
Comes on as soon as a problem is
detected in the smart entry system
or push button starting system.
●
Stays on constantly or does not come
on at all - Have your vehicle checked by
a dealer.
U.S.
models
only
* Not available on all models
84
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
System Message
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on along with a beep when
a problem is detected. A system
message on the driver information
interface appears at the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●
The turn signal indicators blink
when you operate the turn signal
lever.
●
If you press the hazard warning
button, both indicators and all turn
signals blink at the same time.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown. Change
the bulb immediately.
2 Replacing Light Bulbs P. 512, 515
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
—
—
Lights On
Indicator
●
Comes on whenever the light
switch is on, or in AUTO
*
when
the exterior lights are on.
●
If you remove the key from the ignition
switch*, or set the power mode* to
VEHICLE OFF (LOCK) while the exterior
lights are on, a chime sounds when the
driver’s door is opened.
—
* Not available on all models
85
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Fog Light
Indicator
*
●
Comes on when the fog lights are
on.
—
—
Immobilizer
System Indicator
●
Comes on briefly when you turn
the ignition switch to ON
(
w
*1
,
then goes off.
●
Comes on if the immobilizer
system cannot recognize the key
information.
●
Blinks -
You cannot start the engine. Turn the
ignition switch to LOCK
(
0, pull the key
out, and then insert the key and turn it to
ON
(
w again.
You cannot start the engine. Set the
power mode to VEHICLE OFF (LOCK),
then select the ON mode again.
●
Repeatedly blinks - The system may be
malfunctioning. Have the vehicle checked
by a dealer.
●
Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
—
ECON Mode
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when you press the
ECON button.
Models without smart entry system
Models with smart entry system
* Not available on all models
86
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
*
Security System
Alarm Indicator
●
Blinks when the security system
alarm has been set.
2 Security System Alarm P. 148
—
CRUISE MAIN
Indicator
*
●
Comes on when you press the
CRUISE button.
—
CRUISE
CONTROL
Indicator
*
●
Comes on if you have set a speed
for cruise control.
—
Indicator
Models with
information
display
Models with
multi-
information
display
Indicator
* Not available on all models
87
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Shift Up
Indicator
*
●
Comes on briefly when you turn
the ignition switch to ON
(
w
*1
.
●
Comes on when shifting up is
recommended.
—
Shift Down
Indicator
*
●
Comes on briefly when you turn
the ignition switch to ON
(
w
*1
.
●
Comes on when shifting down is
recommended.
Washer Level
Indicator
*
●
Comes on when the washer fluid is
low.
●
Refill washer fluid.
2 Refilling Window Washer Fluid
P. 510
—
Maintenance
Minder
Indicator
*
●
Comes on when the scheduled
maintenance is due soon.
P. 491
—
Auto High-Beam
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when all the operating
conditions of the auto high-beam
are met.
—
* Not available on all models
88
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Road Departure
Mitigation
(RDM) Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with the RDM system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when the RDM system
shuts itself off.
●
Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the temperature
inside the camera cools down.
P. 431
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
P. 431
●
Comes on if anything covers the
radar sensor cover and prevents
the sensor from detecting a vehicle
in front.
●
May come on when driving in bad
weather (rain, snow, fog, etc.)
●
LKAS has been automatically
canceled.
●
When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator does not go off even after
you clean the sensor cover.
* Not available on all models
89
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Adaptive Cruise
Control (ACC)
Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with ACC.
●
Comes on while driving - Have your
vehicle checked by a dealer.
Adaptive Cruise
Control (ACC)
Indicator
(Green)
*
●
Comes on when you press the
MAIN button.
2 Adaptive Cruise Control (ACC)
P. 433
—
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with the LKAS.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(Green)
*
●
Comes on when you press the
MAIN button.
2 Lane Keeping Assist System (LKAS)
P. 452
—
* Not available on all models
90
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when you deactivate
the CMBS
TM
. A multi-information
display message appears for five
seconds.
●
Comes on if there is a problem
with the CMBS
TM
.
●
Stays on constantly without the
CMBS
TM
off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking
P. 472
●
Comes on when the CMBS
TM
system shuts itself off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
P. 431
●
When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
●
Have your vehicle checked by a dealer if
the message does not disappear even
after you clean the sensor cover.
2 Collision Mitigation Braking
P. 472
●
Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
P. 431
* Not available on all models
91
uu
Indicators
u
Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Information Display Warning and Information Messages
*
The following messages appear only on the information display.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 561
●
Appears when there is a problem with the sensor on
the battery.
●
Stays on constantly - Have your vehicle checked
by a dealer.
* Not available on all models
92
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Multi-Information Display Warning and Information Messages
*
The following messages appear only on the multi-information display. Press the
(information) button to see the message again
with the system message indicator on.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 561
●
Appears when the scheduled maintenance is due
soon.
u
Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2 Maintenance Minder Messages on the Multi-
●
Appears when the engine coolant temperature gets
abnormally high.
●
Appears while you are customizing the settings and
the shift lever is moved out of
(
P.
●
Appears while you are customizing the settings and
the parking brake is released.
Continuously variable transmission models
Manual transmission models
* Not available on all models
93
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the ignition key is turned to
ACCESSORY
(
q from ON
(
w. (The driver’s door is
closed.)
—
●
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(
q.
●
Turn the ignition switch to LOCK
(
0, then remove the
key.
●
Appears when you open the driver’s door while the
ignition key is in LOCK
(
0.
●
Remove the key from the ignition switch.
Message
Condition
Explanation
●
Appears after you unlock and open the driver’s door.
Models without smart entry system
Models with smart entry system
94
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing
the ENGINE START/STOP button.
●
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P.
●
Move the shift lever to
(
P. The power mode changes to
VEHICLE OFF.
●
Appears when the power mode is in ACCESSORY.
—
●
Appears when you set the power mode to ON while
driving.
2 Emergency Engine Stop P. 554
Models with smart entry system
U.S. manual
transmission models
Canadian models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст