Honda Ridgeline (2019 year). Manual — part 23
352
Features
Bluetooth® HandsFreeLink®
Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using
your vehicle’s audio system, without handling your cell phone.
Using HFL
(Pick-up) button: Press to go directly to the Phone screen or to answer an
incoming call.
(Hang-up/Back) button: Press to end a call or to cancel a command.
(Talk) button: Press to call a number with a stored voice tag.
(Phone) button: Press to go directly to the Phone screen.
Selector knob: Rotate
to select an item on the screen, then press
.
■
HFL Buttons
1
Place your phone where you can get good reception.
To use HFL, you need a Bluetooth-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:
•
U.S.: Visit automobiles.honda.com/handsfreelink/,
or call 1-888-528-7876.
•
Canada: For more information on smartphone
compatibility, call 1-888-528-7876.
Voice control tips
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphone.
•
Press and release the
button when you want to
call a number using a stored voice tag. Speak
clearly and naturally after a beep.
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
•
To change the volume level, use the audio system’s
volume knob or the remote audio controls on the
steering wheel.
State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.
Models with color audio system
Microphone
(Talk) Button
(Hang-up/Back) Button
(Pick-up) Button
Selector Knob
(Phone) Button
Volume up
Volume down
353
uu
Bluetooth® HandsFreeLink®
u
Using HFL
Features
The audio/information screen notifies you
when there is an incoming call.
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries can be called using voice commands while
the vehicle is in motion.
■
HFL Status Display
1
If you receive a call while using the audio system, the
system resumes its operation after ending the call.
Up to 20 speed dial entries can be stored. If there is
no entry in the system, Speed Dial is disabled.
Up to 20 call histories can be stored. If there is no call
history, Call History is disabled.
Bluetooth® Wireless Technology
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
HFL Mode
Battery Level Status
Signal Strength
Bluetooth Indicator
Appears when your
phone is connected
to HFL.
Roaming Status
Caller’s Name
■
Limitations for Manual Operation
1
The information that appears on the audio/
information screen varies between phone models.
You can change the system language.
2 Customized Features P. 318
354
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Features
HFL Menus
The power mode must be in ACCESSORY or ON to use the system.
1
To use HFL, you must first pair your Bluetooth-
compatible cell phone to the system while the vehicle
is parked.
Some functions are limited while driving.
or
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
*1 : Appears only when a phone is connected to HFL.
Phone
Speed Dial
*1
Add New
Select a phone number from the call history to
store as a speed dial number.
Call History
Phonebook
Select a phone number from the phonebook to
store as a speed dial number.
Phone Number
Enter a phone number to store as a speed dial
number.
Dialed Calls
Received Calls
Missed Calls
Phonebook
*1
Dial
*1
Call History
*1
Display the paired phone’s phonebook.
Enter a phone number to dial.
(Existing entry list)
355
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
*1 : Appears only when a phone is connected to HFL.
Redial the last number dialed in the phone’s history.
Add New Device
Connect a Phone
Connect an Audio Device
Bluetooth Setup
Phone Setup
Redial
*1
Pair a phone to the system.
Connect a phone to the system.
Change a pairing code.
Disconnect All Devices
Delete Device
Pass-key
Disconnect a paired device from the system.
Delete a previously paired device.
Connect a Bluetooth® Audio device to the
system.
356
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Features
*1 : Appears only when a phone is connected to HFL.
Call History
Phonebook
Phone Number
Speed Dial
*1
Select a phone number from the phonebook
to store as a speed dial number.
Select a phone number from the call history
to store as a speed dial number.
Create a voice tag for a speed dial number.
Change Speed Dial
Delete Speed Dial
Store Voice Tag
Enter a phone number to store as a speed dial
number.
Delete a previously stored speed dial number.
Change Voice Tag
Delete Voice Tag
Change a previously stored speed dial
number.
Change a voice tag for a speed dial number.
Delete a voice tag for a speed dial number.
Add New
Existing entry list
357
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
Fixed
Mobile Phone
System Clear
Ringtone
Select the ring tone stored in the connected
cell phone.
Name Priority
Number Priority
Caller ID Info
Prioritize the caller’s name as the caller ID.
Clear the system of all paired phones, phonebook entries,
and security codes.
Prioritize the caller’s phone number as the
caller ID.
Select the ring tone stored in HFL.
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
358
Features
■
To pair a cell phone (when there is no
phone paired to the system)
1. Press the
button or the
button.
2. Rotate
to
select
Yes, then press
.
3. Make sure your phone is in search or
discoverable mode, then press
.
u
HFL automatically searches for a
Bluetooth® device.
4. When your phone appears on the list, select
it by pressing
.
u
If your phone does not appear, select
Phone Not Found? and search for
Bluetooth® devices using your phone.
From your phone, select
HandsFreeLink.
5. The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
6. A notification appears on the screen if
pairing is successful.
■
Phone Setup
1
Your Bluetooth-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it is
connected to HFL.
•
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFL.
: The phone is compatible with Bluetooth® Audio.
359
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
■
To pair a cell phone (when a phone has
already been paired to the system)
1. Press the
button or the
button.
u
If a prompt appears asking to connect to
a phone, select No and proceed with
step 2.
2. Rotate
to select Phone Setup, then
press .
3. Rotate
to select Bluetooth Setup,
then press
.
4. Rotate
to select Add New Device,
then press
.
u
The screen changes to device list.
5. Rotate
to select Add New, then press
.
360
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Features
6. Make sure your phone is in search or
discoverable mode, then press
.
u
HFL automatically searches for a
Bluetooth® device.
7. When your phone appears on the list, select
it by pressing
.
u
If your phone does not appear, select
Phone Not Found? and search for
Bluetooth® devices using your phone.
From your phone, select
HandsFreeLink.
8. The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by a phone.
361
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
■
To change the currently paired phone
1. Press the
button or the
button.
2. Rotate
to select Phone Setup, then
press .
3. Rotate
to select Bluetooth Setup, then
press .
4. Rotate
to select Connect a Phone,
then press
.
u
The screen changes to a device list.
5. Rotate
to select a desired device name,
then press
.
u
HFL disconnects the connected phone
and starts searching for another paired
phone.
362
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Features
■
To change the pairing code setting
1. Press the
button or the
button.
2. Rotate
to
select
Phone Setup, then
press .
3. Rotate
to select Bluetooth Setup, then
press .
4. Rotate
to
select
Pass-Key, then press
.
5. Input a new pairing code, then press
.
363
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
■
To delete a paired phone
1. Press the
button or the
button.
2. Rotate
to select Phone Setup, then
press .
3. Rotate
to select Bluetooth Setup, then
press .
4. Rotate
to select Delete Device, then
press .
u
The screen changes to a device list.
5. Rotate
to select a phone you want to
delete, then press
.
6. A confirmation message appears on the
screen. Rotate
to select Yes, then press
.
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
364
Features
You can change the ring tone setting.
1. Press the
button or the
button.
2. Rotate
to
select
Phone Setup, then
press .
3. Rotate
to
select
Ringtone, then press
.
4. Rotate
to
select
Mobile Phone or
Fixed, then press
.
You can select a caller’s information to be displayed when you have an incoming
call.
1. Press the
button or the
button.
2. Rotate
to
select
Phone Setup, then
press .
3. Rotate
to
select
Caller ID Info, then
press .
4. Rotate
to select a mode you want, then
press .
■
Ring Tone
1
Fixed: The fixed ring tone sounds from the speakers.
Mobile Phone: Depending on the make and model
of the mobile phone, the ring tone stored in the
phone will sound if the phone is connected.
■
Caller’s ID Information
1
Name Priority: A caller’s name is displayed if it is
stored in the phonebook.
Number Priority: A caller’s phone number is
displayed.
365
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Continued
Features
All speed dial entries, all imported phonebook data, all call history data, paired
phones, pairing codes, caller’s ID settings, and volume settings are reset as default.
1. Press the
button or the
button.
2. Rotate
to select Phone Setup, then
press .
3. Rotate
to select System Clear, then
press .
4. Rotate
to select Yes, then press
.
5. A confirmation message appears on the
screen. Rotate
to select Yes, then press
.
6. A notification appears on the screen. Press
.
■
To Clear the System
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
366
Features
When your phone is paired, the contents of its phonebook and call history are
automatically imported to HFL.
■
Automatic Import of Cellular Phonebook and Call History
1
Automatic Import of Cellular Phonebook and Call History
When you select a name from the list in the cellular
phonebook, you can see up to three category icons.
The icons indicate what types of numbers are stored
for that name.
If a name has four or more numbers, ... appears
instead of category icons.
On some phones, it may not be possible to import the
category icons to HFL.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Pref
Home
Mobile
Pager
Work
Fax
Car
Voice
Other
Continued
367
uu
Bluetooth® HandsFreeLink®
u
HFL Menus
Features
Up to 20 speed dial numbers can be stored per phone.
To store a speed dial number:
1. Press the
button or the
button.
2. Rotate
to
select
Speed Dial, then press
.
3. Rotate
to select Add New, then press
.
4. Rotate
to select a place to choose a
number from, then press
.
From Call History:
u
Select a number from the call history.
From Phonebook:
u
Select a number from the connected cell
phone’s imported phonebook.
From Phone Number:
u
Input the number manually.
5. When the speed dial is successfully stored,
you are asked to create a voice tag for the
number. Rotate
to select Yes or No,
then press
.
6. Using the
button, follow the prompts to
say the name for the speed dial entry.
■
Speed Dial
1
When a voice tag is stored, you can press the
button and call the number using voice commands.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст