Harley Davidson 2013 Sportster Models. Electrical Diagnostics Manual — page 15

    HOME
    sm00051
    1
    2
    1
    2
    3
    4
    4
    1. Wire lead in metal insert
    2. Crimp metal insert
    3. Center of crimp
    4. Melted SEALANT
    Figure A-77. Sealed Splice Connector
    A-44 2013 Sportster Diagnostics: Appendix A Connector Repair
    TABLE OF CONTENTS
    SUBJECT
    PAGE NO.
    B.1 CONNECTORS
    B-1
    B.2 WIRING DIAGRAMS
    B-4
    NOTES
    HOME
    CONNECTORS
    B.1
    CONNECTOR LOCATIONS
    Connector Number
    On wiring diagrams and in service/repair instructions, con-
    Function/Location
    nectors are identified by a number in brackets.
    All vehicle connectors are identified by their function and loca-
    tion. Refer to Table B-1.
    Repair Instructions
    The repair instructions in Appendix A are by connector type.
    Place and Color
    Refer to Table B-1.
    The place (number of wire cavities of a connector housing)
    and color of the connector can also aid identification.
    Table B-1. Sportster Connector Locations
    NO.
    DESCRIPTION
    TYPE
    TERMINAL
    LOCATION
    PROBE
    COLOR
    [5]
    Main fuse
    2-place Delphi 800 Metripack
    Red
    Behind left side cover
    Sealed (BK)
    [7]
    Tail lamp harness to main har-
    6-place
    Tyco 070 Multilock
    Gray
    Below seat
    ness
    Unsealed (BK)
    [18]
    Right rear turn signal
    2-place
    Tyco 070 Multilock
    Gray
    Inside tail lamp lens (single stop
    Unsealed (single stop lamp)
    lamp)
    2-place Tyco 070 Multilock
    Under the seat (LED and dual stop
    Unsealed (W) (LED)
    lamp)
    4-place Tyco 070 Multilock
    Unsealed (BK) (dual stop lamp)
    [19]
    Left rear turn signal
    2-place
    Tyco 070 Multilock
    Gray
    Inside tail lamp lens (single stop
    Unsealed (BK) (single stop
    lamp)
    lamp)
    Under the seat (LED and dual stop
    2-place
    Tyco 070 Multilock
    lamp)
    Unsealed (BK) (LED)
    4-place Tyco 070 Multilock
    Unsealed (BK) (dual stop lamp)
    [20]
    Instruments
    12-place
    Molex MX 150 Sealed
    Gray
    Under fuel tank
    (BK)
    [22]
    Right hand controls
    6-place Molex MX 150 Sealed
    Gray
    Under fuel tank
    (BK)
    [24]
    Left hand controls
    8-place Molex MX 150 Sealed
    Gray
    Under fuel tank
    (GY)
    [30]
    TSM, TSSM or HFSM
    12-place Deutsch DT Sealed
    Breakout Box
    Under battery
    (GY)
    [31]
    Front turn signals
    6-place
    Tyco 070 Multilock
    Gray
    Under fuel tank
    Unsealed (BK)
    [38]
    Headlamp
    4-place
    Tyco 070 Multilock
    Gray
    Under fuel tank
    Unsealed (BK)
    [39]
    Speedometer (XL)
    12
    Delphi Micro 64 Sealed (BK)
    Breakout Box
    Back of speedometer
    [39]
    Speedometer (XR)
    5-place Delphi 150.2 Sealed
    Gray
    Back of speedometer
    (BK)
    [40]
    License plate lamp
    2-place
    Tyco 070 Multilock
    Gray
    Under seat
    Unsealed (BK)
    3-place Tyco 070 Multilock
    Unsealed (BK)
    [47]
    Voltage regulator to stator
    3-place Dekko (BK)
    Green
    Right side, under gear case cover
    [61]
    Fuse block
    T
    yco JR Power Timer Unsealed
    Gray
    Behind left side cover
    (BK)
    2013 Sportster Diagnostics: Appendix B Wiring B-1
    HOME
    Table B-1. Sportster Connector Locations
    NO.
    DESCRIPTION
    TYPE
    TERMINAL
    LOCATION
    PROBE
    COLOR
    [65]
    VSS
    3-place Delphi 150.2 Sealed
    Gray
    Behind starter
    (BK)
    [77]
    Voltage regulator
    2-place Dekko (BK)
    Green
    Left side frame, in front of oil filter
    [78]
    ECM (XL)
    36-place Delphi 100W Sealed
    Breakout Box
    Behind rear cylinder
    (GY)
    [78]
    ECM (XR)
    36-place Delphi 100W Sealed
    Breakout Box
    Under seat
    (GY)
    [79]
    CKP sensor
    2-place Deutsch DTM Sealed
    Brown
    Left side frame under oil filter
    (BK)
    [80]
    TMAP sensor
    4-place Bosch 1.1M sealed
    Purple
    Top of intake manifold
    (BK)
    [83]
    Ignition coil
    4-place Delphi GT 150 Sealed
    Gray
    Under fuel tank
    (BK)
    [84]
    Front fuel injector
    2-place
    Molex BPT Sealed (BK)
    Purple
    Top of induction manifold
    [85]
    Rear fuel injector
    2-place
    Molex BPT Sealed (BK)
    Purple
    Top of induction manifold
    [87]
    IAC
    4-place Delphi 150.2 sealed
    Gray
    Top of induction manifold
    (BK)
    [88]
    TPS
    3-place Delphi 150.2 Sealed
    Gray
    Behind air cleaner mounting plate
    (BK)
    [90]
    ET sensor
    2-place
    Tyco Superseal 1.5
    Gray
    On right side ECM caddy: XL models
    Sealed (BK)
    On right side H-bracket: XR 1200X
    [91]
    DLC
    4-place Deutsch DT Sealed
    Black
    Under left side cover
    (GY)
    [93]
    Tail/stop lamp
    4-place
    Tyco 070 Multilock
    Gray
    Inside tail lamp lens
    Unsealed (BK)
    [94]
    Rear turn signal lamp
    6-place
    Tyco 070 Multilock
    Gray
    Inside tail lamp lens
    Unsealed (BK)
    [108]
    Tachometer (XR)
    12-place Delphi Micro 64
    Breakout Box
    Back of tachometer
    Sealed (GY)
    [120]
    Oil pressure switch
    Right Angle Push On terminal
    Under oil filter mount
    (BK)
    [121]
    Rear stop lamp switch
    T
    yco Insulated Spade terminals
    Red
    Left side under battery (XL)
    (BK)
    Under rear fork (XR)
    [122]
    Horn
    Flag terminals (BK)
    Red
    Between front frame tubes or on the
    left side of engine
    [128]
    Starter solenoid
    1-place Delphi 56 Spade ter-
    Gray
    Right side bottom of starter
    minal (W)
    [131]
    Neutral switch
    Right Angle Push On Molded
    Black
    Right side under sprocket cover
    terminals (BK)
    behind transmission sprocket
    [133]
    JSS (HDI)
    3-place Molex MX 150 Sealed
    Gray
    Left side frame down tube
    (BK)
    [136]
    Neutral switch jumper
    1-place bullet (BK)
    Right side frame, beneath gearcase
    cover
    [137]
    Rear O2 sensor
    2-place
    Tyco 070 Multilock
    Gray
    On left side ECM caddy: XL models
    Unsealed (BK)
    On left side H-bracket: XR 1200X
    [138]
    Front O2 sensor
    2-place
    Tyco 070 Multilock
    Gray
    Left side frame in front of oil filter
    Unsealed (BK)
    B-2 2013 Sportster Diagnostics: Appendix B Wiring
    HOME
    Table B-1. Sportster Connector Locations
    NO.
    DESCRIPTION
    TYPE
    TERMINAL
    LOCATION
    PROBE
    COLOR
    [141]
    Fuel pump and low fuel switch
    4-place Molex MX 150 Sealed
    Gray
    On left side of ECM caddy: XL
    (BK)
    models
    On left side of H-bracket: XR 1200X
    [142]
    Security siren
    3-place Delphi 150.2 Sealed
    Gray
    Under frame
    (BK)
    [145]
    Engine sensor harness
    16-place
    Molex MX 150 Sealed
    Gray
    Under seat
    (BK)
    [160]
    P&A battery
    1-place Delphi 800 Metripack
    Purple
    Under seat
    Sealed (GY)
    [178]
    Active intake solenoid
    2-place
    Tyco Superseal 1.5
    Gray
    Right side behind air box: XR 1200X
    Sealed (BK)
    [200]
    Fuel sender resistor assembly
    3-place Molex MX 150 Sealed
    Gray
    Under seat
    (BK)
    [208]
    HFSM antenna harness
    4-place Deutsch DT Sealed
    Black
    Under battery
    (GY)
    [209]
    HFSM antenna
    2-place
    Molex MX 64 Unsealed
    Gray
    Under seat
    (BK)
    [210]
    Fuel
    Tank Ground (XR)
    1-place molded (BK)
    Under fuel tank cover
    [266]
    Anti-theft tracking module
    4-place Delphi GT 150 Sealed
    Gray
    Under frame
    (BK)
    [267]
    Anti-theft harness to main har-
    3-place Deutsch DT Sealed
    Black
    Under battery
    ness
    (BK)
    [Battery
    Battery ground
    Ring terminal (BK)
    Top of transmission case
    ground]
    [GND 1]
    Harness ground
    Ring terminal (BK)
    Left side behind starter
    2013 Sportster Diagnostics: Appendix B Wiring B-3
    HOME
    WIRING DIAGRAMS
    B.2
    WIRING DIAGRAM INFORMATION
    ed03175
    5
    Wire Color Codes
    Wire traces on wiring diagrams are labeled with alpha codes.
    3
    4
    Refer to Table B-2.
    6
    For Solid Color Wires: See Figure B-1. The alpha code
    identifies wire color.
    7
    1
    2
    For Striped Wires: The code is written with a slash (/) between
    the solid color code and the stripe code. For example, a trace
    8
    labeled GN/Y is a green wire with a yellow stripe.
    [21A]
    1
    2
    Wiring Diagram Symbols
    [21B]
    1
    2
    9
    See Figure B-1. On wiring diagrams and in service/repair
    instructions, connectors are identified by a number in brackets
    [ ]. The letter inside the brackets identifies whether the housing
    10
    1
    2
    is a socket or pin housing.
    A=Pin: The letter A and the pin symbol after a connector
    11
    13
    number identifies the pin side of the terminal connectors.
    B=Socket: The letter B and the socket symbol after a con-
    12
    nector number identifies the socket side of the terminal con-
    nectors. Other symbols found on the wiring diagrams include
    the following:
    1.
    Connector number
    2.
    Terminal code (A=pin, B=socket)
    Diode: The diode allows current flow in one direction only in
    3.
    Solid wire color
    a circuit.
    4.
    Striped wire color
    Wire break: The wire breaks are used
    to show option variances
    5.
    Socket symbol
    or page breaks.
    6.
    Pin symbol
    7.
    Diode
    No Connection: Two wires crossing over each other in a wiring
    8.
    Wire break
    diagram that are shown with no splice indicating they are not
    9.
    No connection
    connected together.
    10. Circuit to/from
    Circuit to/from: This symbol indicates a more complete circuit
    11. Splice
    diagram on another page. The symbol is also identifying the
    12. Ground
    direction of current flow.
    13. Twisted pair
    Splice: Splices are where two or more wires are connected
    Figure B-1. Connector/Wiring Diagram Symbols
    together along a wiring diagram. The indication of a splice only
    indicates that wires are spliced to that circuit. It is not the true
    location of the splice in the wiring harness.
    Ground: Grounds can be classified as either clean or dirty
    grounds. Clean grounds are identified by a (BK/GN) wire and
    are normally used for sensors or modules.
    NOTE
    Clean grounds usually do not have electric motors, coils or
    anything that may cause electrical interference on the ground
    circuit.
    Dirty grounds are identified by a (BK) wire and are used for
    components that are not as sensitive to electrical interference.
    Twisted pair: This symbol indicates the two wires are twisted
    together in the harness. This minimizes the circuit's electromag-
    netic interference from external sources. If repairs are neces-
    sary to these wires they should remain as twisted wires.
    B-4 2013 Sportster Diagnostics: Appendix B Wiring
    HOME
    ed01886
    Table B-2. Wire Color Codes
    ALPHA CODE
    WIRE COLOR
    BE
    Blue
    M
    0
    P
    R
    S
    U
    BK
    Black
    1
    2
    3
    4
    BN
    Brown
    G
    5
    H
    I
    J
    K
    L
    GN
    Green
    6
    7
    GY
    Gray
    A
    8
    B
    C
    D
    E
    F
    LGN
    Light Green
    O
    Orange
    PK
    Pink
    R
    Red
    1.
    [61B] Fuse block top view (located under left
    TN
    Tan
    side cover)
    2. ACCY fuse
    V
    Violet
    3. Battery fuse
    W
    White
    4. ECM fuse
    Y
    Yellow
    5. Lights fuse
    6. Start relay
    7. System relay
    8. Ignition fuse
    Figure B-2. Fuse Block and Socket Terminals
    2013 Sportster Diagnostics: Appendix B Wiring B-5
    HOME
    Refer to the table below for wiring diagram information.
    2013 SPORTSTER WIRING DIAGRAMS
    Wiring Diagram List
    DIAGRAM
    LOCATION
    Battery Power
    Figure B-3
    Ignition Power
    Figure B-4
    Accessory Power
    Figure B-5
    Chassis Grounds
    Figure B-6
    Main Harness:
    2013 Sportster
    Figure B-7
    Engine Management:
    2013 Sportster
    Figure B-8
    Starting and Charging Circuit:
    2013 Sportster
    Figure B-9
    Lighting (1 of 2):
    2013 Sportster
    Figure B-10
    Lighting (2 of 2):
    2013 Sportster
    Figure B-11
    Instrument, Indicators, and Hand Controls:
    2013 Sportster
    Figure B-12
    Security Circuit:
    2013 Sportster
    Figure B-13
    Security Circuit with Anti-Theft
    Tracking Module: 2013 Sportster
    Figure B-14
    B-6 2013 Sportster Diagnostics: Appendix B Wiring
    HOME
    em00958
    Main Fuse
    30A
    [5]
    Ignition Switch
    IGN
    OFF
    ACC
    A B
    [5B]
    B+
    ACC
    IGN
    Red
    Band
    BK
    R
    Starter
    Battery
    R
    R
    R
    1
    [160B]
    +
    [77B]
    [61B]
    +
    [77A]
    P
    S
    P&A
    Battery
    Battery
    ECM
    System
    Fuse
    Fuse
    87
    30
    85
    86
    Relay
    15A
    15A
    5
    3
    1
    2
    R
    U
    E L F K
    Voltage
    Regulator
    BN/GY
    BN/GY
    BE/GY
    2
    [20B]
    2
    [20A]
    XR
    XL
    1
    [30B]
    A
    [142B]
    31
    [78B]
    1
    [30A]
    A
    [142A]
    31
    [78A]
    TSM, TSSM
    Security
    ECM
    Siren
    (Optional)
    [39A]
    B
    5
    [108A]
    5
    [39A]
    [39B]
    B
    5
    [108B]
    5
    [39B]
    Speedometer Tachometer
    Speedometer
    Figure B-3. Battery Power
    2013 Sportster Diagnostics: Appendix B Wiring B-7
    HOME
    em01323
    Ignition Switch
    IGN
    OFF
    ACC
    B+
    ACC
    IGN
    Battery
    R
    Power
    [61B]
    G
    A
    Lights
    IGN
    Start
    Fuse
    Fuse
    87
    30
    85
    86
    Relay
    15A
    15A
    5
    3
    1
    2
    H
    B
    C J D I
    4
    3
    [31A]
    3
    [24B]
    4
    [91A]
    2
    [30B]
    3
    [22B]
    4
    3
    [31B]
    3
    [24A]
    2
    [30A]
    3
    [22A]
    DLC
    6
    [20B]
    Headlamp
    Left
    Right
    [20A]
    Hi/Lo
    6
    Turn
    Turn
    Low
    TSM,
    High
    Switch
    Lamp
    Lamp
    TSSM,
    HFSM
    Engine
    Stop
    Single Stop Lamp
    Dual Stop Lamps
    Switch
    XR
    Except
    XR
    XL
    XR
    3
    [7A]
    3
    [7A]
    3
    [7B]
    3
    [7B]
    Tail
    Lamp
    [108B]
    1
    [39B]
    1
    Converter
    Module
    [108A]
    1
    [39A]
    1
    3
    [94B]
    Indicators
    Indicators
    3
    [94A]
    [18A]
    3
    3
    [19A]
    Circuit
    Board
    [18B]
    3
    3
    [19B]
    Tachometer
    Speedometer
    1
    [93A]
    1
    [93B]
    Right
    Left
    Turn/
    Turn/
    Tail
    Tail
    Lamp
    Lamp
    Tail
    Lamp
    (DOM)
    Figure B-4. Ignition Power
    B-8 2013 Sportster Diagnostics: Appendix B Wiring
    HOME
    em01446
    Ignition Switch
    IGN
    OFF
    ACC
    B+
    ACC
    IGN
    Battery
    R
    Power
    [61B]
    M
    ACC
    Fuse
    15A
    O
    1
    [121B-B]
    1
    [24B]
    1
    [22B]
    1
    [20B]
    1
    [38A]
    1
    [121B-A]
    1
    [24A]
    1
    [22A]
    1
    [20A]
    1
    [38B]
    Rear
    Stop
    Left
    Right
    Position
    Lamp
    Turn
    Turn
    Lamp
    Switch
    Switch
    Switch
    (HDI)
    XR
    XL
    Single Stop Lamp
    Dual Stop Lamps
    XR
    Except
    XR
    1
    [7A]
    1
    [7A]
    [94B]
    1
    [94A]
    1
    1
    [7B]
    1
    [7B]
    [108B]
    6
    [39B]
    A
    [39B]
    6
    Circuit
    [108A]
    6
    [39A]
    A
    [39A]
    6
    Board
    Except
    XL1200C/CP/
    XL1200C/CP/
    [93A]
    2
    CA/CB
    CA/CB
    DOM
    HDI
    [93B]
    2
    T
    achometer
    Speedometer Speedometer
    [94B]
    1
    1
    [40A]
    Tail
    Lamp
    [94A]
    1
    1
    [40B]
    Tail
    (HDI)
    Lamp
    Circuit
    Converter
    Board
    Module
    [93A]
    2
    3
    [19B]
    1
    [40B]
    3
    [18B]
    [93B]
    2
    Tail
    3
    [19A]
    1
    [40A]
    3
    [18A]
    Lamp
    Tail
    Left
    License
    Right
    Lamp
    Tail
    Plate
    Tail
    (HDI)
    Lamp
    Lamp
    Lamp
    Figure B-5. Accessory Power
    2013 Sportster Diagnostics: Appendix B Wiring B-9
    HOME
    Fuel Pump
    em01447
    Security Siren
    Fuel Tank
    And Sender
    Horn
    (Optional)
    ECM
    (XR Only)
    Assembly
    Fuel Sender
    Resistor
    Assembly
    3
    [133A]
    1
    [200A]
    B
    [122A]
    C
    [142A]
    10
    28
    [78A]
    1
    [210A]
    4
    [141B]
    DLC
    3
    [133B]
    1
    [200B]
    B
    [122B]
    C
    [142B]
    10
    28
    [78B]
    1
    [210B]
    4
    [141A]
    2
    [91A]
    Speedometer
    Tachometer
    Speedometer
    Position Lamp
    BK
    (HDI)
    Indicators
    Indicators
    BK
    4
    4
    BK
    BK
    Headlamp
    [38A] [38B]
    [39A]
    D
    [108A]
    7
    7
    [39A]
    [39B]
    D
    [108B]
    7
    7
    [39B]
    BK
    1
    1
    BK
    4
    4
    Right Turn Signal
    BK
    6
    6
    BK
    4
    4
    Left Turn Signal
    [31A] [31B]
    [65A] [65B]
    VSS
    C
    C
    BK
    XR
    XL
    [30B] [30A]
    BK
    12
    12
    BK
    TSM, TSSM,
    BK
    12
    12
    [20A] [20B]
    HFSM
    BK
    8
    8
    BK
    Clutch
    Switch
    [24B] [24A]
    Voltage
    BK
    -
    -
    BK
    Regulator
    Left
    High
    Right
    Turn
    Beam
    Turn
    [77B] [77A]
    Indicator
    Indicator
    Indicator
    BK
    Single Stop Lamp
    Dual Stop Lamps
    XR
    Except
    XR
    GND 1
    Battery
    6
    [7A]
    6
    [7A]
    6
    [7B]
    6
    [7B]
    Battery
    Ground
    Except
    XL1200C/
    XL1200C/CP/CA/CB
    CP/CA/CB
    HDI
    DOM
    Tail Lamp
    Converter
    6
    [94B]
    6
    [94B]
    Module
    [19B] [19A]
    [19B] [19A]
    6
    [94A]
    6
    [94A]
    Left
    Left
    3
    [40A]
    Turn
    2
    2
    Turn
    2
    2
    Circuit
    Circuit
    Signal
    Signal
    3
    [40B]
    Right
    Board
    Right
    Board
    2
    2
    2
    2
    Turn
    Turn
    1
    [19B]
    2
    [40B]
    1
    [18B]
    Signal
    4
    [93A]
    Signal
    4
    [93A]
    1
    [19A]
    2
    [40A]
    1
    [18A]
    [18B] [18A]
    [18B] [18A]
    4
    [93B]
    4
    [93B]
    Tail
    Lamp
    Left
    License
    Right
    Tail
    Tail
    Turn/Stop
    Plate
    Turn/Stop
    Lamp
    Lamp
    Tail Lamp
    Lamp
    Tail Lamp
    Figure B-6. Chassis Grounds
    B-10 2013 Sportster Diagnostics: Appendix B Wiring
    et00474
    Fuel Pump
    Ignition
    Fuel Sender
    And Sender
    See Instruments,
    CKP
    See Instruments,
    See Lighting
    Resistor Assy
    ASSY
    Sensor
    Coil
    See Lighting
    Ignition
    Indicator Lamps,
    Indicator Lamps,
    (2 Of 2)
    (2
    Of 2)
    1
    2
    3
    [200B]
    1
    2
    34
    Switch
    IGN
    And Hand Controls
    And Hand Controls
    [141A]
    OFF
    ACC
    1
    2
    3
    4
    [38A]
    1
    2
    3
    4
    5
    6
    [31A]
    [20B]
    12 3 45
    6
    7
    8
    9 10
    12
    D
    C
    B
    A
    [83A]
    1
    2
    3
    4
    5
    6
    [22B]
    Security
    B+
    ACC
    IGN
    D
    C
    B
    A
    [83B]
    Siren
    2
    1
    [79A]
    (Optional)
    2
    1
    [79B]
    Lights 15A
    [142A]
    [142B]
    BE
    H
    G
    R/BK
    Power
    A
    A
    BN/GY
    ACCY 15A
    Signal
    B
    B
    LGN/BN
    O/W
    O
    M
    R/GY
    Ground
    C
    C
    BK
    Ignition 15A
    GY
    B
    A
    R/BK
    Battery 15A
    BN/GY
    R
    P
    R
    TSM, TSSM, HFSM
    [30A] [30B]
    ECM 15A
    Battery
    1
    1
    BN/GY
    BE/GY
    U
    S
    R
    Ignition
    2
    2
    GY
    Serial Data
    3
    3
    LGN/V
    Neutral Switch
    4
    4
    TN
    System Relay
    Left Turn Feed
    5
    5
    V
    Y/GN
    E
    5
    87
    Right Turn Feed
    6
    6
    BN
    Right Turn Switch Input
    7
    7
    W/BN
    BE/GY
    L
    3
    30
    P&A
    Left Turn Switch Input
    8
    8
    W/V
    Battery
    GN/O
    K
    1
    86
    Start Relay Control
    9
    9
    TN/GN
    W/BK
    F
    2
    85
    1
    Clutch Switch
    10
    10
    BK/R
    R
    Alarm Signal
    11
    11
    LGN/BN
    Ground
    12
    12
    BK
    [160B]
    Start Relay
    Receive Antenna
    1
    1
    Y/BK
    GN
    C
    5
    87
    XMIT Antenna A
    2
    2
    O/Y
    Main Fuse
    XMIT Antenna B
    3
    3
    BK
    R/BK
    J
    3
    30
    30A
    TN/GN
    I
    1
    86
    BK/R
    D
    2
    85
    HFSM Only
    [208A]
    [208B]
    [61B]
    [5B]
    Hands Free Antenna
    B A
    1
    1
    Antenna ’A’
    2
    2
    Antenna ’B’
    [209B]
    [209A]
    System Relay
    2
    2
    GN/O
    Serial Data
    5
    5
    LGN/V
    BK/PK
    1
    ET
    6
    6
    PK/Y
    BK/O
    2
    IAT
    7
    7
    LGN/Y
    BK/W
    3
    O2 Sensor (A)
    8
    8
    PK/O
    BN/R
    4
    JSS (HDI)
    9
    9
    GN/BN
    R/W
    5
    Ground
    10
    10
    BK
    GY/O
    6
    See
    See
    Coil Rear
    11
    11
    Y/BE
    CKP Sensor (-)
    12
    12
    BK
    Y/GN
    7
    Engine
    Starting
    GN/GY
    8
    Switched Power
    13
    13
    W/BK
    Management
    And
    5V Sensor power
    14
    14
    R/W
    BE/GN
    9
    Charging
    V/W
    11
    BK
    Circuit
    Battery
    IAC (A) Hi
    17
    17
    BK/O
    GY/V
    12
    13
    Ground
    IAC (B) Low
    18
    18
    BK/PK
    W/Y
    GND 1
    LGN/Y
    14
    Injector Rear
    19
    19
    GN/GY
    AIS (XR-HDI Only)
    20
    20
    GY/O
    Injector Front
    21
    21
    W/Y
    [145A]
    BK
    O2 Sensor (B)
    23
    23
    PK/GN
    TPS Input
    24
    24
    GY/V
    TMAP Sensor Input
    25
    25
    V/W
    Fuel
    [128A] [128B]
    5V Sensor Ground
    26
    26
    BK/W
    Tank
    Red
    GN
    Ground
    28
    28
    BK
    BK
    1
    1
    Coil Front
    29
    29
    BE/O
    Band
    [136B]
    CKP Sensor (+)
    30
    30
    R
    [133B]
    Battery
    Battery
    31
    31
    BE/GY
    [24B]
    [121B]
    [136A]
    [210B] [210A]
    1
    2
    3
    [137B]
    1
    2
    [138B]
    21
    1
    2
    3
    4
    5
    6
    78
    Starter
    VSS Input
    33
    33
    BK/BE
    1
    2
    3
    [121A]
    (XR)
    [137A]
    1
    2
    [138A]
    2
    1
    [90B]
    2 1
    See Instruments,
    [131B]
    [133A]
    B
    A
    [120B]
    IAC (A) Low
    35
    35
    BE/GN
    Indicator Lamps,
    [90A]
    2 1
    [131A]
    IAC (B) Hi
    36
    36
    BN/R
    And Hand Controls
    [120A]
    ECM
    See Lighting
    [78A] [78B]
    B A
    [122B]
    (2 Of 2)
    Rear
    Oil
    To
    Neutral
    C
    C
    BK
    Stop Lamp
    Pressure
    Horn
    Switch
    VSS
    B
    B
    BK/BE
    Switch
    Sending
    A
    A
    BK/R
    Rear
    Front
    ET
    Unit
    O2
    O2
    Sensor
    JSS
    [91A]
    Sensor
    Sensor
    DLC
    1
    2
    3
    4
    (HDI)
    [65A] [65B]
    Figure B-7. Main Harness: 2013 Sportster
    Figure B-7.
    Figure B-7.
    Main Harness:
    2013 Sportster
    Main Harness: 2013 Sportster
    et00475
    CKP
    AIS
    See Instruments,
    Sensor
    (XR, HDI
    See Instruments,
    Ignition Switch
    Indicator Lamps,
    Ignition
    Fuel Pump
    Only)
    Indicator Lamps,
    Rear
    Front
    Fuel Sender
    And Sender
    And Hand Controls
    Coil
    And Hand Controls
    D C B A
    Injector
    Injector
    Resistor ASSY
    ASSY
    IGN
    [20B]
    2
    6 7
    10
    12
    [83A]
    OFF
    4 3
    [22B]
    ACC
    12 3
    [200B]
    1 2 3 4
    [141A]
    D C B A
    [83B]
    [84A]
    B+
    ACC
    IGN
    2
    1
    [79A]
    [85A]
    A B
    A B
    2
    1
    [79B]
    2
    1
    [178A]
    A B
    [85B]
    A B
    2
    1
    [178B]
    [84B]
    Ignition
    15A
    Main Fuse
    GY
    B
    A
    R/BK
    30A
    TSM, TSSM, HFSM
    [30A] [30B]
    Battery
    1
    1
    BN/GY
    Battery 15A
    Ignition
    2
    2
    GY
    BN/GY
    R
    P
    R
    [5B]
    Serial Data
    3
    3
    LGN/V
    B A
    Ground
    12
    12
    BK
    ECM 15A
    BE/GY
    U
    S
    R
    Receive Antenna
    1
    1
    XMIT Antenna A
    2
    2
    XMIT Antenna B
    3
    3
    System Relay
    HFSM Only
    [208A]
    Y/GN
    E
    5
    87
    BE/GY
    L
    3
    30
    GN/O
    K
    1
    86
    W/BK
    F
    2
    85
    [61B]
    ECM
    System Relay
    2
    2
    GN/O
    Serial Data
    5
    5
    LGN/V
    BK
    ET Sensor
    6
    6
    PK/Y
    BK/PK
    1
    1
    BK/PK
    IAT
    7
    7
    LGN/Y
    BK/O
    2
    2
    BK/O
    O2 Sensor (A)
    8
    8
    PK/O
    BK/W
    3
    3
    BK/W
    BN/R
    4
    4
    BN/R
    JSS (HDI)
    9
    9
    GN/BN
    R/W
    5
    5
    R/W
    Ground
    10
    10
    BK
    Battery
    GY/O
    6
    6
    GY/O
    Coil Rear
    11
    11
    Y/BE
    Ground
    Y/GN
    7
    7
    Y/GN
    CKP (-)
    12
    12
    BK
    GN/GY
    8
    8
    GN/GY
    Switched Power
    13
    13
    W/BK
    BE/GN
    9
    9
    BE/GN
    5V Sensor Power
    14
    14
    R/W
    V/W
    11
    11
    V/W
    Battery
    IAC (A) Hi
    17
    17
    BK/O
    GY/V
    12
    12
    GY/V
    BK
    IAC (B) Low
    18
    18
    BK/PK
    W/Y
    13
    13
    W/Y
    LGN/Y
    14
    14
    LGN/Y
    Injector Rear
    19
    19
    GN/GY
    GND 1
    AIS (XR Only)
    20
    20
    GY/O
    Injector Front
    21
    21
    W/Y
    [145A] [145B]
    O2 sensor (B)
    23
    23
    PK/GN
    TPS Input
    24
    24
    GY/V
    TMAP Sensor Input
    25
    25
    V/W
    Engine
    5V Sensor Ground
    26
    26
    BK/W
    Fuel
    Harness
    BK
    1
    1
    Tank
    Ground
    28
    28
    BK
    Coil Front
    29
    29
    BE/O
    CKP Sensor (+)
    30
    30
    R
    [210B] [210A]
    Battery
    31
    31
    BE/GY
    (XR)
    [137B]
    1
    2
    [138B]
    2
    1
    VSS Input
    33
    33
    DCB A
    [87B]
    1
    2
    3
    4
    [80B]
    A B C
    [88B]
    [137A]
    1
    2
    [138A]
    2
    1
    2
    1
    [90B]
    IAC (A) Low
    35
    35
    BE/GN
    DCB A
    [87A]
    1
    2
    3
    4
    [80A]
    A B C
    [88A]
    IAC (B) Hi
    36
    36
    BN/R
    [133B]
    1
    2
    3
    2
    1
    [90A]
    [133A]
    1
    2
    3
    [78A] [78B]
    IAC
    TPS
    2
    BK
    Rear
    Front
    ET
    TMAP
    DLC
    3
    LGN/V
    O2
    O2
    Sensor
    4
    GY
    Sensor
    Sensor
    [91A]
    JSS
    (HDI)
    Figure B-8. Engine Management: 2013 Sportster
    Figure B-8.
    Figure B-8.
    Engine Management:
    2013 Sportster
    Engine Management: 2013 Sportster
    et00545
    Right Hand
    Controls
    Battery
    Ground
    Engine Stop Switch
    BK
    Start Switch
    Red
    Band
    BK
    Ignition Switch
    Main Fuse
    30A
    Battery
    IGN
    OFF
    Battery
    ACC
    Ground
    B+
    ACC
    IGN
    [5B]
    6
    4
    3
    [22A]
    BK
    B A
    6
    3
    [22B]
    [128A] [128B]
    Battery
    BK
    Ignition 15A
    GY
    B
    A
    R/BK
    GN
    Stator
    Battery 15A
    Starter
    BN/GY
    R
    P
    R
    Main Fuse
    30A
    Start Relay
    GN
    C
    5
    87
    [5B]
    R/BK
    J
    3
    30
    TN/GN
    I
    1
    86
    B
    A
    BK/R
    D
    2
    85
    [61B]
    Voltage
    Regulator
    [47B]
    1
    2
    [47A]
    1
    2
    R
    +
    +
    BK
    TSM, TSSM, HFSM
    BK
    BK
    BK
    [30A] [30B]
    -
    -
    GND 1
    [77B] [77A]
    Battery
    1
    1
    BN/GY
    Ignition
    2
    2
    GY
    Neutral Switch
    4
    4
    TN
    Start Relay Control
    9
    9
    Clutch Switch
    10
    10
    BK/R
    Chassis Ground
    12
    12
    BK
    TN/GN
    C
    [267B]
    C
    [267A]
    Receive Antenna
    1
    XMIT Antenna A
    2
    GN
    XMIT Antenna B
    3
    [24B]
    7
    8
    4
    [24A]
    7
    8
    BK
    D
    C
    [266B]
    HFSM Only
    [208A]
    GND 1
    D
    C
    [266A]
    Clutch Switch
    Anti-Theft
    Tracking
    [136B]
    Module
    (If Equipped)
    [136A]
    Charging
    [131B]
    [131A]
    Left Hand
    Controls
    Neutral
    Switch
    Starting
    Figure B-9. Starting and Charging Circuit: 2013 Sportster
    Figure B-9.
    Figure B-9.
    Starting and Charging Circuit:
    2013 Sportster
    Starting and Charging Circuit: 2013 Sportster
    et00477
    Right Hand
    Controls
    Right Turn Switch
    See Lighting
    (2 Of 2)
    See Instruments,
    [31A]
    Ignition Switch
    Front Stop Lamp Switch
    6 5 4 3 2 1
    Indicator Lamps, And
    Hand Controls
    IGN
    1 2 3 4 5 7 12
    [20B]
    OFFACC
    5 2
    1
    [22A]
    B+
    ACC
    IGN
    5 2
    1
    [22B]
    TSM, TSSM, HFSM
    [30A] [30B]
    Main Fuse
    Battery
    1
    1
    BN/GY
    30A
    Ignition
    2
    2
    GY
    Serial Data
    3
    3
    LGN/V
    Left Turn Feed
    5
    5
    V
    Right Turn Feed
    6
    6
    BN
    [5B]
    Right Turn Switch Input
    7
    7
    W/BN
    Left Turn Switch Input
    8
    8
    W/V
    B A
    Ground
    12
    12
    BK
    [61B]
    Ignition
    15A
    Receive Antenna
    1
    1
    GY
    B
    A
    R/BK
    XMIT Antenna A
    2
    2
    XMIT Antenna B
    3
    3
    4
    4
    Lights
    15A
    BE
    H
    G
    R/BK
    HFSM Only
    [208A] [208B]
    ACCY 15A
    O/W
    O
    M
    R/GY
    Battery 15A
    BN/GY
    R
    P
    R
    Serial Data
    5
    5
    LGN/V
    Ground
    10
    10
    BK
    Ground
    28
    28
    BK
    ECM
    [78A] [78B]
    Battery
    Ground
    Battery
    [121B]
    GND 1
    [24B]
    12 3 4 5
    [121A]
    [38A]
    1 2 3 4
    B
    A
    [24A]
    12 3 4 5
    See Lighting
    See Lighting
    (2 Of 2)
    (2 Of 2)
    Rear
    Stop Lamp
    Switch
    Headlamp Hi/Lo Switch
    Left Turn Switch
    Left Hand
    Controls
    Figure B-10. Lighting (1 of 2): 2013 Sportster

    Была ли эта страница вам полезна?
    Да!Нет
    2 посетителя считают эту страницу полезной.
    Большое спасибо!
    Ваше мнение очень важно для нас.

    Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

    Текст

    Матвей Александрович29.05.2024 02:46
    Политика конфиденциальности