LEXUS NX 300H (2019 year). Manual — part 5
76
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
cate that a system check is being per-
formed. They will turn off after the
hybrid system is on, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate a malfunc-
tion.
*4
: This light illuminates on the center
panel.
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING
■
If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS airbag warning light not
come on when you start the hybrid sys-
tem, this could mean that these systems
are not available to help protect you in an
accident, which could result in death or
serious injury. Have the vehicle inspected
by your Lexus dealer immediately if this
occurs.
Indicators
Turn signal indicator (
(U.S.A.)
Headlight indicator (
(Canada)
Tail light indicator (
Headlight high beam indicator
(
Automatic High Beam indica-
tor (
Fog light indicator (
“READY” indicator (
EV indicator (
EV drive mode indicator
*2
(
“Eco” indicator
*2
(
“Sport” indicator
*2
(
Dynamic radar cruise control
indicator
*2
(
Cruise control “SET” indica-
tor
*2
(
Cruise control indicator
*2
(
(White)
LDA indicator
*2
(
77
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
*1
: These lights turn on when the power
switch is turned to the ON mode to
indicate that a system check is being
performed. They will turn off after the
hybrid system is on, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate that the sys-
tem is operating.
*4
: The light comes on when the system is
turned off.
*5
: When the outside temperature is
approximately 37°F (3°C) or lower, the
indicator will flash for approximately 10
seconds, then stay on.
*6
: In order to confirm operation, the BSM
outside rear view mirror indicators illu-
minate in the following situations:
When the power switch is turned to
ON mode while the BSM main switch is
set to ON.
When the BSM main switch is set to
ON while the power switch is in ON
mode.
If the system is functioning correctly, the
BSM outside rear view mirror indica-
tors will turn off after a few seconds.
If the BSM outside rear view mirror indi-
cators do not illuminate or do not turn
off, there may be a malfunction in the
system.
If this occurs, have the vehicle inspected
(Green)
LDA indicator
*2
(
(Orange)
LDA indicator
*2, 3
(
(if equipped)
Intuitive parking assist indica-
tor (
(if equipped)
PKSB OFF indicator
*1, 4
(
Slip indicator light
*1, 3
(
VSC off indicator
*1, 4
(
PCS warning light
*1, 4
(
(U.S.A.)
Parking brake indicator
(
(Canada)
Parking brake indicator
(
Brake hold standby indicator
*1
(
Brake hold operated indica-
tor
*1
(
Low outside temperature indi-
cator
*2, 5
(
P.79)
(if equipped)
BSM outside rear view mirror
indicators
*6, 7
(
Security indicator
*8
(
(U.S.A.)
“AIR BAG ON/OFF” indi-
cator
*8
(
(Canada)
“AIR BAG ON/OFF” indi-
cator
*8
(
78
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
by your Lexus dealer.
*7
: This light illuminates on the outside rear
view mirrors.
*8
: This light illuminates on the center
panel.
79
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
When driving mode is in other than Sport mode (
The units used on the meters may differ depending on the target region.
Engine coolant temperature gauge
Displays the engine coolant temperature
Hybrid System Indicator
Displays hybrid system output or regeneration level (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low
outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or
lower.
Background color of driving mode
Background color changes according to the driving mode. (
• Sport mode: Red
• Eco mode: Blue
When in Normal mode, the background color is black.
Clock
Time displayed is linked to the analog clock on the instrument panel. (
Multi-information display
Presents the driver with a variety of vehicle data (
Gauges and meters
The meters display various drive information.
Meter display
A
B
C
D
E
F
80
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
Displays warning messages in case of a malfunction (
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Shift position and shift range
Displays the selected shift position or selected shift range (
Odometer, trip meter and maintenance required information display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset.
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently.
Maintenance required information:
Displays the remaining distance until the engine oil should be changed.
• Displays the maintenance required information when the power switch is ON mode.
• It can be reset on
of the multi-information display. (
)
When driving mode is in Sport mode (
The units used on the meters may differ depending on the target region.
Engine coolant temperature gauge
Displays the engine coolant temperature
Tachometer
Displays the engine speed in revolutions per minute
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low
G
H
I
J
A
B
C
81
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or
lower.
Background color of driving mode
Background color changes according to the driving mode. (
• Sport mode: Red
• Eco mode: Blue
When in Normal mode, the background color is black.
Clock
Time displayed is linked to the analog clock on the instrument panel. (
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages in case of a malfunction (
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Shift position and shift range
Displays the selected shift position or selected shift range (
Odometer, trip meter and maintenance required information display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset.
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently.
Maintenance required information:
Displays the remaining distance until the engine oil should be changed.
• Displays the maintenance required information when the power switch is ON mode.
• It can be reset on
of the multi-information display. (
P.86
D
E
F
G
H
I
J
82
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
■
Operating condition
The power switch is in ON mode.
■
Hybrid System Indicator
Power area
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
Eco area
Shows that the vehicle is being driven in
an Eco-friendly manner.
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Charge area
Shows that energy is being recovered
via the regenerative brake.
●
Hybrid System Indicator is displayed
when the driving mode is in other than
the Sport mode.
●
By keeping the indicator needle within
Eco area, more Eco-friendly driving can
be achieved.
●
Charge area indicates regeneration
*
sta-
tus. Regenerated energy will be used to
charge the hybrid battery (traction bat-
tery).
*
: When used in this manual, “regeneration”
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
■
Tachometer
Hybrid System Indicator switches to the
tachometer when driving mode is in Sport
mode. The settings of the tachometer dis-
play can be changed on the multi-informa-
tion display.
■
Engine speed
On hybrid vehicles, engine speed is pre-
cisely controlled in order to help improve
fuel efficiency and reduce exhaust emis-
sions, etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
■
Outside temperature display
●
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system
may be malfunctioning.
Take your vehicle to your Lexus dealer.
■
Pop-up display
In some situations, a pop-up display will be
temporarily displayed on the multi-informa-
tion display or the odometer/trip meter/
maintenance required information screen.
The pop-up display function can be set on/
off. (
P.87)
■
Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
A
B
C
D
83
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Customization
The meter display can be customized on
the multi-information display.
(Customizable features:
Switches between odometer, trip
meter and maintenance required infor-
mation displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness. At this time,
any adjustments made to the instrument
panel brightness levels will be applied to
both settings at once.
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
personal death or injury.
NOTICE
■
To prevent damage to the engine and
its components
●
When the tachometer is displayed, do
not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Cool-
ant Temp High” or “Hybrid System
Overheated” is shown on the multi-
information display. In this case, imme-
diately stop the vehicle in a safe place,
and check the engine or hybrid system
after it has cooled completely.
(
Changing between the odome-
ter, trip meter and maintenance
required information
Changing the Instrument panel
light brightness
84
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
■
Display
■
Menu icons
■
Liquid crystal display
The multi-information display is oper-
ated using the meter control switches.
Select an item/change pages
Enter/set
Return to the previous screen
Press:
Displays the screen registered to
When no screen has been regis-
tered, the drive information screen
will be displayed.
Press and hold:
Registers the currently displayed
screen to
The registration confirmation screen is dis-
played. If the selected screen cannot be
registered, a registration failure message
will be shown.
Multi-information display
The multi-information display pres-
ents the driver with a variety of
vehicle data.
Display and menu icons
Drive information (
Navigation system-linked dis-
play (if equipped) (
Audio system-linked display (if
equipped) (
Driving assist system informa-
tion (
Warning message display
(
Settings display (
P.86)
NOTICE
■
The multi-information display at low
temperatures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
Changing the meter display
A
B
C
D
85
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Content displayed as drive infor-
mation
Select to display various drive data.
Items displayed can be switched by
pressing
or
of the meter con-
trol switches to select
and pressing
or
.
Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
Average fuel consumption (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the hybrid sys-
tem was started, and the vehicle was refu-
eled, respectively
Use the displayed average fuel consump-
tion as a reference.
Average vehicle speed (after
reset
*2
/after start)
*1
Displays the average vehicle speed since
the function was reset and the hybrid sys-
tem was started, respectively
Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
tion was reset and the hybrid system was
started, respectively
Distance (driving range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
hybrid system was started respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the power switch
off. If the vehicle is refueled without turn-
ing the power switch off, the display may
not be updated.
*1
: Displayed when the item is set in “Drive
Info 1”, “Drive Info 2” and “Drive Info 3”.
*2
: The function can be reset by pressing
the
of the meter control switches
for longer than 1 second when the item
to reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
■
Energy monitor
■
Speedometer
Displays the vehicle speed.
■
Tire inflation pressure
Displays inflation pressure of each tire.
The inflation pressure of the spare tire will
not be displayed.
■
Vehicle sway warning
Detects the sway of the vehicle within a
lane, which is often associated with a
decrease in the driver’s attention level,
and displays the decrease in attention
using a bar display.
The shorter the bar length, the more
the driver may need to rest.
This display is a part of the LDA (Lane
Departure Alert with steering control)
system. The display is enabled when
Drive information
86
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
the operating conditions of the vehicle
sway warning are met. (
■
Display off
A blank screen is displayed.
■
Tire inflation pressure
●
It may take a few minutes to display the
tire inflation pressure after the power
switch is turned to ON mode. It may also
take a few minutes to display the tire infla-
tion pressure after inflation pressure has
been adjusted.
●
“---” may be displayed if the tire informa-
tion cannot be determined due to unfa-
vorable radio wave conditions.
●
Tire inflation pressure changes with tem-
perature. The displayed values may also
be different from the values measured
using a tire pressure gauge.
■
When disconnecting and reconnecting
12-volt battery terminals
The drive information will be reset.
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display (heading-up dis-
play)
Select to enable selection of an audio
source or track on the display using the
meter control switches.
Select to display the operational status
of the following systems:
LDA (Lane Departure Alert with
steering control) (
Dynamic radar cruise control with
full-speed range (
The displayed icon changes depending
on the system used.
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
The settings of the following items can
be changed using the meter control
switches.
For functions that can be enabled or
disabled, the function switches
between on and off each time
is
pressed.
■
LDA (Lane Departure Alert
with steering control) (
Select to set up the following items.
Steering Assist
Select to enable/disable steering wheel
assistance.
Alert
Select to set a vibrator or buzzer as the
notification method used to warn the
driver.
Alert sensitivity
Select to set the warning sensitivity.
Sway warning
Select to enable/disable the vehicle sway
Navigation system-linked dis-
play (if equipped)
Audio system-linked display
Driving assist system information
Warning message display
Settings display
87
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
warning.
Sway sensitivity
Select to set the vehicle sway warning sen-
sitivity.
■
PCS (Pre-Collision System)
(
Select to set up the following items.
PCS on/off
Select to enable/disable the pre-collision
system.
PCS sensitivity
Select to change the warning timing.
■
PKSA (Parking Support Alert) (if
equipped) (
Select to set up the following items.
Intuitive parking assist sensor
Select to enable/disable the intuitive park-
ing assist sensor.
Volume
Select to set the volume of the buzzer
which sounds when the parking support
alert is operated.
■
PKSB (Parking Support
Brake System) (if equipped)
(
PKSB on/off
Select to enable/disable the parking sup-
port brake function (for static objects).
■
Clock
Select to switch between 12-hour dis-
play and 24-hour display.
■
Vehicle Settings
PBD (Power Back Door)
(
*1
Select to set up the following items.
• System settings
Select to enable/disable the power back
door system.
• Volume
Select to set the volume of the buzzer
which sounds when the power back door
system.
• Kick Sensor
*2
Select to enable/disable the kick sensor.
*1
: Vehicles with power back door
*2
: Vehicles with hands free power back
door
TPMS (Tire Pressure Warning Sys-
tem) (
Select to initialize the tire pressure warning
system.
Scheduled Maintenance (
Select to initialize the scheduled mainte-
nance.
Oil maintenance (
Select to reset the engine oil maintenance
information (message indicating mainte-
nance is required and distance until the
next oil change) after engine oil mainte-
nance is performed.
■
Meter settings
Language
Select to change the language on the dis-
play.
Units
Select to change the unit of measure for
fuel consumption.
EV Indicator (
Select to set the EV indicator on/off.
Switch settings (
88
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
Displays a procedure to register a desired
screen to
.
You can register 1 screen as a shortcut,
which can be displayed by pressing
.
Drive information screen (
Select to choose between 2 items that will
be displayed on each drive information
screen (“
Drive info 1”, “Drive info 2” and
“Drive info 3
”) respectively.
Pop-up display (
Select to set the following pop-up displays,
which may appear in some situations, on/
off.
• Intersection guidance display of the nav-
igation system-linked system
• Incoming call display of the hands-free
phone system
• Instrument panel brightness adjustment
display
Accent color
Select to change the accent colors on the
screen, such as the cursor color.
Tachometer settings
Select to set the display of the tachometer
or Hybrid System Indicator to automati-
cally change according to the driving
mode or static.
Initialization
Select to reset the meter display settings.
■
Suspension of the settings display
In the following situations, the settings dis-
play using the meter control switches will be
suspended.
●
When a warning message appears on the
multi-information display
●
When the vehicle begins to move
Automatically displayed when the sys-
tem is used. (
WARNING
■
Cautions during setting up the dis-
play
As the hybrid system needs to be operat-
ing during setting up the display, ensure
that the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases includ-
ing harmful carbon monoxide (CO) may
collect and enter the vehicle. This may
lead to death or a serious health hazard.
NOTICE
■
During setting up the display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while setting up the display features.
Intuitive parking assist (if
equipped)
89
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
*
: If equipped
Head-up display
Display brightness will change automati-
cally according to the brightness of the sur-
rounding area.
Display position adjustment switch
Display brightness adjustment
switch
Display brightness can be adjusted to the
desired level.
“HUD” button
“DISP” button
Vehicle speed
Hybrid System Indicator (
Tachometer
Shift position and shift range
Displays the selected shift position or
selected shift range (
Audio display
Displays audio information for approxi-
mately 3 seconds when the audio system is
operated
Route guidance display (vehicles
with navigation system) (
When approaching an intersection while
the navigation system is giving route guid-
ance, an arrow will automatically be dis-
played to indicate the direction of travel.
Lane departure warning display
(LDA [Lane Departure Alert with
steering control]) (
Approach warning display
(Dynamic radar cruise control with
full speed range) (
Pre-collision warning message (Pre-
Collision System) (
Speed limit display (vehicles with
navigation system) (
Parking Support Brake (for static
objects) (
■
“HUD” button
Pressing the button turns the head-up
display on/off and changes the vehicle
speed display units as follows:
Head-up display
*
The head-up display can be used to
project vehicle speed and other
information onto the windshield.
System components
A
B
C
D
E
Head-up display contents
Switching the head-up display
90
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
U.S.A.
OFF
ON (MPH)ON (km/
h)
OFF
Canada
OFF
ON (km/h)ON
(MPH)
OFF
■
“DISP” button
Pressing the button changes the dis-
play items (except vehicle speed) as
follows:
• Off
• Hybrid System Indicator
• Tachometer
■
Head-up display
●
The head-up display may seem dark and
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up display
or remove your sunglasses.
●
When the head-up display is turned off, it
will not display anything until it is turned
on again.
A
WARNING
■
Before using the head-up display
Check that the position and brightness of
the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s view
and lead to an accident, resulting in
death or serious injury.
■
Caution for changing settings of the
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
■
To prevent damage to components
●
Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
●
Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
91
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_M78287_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Adjusting the display position
1
Higher
2
Lower
■
Setting the brightness
The brightness of the display is auto-
matically adjusted in accordance with
the brightness of the surrounding envi-
ronment. However, the brightness can
also be manually adjusted in 9 stages.
1
Brighter
2
Darker
Charge area
Shows regenerative charging.
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving,
etc.)
NOTICE
●
Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
■
When changing the settings of the
head-up display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while changing the settings of the
head-up display.
Making the display easier to see
Hybrid System Indicator
A
B
C
D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст