Lexus ES300 (1997 year). Service manual — part 216
BO0A3–01
BE3367
2 – 2.5 mm
(0.028 – 0.030 in.)
0.7 – 0.75 mm
(0.079 – 0.098 in.)
BO–46
–
BODY
FRONT WIPER AND WASHER
1224
1997 LEXUS ES300 (RM511U)
ADJUSTMENT
ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the
direction of the nozzle hole to adjust the point where washer
fluid strikes the windshield.
BO0A4–01
N14274
A
A
–
BODY
FRONT WIPER AND WASHER
BO–47
1225
1997 LEXUS ES300 (RM511U)
INSTALLATION
1.
INSTALL WIPER MOTOR AND LINK ASSEMBLY
(a)
Install the wiper motor and link assembly.
(b)
Connect the connector.
(c)
Install and torque the 5 bolts.
Torque: 7.0 N·m (71 kgf·cm, 62 in.·lbf)
2.
INSTALL COWL TOP VENTILATOR LOUVER
3.
INSTALL WIPER ARM AND BLADE ASSEMBLY
(a)
Install the wiper arms and blades, and operate the wipers
once and turn the wiper switch OFF.
(b)
Adjust the wiper arms to the positions shown in the il-
lustration.
A: Approx. 25 mm (0.98 in.)
(c)
Torque the nuts.
Torque: 24 N·m (245 kgf·cm, 18 ft·lbf)
BO0A5–01
N02247
Front Fender Outside Moulding
Front Door Outside Moulding
Rear Door Outside
Moulding
Quarter Outside
Moulding
BO–48
–
BODY
BODY OUTSIDE MOULDING
1226
1997 LEXUS ES300 (RM511U)
BODY OUTSIDE MOULDING
COMPONENTS
BO0A6–01
N21439
: 2 Clips
Adhesive Tape
N02159
N21441
: 4 Clips
Adhesive Tape
N21787
: 2 Clips
Adhesive Tape
–
BODY
BODY OUTSIDE MOULDING
BO–49
1227
1997 LEXUS ES300 (RM511U)
REMOVAL
1.
REMOVE FRONT FENDER MOULDING
(a)
Remove the 2 screws.
(b)
Using a heat light, heat the moulding to 40 – 60
°
C (104
– 140
°
F).
NOTICE:
Do not heat the moulding excessively.
(c)
Cut the adhesive tape with a knife.
NOTICE:
If reusing the moulding, take care not damage the
moulding.
Do not damage the body.
(d)
Remove the moulding.
2.
REMOVE FRONT DOOR OUTSIDE MOULDING
(a)
Remove the 2 hole plugs and 2 nuts.
(b)
Using a heat light, heat the moulding to 40 – 60
°
C (104
– 140
°
F).
NOTICE:
Do not heat the moulding excessively.
(c)
Cut the adhesive tape with a knife.
NOTICE:
If reusing the moulding, take care not to damage the
moulding.
Do not damage the body.
(d)
Remove the moulding.
3.
REMOVE REAR DOOR OUTSIDE MOULDING
Remove the rear door outside moulding in the same way as the
front fender moulding.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст