LEXUS IS 300 (2019 year). Manual — part 7
104
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
■
PCS (Pre-collision system) (
The following pre-collision system settings can be changed:
■
AFS (Adaptive Front-lighting System) (if equipped) (
Item
Settings
Details
PCS
On
Select to enable/disable the pre-colli-
sion system.
Off
Warning sensitivity
Select to change the warning timing.
Item
Settings
Details
AFS
On
Select to enable/disable the AFS
(Adaptive Front-lighting System).
Off
105
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Speed indicator (F SPORT models) (
The following speed indicator settings can be changed:
*
: Always observe the legal speed limit when driving on public roads.
■
Clock (on multi-information display) (
Vehicles with a navigation system
The following clock setting can be changed:
Vehicles with a Lexus Display Audio system
The following clock settings can be changed:
Press the
/
switch to select an item and then press the
/
switch to
change the setting or adjust the time.
Item
Settings
Details
Speed Indicator
On
Select to enable/disable the speed
indicator.
Off
Speed Setting
30 mph to 100 mph
(50 km/h to 160
km/h)
*
Select to set the desired vehicle
speed at which the speed indicator
will begin to be displayed.
Item
Settings
Details
Display mode
12-hour display
Select to set the display mode of the
clock.
24-hour display
Item
Settings
Details
Display mode
12-hour display
Select to set the display mode of the
clock.
24-hour display
Adjust time
Select to adjust the hour/minute.
106
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Vehicle settings
■
Meter settings
Item
Settings
Details
Scheduled maintenance
Maintenance data reset
Select to reset the message indicating
maintenance is required, after the
required maintenance is performed.
(
Oil maintenance
Engine oil maintenance data reset
Select to reset the engine oil mainte-
nance information (message indicat-
ing maintenance is required and
distance until the next oil change)
after engine oil maintenance is per-
formed. (
Item
Settings
Details
Language
Select to change the language dis-
played.
Units
Select to change the units of measure
displayed.
(Eco Driving
Indicator Light)
On
Select to enable/disable the Eco Driv-
ing Indicator Light. (
Off
Switch settings (except F SPORT mod-
els)
Select to display how to change the
top screen.
Drive information 1
Select to select up to 2 items that will
be displayed on each Drive informa-
tion screen (Drive information 1
screen, Drive information 2 screen,
and Drive information 3 screen)
respectively.
(Selectable items:
Drive information 2
Drive information 3
107
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
Pop-up display
Intersection guid-
ance (if equipped)
Select to enable/disable the pop-up
display.
Incoming calls
Brightness adjust-
ment
Color (except F
SPORT models)
2 available colors
Select to set the color of the cursor on
the multi-information display.
Needle (F SPORT
models)
3 available colors
Select to set the tachometer needle
color.
Rev indicator (F
SPORT models)
On
Select to enable/disable the Rev indi-
cator. (
Off
Rev setting
Select to set the desired engine speed
at which the Rev indicator will begin
to be displayed.
Selectable engine speed range:
IS350 AWD/IS350/IS300 AWD:
2000 rpm to 6800 rpm
IS300: 2000 rpm to 6100 rpm
Rev peak (F SPORT
models)
On
Select to enable/disable the Rev peak.
(
Off
Default setting
Select to reset the meter display set-
tings to the default setting.
Item
Settings
Details
108
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
◆
Display items
■
Odometer
Displays the total distance the vehicle has been driven.
■
Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters A and B can be used to record and display different dis-
tances independently.
To reset, display the desired trip meter and press and hold the odometer/trip meter
and trip meter reset button.
■
Distance until next engine oil change
Displays the distance the vehicle can be driven until an oil change is neces-
sary.
◆
Pop-up display
In some situations the following will be temporarily displayed:
■
Distance until next engine oil change
Displays the distance until the next engine oil change. This display will be dis-
played in the following situations:
• When the engine switch is turned to IGNITION ON mode.
• When a warning message indicating that oil maintenance should be performed
soon or is required is displayed.
Odometer/trip meter display area
109
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
●
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
■
Background color of the indicator/shift position display area (except F SPORT models)
The background color of the indicator/shift position display area is changed according to
the driving mode as follows (
●
Eco drive mode: Blue
●
Sport mode: Red
■
G-force display (if equipped)
The G-force values may not be zero even when the vehicle is parked, such as when it is
parked on an incline.
■
Suspension of the settings display
●
Some settings cannot be changed while driving. When changing settings, park the
vehicle in a safe place.
●
If a warning message is displayed, operation of the settings display will be suspended.
■
Tire pressure
●
It may take a few minutes to display the tire inflation pressure after the engine switch is
turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been adjusted.
●
“---” may be displayed if the tire position information cannot be determined due to
unfavorable radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may also be dif-
ferent from the values measured using a tire pressure gauge.
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will turn
on. When the acceleration exceeds the Zone
of Eco driving, or when the vehicle is stopped,
the light turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current
Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco
driving, the right side of the Eco Driving Indi-
cator Zone Display will illuminate.
Zone of Eco driving
1
2
3
4
110
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic
of liquid crystal displays, and there is no problem continuing to use the display.
■
Customization
Some functions can be customized. (
WARNING
■
Caution for use while driving
●
When operating the multi-information display while driving, pay extra attention to the
safety of the area around the vehicle.
●
Do not look continuously at the multi-information display while driving as you may fail
to see pedestrians, objects on the road, etc. ahead of the vehicle.
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information
display. At extremely low temperatures, the information display monitor may respond
slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, causing
rapid and excessive engine braking and possibly an accident resulting in death or
injury.
■
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the vehicle
is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■
While setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the dis-
play features.
111
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
Audio system screen
“MENU” button
Lexus Display Audio controller
Remote Touch knob
“ENTER” button
*
1
: Vehicles with a Lexus Display Audio sys-
tem
*
2
: Vehicles with a navigation system
Fuel consumption information
Fuel consumption information can be displayed on the audio system.
Vehicles with a navigation system (10.3-inch display): The fuel consumption
information can be displayed and operated on the side display.
*
1
*
2
1
2
3
4
5
112
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
Lexus Display Audio screen
Press the “MENU” button on the Lexus Display Audio controller, then select
“Info” on the “Menu” screen, and then select “Fuel Consumption”.
If the “Trip Information” screen does not appear, move the controller to the right and
select “Trip Information”.
Fuel consumption in the past 15 min-
utes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine was
started.
Cruising range (
Navigation system screen
Press the “MENU” button on the Remote Touch, then select
on the “Menu”
screen, and then select “Fuel Consumption”.
If the “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption data
Fuel consumption in the past 15 min-
utes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine was
started.
Cruising range (
Average fuel consumption for the past 15 minutes is divided by color into past
averages and averages attained since the engine switch was last turned to IGNI-
TION ON mode. Use the displayed average fuel consumption as a reference.
The image is an example only.
Trip information
1
2
3
4
5
1
2
3
4
5
6
113
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
Lexus Display Audio screen
Press the “MENU” button on the Lexus Display Audio controller, then select
“Info” on the “Menu” screen, and then select “Fuel Consumption”.
If the “Past Record” screen does not appear, move the controller to the right and
select “Past Record”.
Previous fuel consumption record
Current fuel consumption
Best recorded fuel consumption
Navigation system screen
Press the “MENU” button on the Remote Touch, then select
on the “Menu”
screen, and then select “Fuel Consumption”.
If the “Trip Information” screen is displayed, select “Past Record”.
Resetting the past record data
Best recorded fuel consumption
Average fuel consumption
Previous fuel consumption record
Updating the average fuel con-
sumption data
The average fuel consumption history is divided by color into past averages and
the average fuel consumption since the last updated. Use the displayed average
fuel consumption as a reference.
The image is an example only.
Past record
1
2
3
1
2
3
4
5
114
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Updating the past record data
Vehicles with a Lexus Display Audio system
Update the average fuel consumption by moving the controller to the left and select
“Update” to measure the current fuel consumption again.
Vehicles with a navigation system
Update the average fuel consumption by selecting “Update” to measure the current fuel
consumption again.
■
Resetting the data
Vehicles with a Lexus Display Audio system
The fuel consumption data can be deleted by moving the controller to the left and select
“Clear”.
Vehicles with a navigation system
The fuel consumption data can be deleted by selecting “Clear”.
■
Cruising range
Displays the estimated maximum distance that can be driven with the quantity of fuel
remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
115
2. Instrument cluster
2
Instrument cl
uste
r
IS350 AWD/IS350/IS300 AWD/IS300_U
Vehicle information can be displayed on the side display (
P. 416), then select
“<” or “>” to select the desired screen.
Fuel consumption
Displays the average fuel consumption
for the past 10 minutes in 1 minute inter-
vals, as well as the cruising range.
Past record
Displays the average fuel consumption
and highest fuel consumption.
Trip information
Displays the cruising range, average
fuel consumption and the amount of
time elapsed since the engine was
started.
The image is an example only, and may vary slightly from actual conditions.
Using the side display (vehicles with a navigation system [10.3-inch dis-
play])
116
2. Instrument cluster
IS350 AWD/IS350/IS300 AWD/IS300_U
117
Operation of
each component
3
IS350 AWD/IS350/IS300 AWD/IS300_U
Keys. . . . . . . . . . . . . 118
Doors . . . . . . . . . . . . 124
Trunk . . . . . . . . . . . . 130
Smart access system with
push-button start. . . . . .. 135
Front seats. . . . . . . . . .. 143
Rear seats. . . . . . . . . ... 145
Driving position memory. . ..147
Head restraints . . . . . . . 152
Steering wheel . . . . . . . . 155
Inside rear view mirror . . . ..157
Outside rear view mirrors. ... 159
Power windows . . . . . . . 162
Moon roof. . . . . . . . . .. 166
118
IS350 AWD/IS350/IS300 AWD/IS300_U
3-1. Key information
The following keys are provided with the vehicle.
Electronic keys
• Operating the smart access system
with push-button start (
• Operating the wireless remote con-
trol function
Mechanical keys
Key number plate
Card key (electronic key) (if
equipped)
Operating the smart access system with
push-button start (
Locks the doors (
Unlocks the doors (
Opens the windows and moon roof
*
(
Opens the trunk (
Sounds the alarm (
*
: This setting must be customized at your
Lexus dealer.
Keys
The keys
1
2
3
4
Wireless remote control
1
2
3
4
5
119
3-1. Key information
3
Op
era
tio
n of
ea
ch
co
m
po
ne
nt
IS350 AWD/IS350/IS300 AWD/IS300_U
To take out the mechanical key, push
the release button and take the key out.
The mechanical key can only be
inserted in one direction, as the key only
has grooves on one side. If the key can-
not be inserted in a lock cylinder, turn it
over and re-attempt to insert it.
After using the mechanical key, store it
in the electronic key. Carry the mechan-
ical key together with the electronic key.
If the electronic key battery is depleted
or the entry function does not operate
properly, you will need the mechanical
key. (
Using the mechanical key
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст