LEXUS NX 300 (2019 year). Manual — part 4
60
1-2. Theft deterrent system
LEXUS NX300 Owners Manu-
al_USA_M78285_en
■
Items to check before locking the
vehicle
To prevent unexpected triggering of
the alarm and vehicle theft, make sure
of the following:
Nobody is in the vehicle.
The windows and moon roof (if
equipped) are closed before the
alarm is set.
No valuables or other personal
items are left in the vehicle.
■
Setting
Close the doors and hood, and lock all
the doors. The system will be set auto-
matically after 30 seconds.
The indicator light changes from being on
to flashing when the system is set.
■
Canceling or stopping
Do one of the following to deactivate
or stop the alarms:
Unlock the doors.
Turn the engine switch to ACCES-
SORY or IGNITION ON mode, or
start the engine. (The alarm will be
deactivated or stopped after a few
seconds.)
■
System maintenance
The vehicle has a maintenance-free type
alarm system.
■
Triggering of the alarm
The alarm may be triggered in the following
situations:
(Stopping the alarm deactivates the alarm
system.)
●
A person inside the vehicle opens a door
or hood, or unlocks the vehicle using an
inside lock button.
●
The battery is recharged or replaced
when the vehicle is locked. (
Alarm
The alarm uses light and sound to
give an alert when an intrusion is
detected.
The alarm is triggered in the follow-
ing situations when the alarm is set:
A locked door is unlocked or
opened in any way other than
using the entry function, wireless
remote control or mechanical
key. (The doors will lock again
automatically.)
The hood is opened.
Setting/canceling/stopping the
alarm system
61
1-2. Theft deterrent system
LEXUS NX300 Owners Manu-
al_USA_M78285_en
1
For safety and security
■
Alarm-operated door lock
In the following cases, depending on the sit-
uation, the door may automatically lock to
prevent improper entry into the vehicle:
●
When a person remaining in the vehicle
unlocks the door and the alarm is acti-
vated.
●
While the alarm is activated, a person
remaining in the vehicle unlocks the door.
●
When recharging or replacing the bat-
tery.
NOTICE
■
To ensure the system operates cor-
rectly
Do not modify or remove the system. If
modified or removed, the proper opera-
tion of the system cannot be guaranteed.
62
1-2. Theft deterrent system
LEXUS NX300 Owners Manu-
al_USA_M78285_en
63
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Vehicle status information
and indicators
2-1. Instrument cluster
Warning lights and indicators.
Gauges and meters . . . . .
Multi-information display. . ...
Head-up display . . . . . . ...
Fuel consumption information
64
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2-1.Instrument cluster
For the purpose of explanation, the following illustration displays all warning lights
and indicators illuminated.
The units used on the meters and some indicators may differ depending on the target
region.
Warning lights and indicators
The warning lights and indicators inform the driver of the status of the vehicle’s
various systems.
Instrument cluster
65
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Warning lights inform the driver of mal-
functions in any of the vehicle’s sys-
tems.
*1
: These lights turn on when the engine
switch is turned to IGNITION ON
mode to indicate that a system check is
being performed. They will turn off after
Warning lights
(U.S.A.)
Brake system warning light
*1
(
(Red)
(Canada)
Brake system warning light
*1
(
Charging system warning
light
*2
(
Low engine oil pressure warn-
ing light
*2
(
High coolant temperature
warning light
*2
(
(Yellow)
Brake system warning light
*1
(
(U.S.A.)
Malfunction indicator lamp
*1
(
(Canada)
Malfunction indicator lamp
*1
(
SRS warning light
*1
(
(U.S.A.)
ABS warning light
*1
(
(Canada)
ABS warning light
*1
(
(Yellow)
Electric power steering sys-
tem warning light
*1
(
(Red)
Electric power steering sys-
tem warning light
*1
(
PCS warning light
*1
(
(Orange)
LDA indicator
*2
(
(if equipped)
PKSB OFF indicator
*1, 3
(
Slip indicator light
*1
(
Brake hold operated indica-
tor
*1, 3
(
(U.S.A.)
Parking brake indicator
*3
(
(Canada)
Parking brake indicator
*3
(
Low fuel level warning light
(
Driver’s and front passenger’s
seat belt reminder light
(
Rear passengers’ seat belt
reminder light
*4
(
Master warning light
*1
(
Tire pressure warning light
*1
(
Brake Override System/
Drive-Start Control warning
light
*2
(
66
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
the engine is started, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate a malfunc-
tion.
*4
: This light illuminates on the center
panel.
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING
■
If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS airbag warning light not
come on when you start the engine, this
could mean that these systems are not
available to help protect you in an acci-
dent, which could result in death or seri-
ous injury. Have the vehicle inspected by
your Lexus dealer immediately if this
occurs.
Indicators
Turn signal indicator (
(U.S.A.)
Headlight indicator (
(Canada)
Tail light indicator (
Headlight high beam indicator
(
Automatic High Beam indica-
tor (
Fog light indicator (
Eco Driving Indicator Light
*1
(
“Eco” indicator
*2
(
“Sport” indicator
*2
(
(if equipped)
“Sport S” indicator
*2
(
(if equipped)
“Sport S+” indicator
*2
(
(if equipped)
“Custom” indicator
*2
(
Dynamic radar cruise control
indicator
*2
(
Cruise control “SET” indica-
tor
*2
(
67
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
*1
: These lights turn on when the engine
switch is turned to the IGNITION ON
mode to indicate that a system check is
being performed. They will turn off after
the engine is started, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate that the sys-
tem is operating.
*4
: The light comes on when the system is
turned off.
*5
: When the outside temperature is
approximately 37°F (3°C) or lower, the
indicator will flash for approximately 10
seconds, then stay on.
*6
: In order to confirm operation, the BSM
outside rear view mirror indicators illu-
minate in the following situations:
When the engine switch is turned to
IGNITION ON mode while the BSM
main switch is set to ON.
When the BSM main switch is set to
ON while the engine switch is in IGNI-
TION ON mode.
If the system is functioning correctly, the
BSM outside rear view mirror indica-
Cruise control indicator
*2
(
(White)
LDA indicator
*2
(
(Green)
LDA indicator
*2
(
(Orange)
LDA indicator
*2, 3
(
(if equipped)
Intuitive parking assist indica-
tor (
(if equipped)
PKSB OFF indicator
*1, 4
(
Slip indicator light
*1, 3
(
VSC off indicator
*1, 4
(
PCS warning light
*1, 4
(
(AWD mod-
els only)
All-wheel drive lock indicator
*1
(
(U.S.A.)
Parking brake indicator
(
(Canada)
Parking brake indicator
(
Brake hold standby indicator
*1
(
Brake hold operated indica-
tor
*1
(
Low outside temperature indi-
cator
*2, 5
(
(if equipped)
BSM outside rear view mirror
indicators
*6, 7
(
Security indicator
*8
(
(U.S.A.)
“AIR BAG ON/OFF” indi-
cator
*8
(
(Canada)
“AIR BAG ON/OFF” indi-
cator
*8
(
68
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
tors will turn off after a few seconds.
If the BSM outside rear view mirror indi-
cators do not illuminate or do not turn
off, there may be a malfunction in the
system.
If this occurs, have the vehicle inspected
by your Lexus dealer.
*7
: This light illuminates on the outside rear
view mirrors.
*8
: This light illuminates on the center
panel.
■
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
When this happens, the Eco Driving
Indicator Light will turn off.
Zone of Eco driving
Eco Driving Indicator will not operate
under the following conditions:
●
The shift lever is in any position other than
D.
●
A paddle shift switch is operated.
●
Neither Normal mode nor Eco mode is
selected. (
●
The vehicle speed is approximately 80
mph (130 km/h) or higher.
Settings of the display and non-display of
the Eco Driving Indicator Light can be
changed. (
A
B
C
D
69
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
The units used on the meters and some indicators may differ depending on the target
region.
Engine coolant temperature gauge
Displays the engine coolant temperature
Tachometer
Displays the engine speed in revolution per minute
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low
outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or
lower.
Background color of driving mode
Background color changes according to the driving mode. (
• Sport mode: Red
• Eco mode: Blue
When in Normal mode/Custom mode, the background color is black.
Clock
Time displayed is linked to the analog clock on the instrument panel. (
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages in case of a malfunction (
Gauges and meters
The meters display various drive information.
Meter display
A
B
C
D
E
F
70
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Shift position and shift range
Displays the selected shift position or selected shift range (
Odometer, trip meter and maintenance required information display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset.
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently.
Maintenance required information:
Displays the remaining distance until the engine oil should be changed.
• Displays the maintenance required information when the engine switch is in IGNITION
ON mode.
• It can be reset on
of the multi-information display. (
)
■
Operating condition
The engine switch is in IGNITION ON
mode.
■
Outside temperature display
●
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system
may be malfunctioning.
Take your vehicle to your Lexus dealer.
■
Pop-up display
In some situations, a pop-up display will be
temporarily displayed on the multi-informa-
tion display or the odometer/trip meter/
maintenance required information screen.
The pop-up display function can be set on/
off. (
■
Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■
Customization
The meter display can be customized on
the multi-information display.
(Customizable features:
G
H
I
J
71
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Switches between odometer, trip
meter and maintenance required infor-
mation displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness. At this time,
any adjustments made to the instrument
panel brightness levels will be applied to
both settings at once.
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
personal death or injury.
NOTICE
■
To prevent damage to the engine and
its components
●
Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Cool-
ant Temp High” is shown on the multi-
information display. In this case, imme-
diately stop the vehicle in a safe place,
and check the engine after it has
cooled completely. (
Changing between the odome-
ter, trip meter and maintenance
required information
Changing the Instrument panel
light brightness
72
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
■
Display
■
Menu icons
■
Liquid crystal display
The multi-information display is oper-
ated using the meter control switches.
Select an item/change pages
Enter/set
Return to the previous screen
Press:
Displays the screen registered to
When no screen has been regis-
tered, the drive information screen
will be displayed.
Press and hold:
Registers the currently displayed
screen to
The registration confirmation screen is dis-
played. If the selected screen cannot be
registered, a registration failure message
will be shown.
Multi-information display
The multi-information display pres-
ents the driver with a variety of
vehicle data.
Display and menu icons
Drive information (
Navigation system-linked dis-
play (if equipped) (
Audio system-linked display (if
equipped) (
Driving assist system informa-
tion (
Warning message display
(
Settings display (
NOTICE
■
The multi-information display at low
temperatures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
Changing the meter display
A
B
C
D
73
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Content displayed as drive infor-
mation
Select to display various drive data.
Items displayed can be switched by
pressing
or
of the meter con-
trol switches to select
and pressing
or
.
Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
Average fuel consumption (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the engine
was started, and the vehicle was refueled,
respectively
Use the displayed average fuel consump-
tion as a reference.
Average vehicle speed (after
reset
*2
/after start)
*1
Displays the average vehicle speed since
the function was reset and the engine was
started, respectively
Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
tion was reset and the engine was started,
respectively
Distance (driving range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine was started respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without turn-
ing the engine switch off, the display may
not be updated.
*1
: Displayed when the item is set in “Drive
Info 1”, “Drive Info 2” and “Drive Info 3”.
*2
: The function can be reset by pressing
the
of the meter control switches
for longer than 1 second when the item
to reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
■
Eco Driving Indicator Zone Dis-
play
■
Boost Meter/Oil Temperature
Gauge/Oil Pressure Gauge (if
equipped)
Boost Meter:
Displays the boost pressure. The dis-
play changes colors when the specified
pressure is exceeded.
Oil Temperature Gauge:
Displays the temperature of the engine
oil. The display flashes when the engine
oil exceeds 284°F (140°C).
Oil Pressure Gauge:
Displays the oil pressure for the engine
interior. A buzzer sounds and warning
message is displayed when the oil
pressure gets low. (
Drive information
74
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
Depending on the road conditions, tem-
perature, vehicle speed, etc., the actual
vehicle condition on the display screen
may differ.
Use the display screen as a reference.
■
G monitor (if equipped)
Displays the acceleration forces of the
front, back, left and right of the vehicle.
Also displays the turning angle of the
steering wheel, brake oil pressure,
accelerator opening.
The actual vehicle conditions may
differ from those on the display
screen, depending on the road con-
ditions, outside temperature, vehicle
speed, etc. Use the display screen
as a reference.
If a battery terminal is disconnected
and reconnected, the steering
amount display may be disabled
temporarily. After driving the vehi-
cle for a while, the display will be
enabled.
■
Speedometer
Displays the vehicle speed.
■
Tire inflation pressure
Displays inflation pressure of each tire.
The inflation pressure of the spare tire will
not be displayed.
■
Vehicle sway warning
Detects the sway of the vehicle within a
lane, which is often associated with a
decrease in the driver’s attention level,
and displays the decrease in attention
using a bar display.
The shorter the bar length, the more
the driver may need to rest.
This display is a part of the LDA (Lane
Departure Alert with steering control)
system. The display is enabled when
the operating conditions of the vehicle
sway warning are met. (
■
Display off
A blank screen is displayed.
■
Tire inflation pressure
●
It may take a few minutes to display the
tire inflation pressure after the engine
switch is turned to IGNITION ON mode.
It may also take a few minutes to display
the tire inflation pressure after inflation
pressure has been adjusted.
●
“---” may be displayed if the tire informa-
tion cannot be determined due to unfa-
vorable radio wave conditions.
●
Tire inflation pressure changes with tem-
perature. The displayed values may also
be different from the values measured
using a tire pressure gauge.
■
When disconnecting and reconnecting
battery terminals
The drive information will be reset.
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display (heading-up dis-
play)
Select to enable selection of an audio
source or track on the display using the
meter control switches.
Navigation system-linked dis-
play (if equipped)
Audio system-linked display
75
2-1. Instrument cluster
LEXUS NX300 Owners Manu-
al_USA_M78285_en
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Select to display the operational status
of the following systems:
LDA (Lane Departure Alert with
steering control) (
Dynamic radar cruise control with
full-speed range (
The displayed icon changes depending
on the system used.
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
The settings of the following items can
be changed using the meter control
switches.
For functions that can be enabled or
disabled, the function switches
between on and off each time
is
pressed.
■
LDA (Lane Departure Alert
with steering control) (
Select to set up the following items.
Steering Assist
Select to enable/disable steering wheel
assistance.
Alert
Select to set a vibrator or buzzer as the
notification method used to warn the
driver.
Alert sensitivity
Select to set the warning sensitivity.
Sway warning
Select to enable/disable the vehicle sway
warning.
Sway sensitivity
Select to set the vehicle sway warning sen-
sitivity.
■
PCS (Pre-Collision System)
(
Select to set up the following items.
PCS on/off
Select to enable/disable the pre-collision
system.
PCS sensitivity
Select to change the warning timing.
■
PKSA (Parking Support Alert) (if
equipped) (
Select to set up the following items.
Intuitive parking assist sensor
Select to enable/disable the intuitive park-
ing assist sensor.
Volume
Select to set the volume of the buzzer
which sounds when the parking support
alert is operated.
■
PKSB (Parking Support
Brake System) (if equipped)
(
PKSB on/off
Select to enable/disable the parking sup-
port brake function (for static objects).
■
Clock
Select to switch between 12-hour dis-
play and 24-hour display.
Driving assist system information
Warning message display
Settings display
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст