LEXUS NX 300 (2019 year). Manual — part 8
124
3-4. Adjusting the steering wheel and mirrors
LEXUS NX300 Owners Manu-
al_USA_M78285_en
To sound the horn, press on or close to
the
mark.
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
Type A
Changing automatic anti-glare func-
tion mode on/off
WARNING
■
Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury.
■
After adjusting the steering wheel
(manual type)
Make sure that the steering wheel is
securely locked.
Otherwise, the steering wheel may move
suddenly, possibly causing an accident,
resulting in death or serious injury.
Sounding the horn
Inside rear view mirror
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
WARNING
■
Caution while driving
Do not adjust the position of the mirror
while driving.
Doing so may lead to mishandling of the
vehicle and cause an accident, resulting
in death or serious injury.
Anti-glare function
125
3-4. Adjusting the steering wheel and mirrors
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3
Be
fore
dri
ving
When the automatic anti-glare function is
in ON mode, the indicator
illuminates.
The function will set to ON mode each
time the engine switch is turned to IGNI-
TION ON mode.
Pressing the button turns the function to
OFF mode. (The indicator
also turns
off.)
Type B
Changing automatic anti-glare func-
tion mode on/off
When the automatic anti-glare function is
in ON mode, the indicator
illuminates.
The function will set to ON mode each
time the engine switch is turned to IGNI-
TION ON mode.
Pressing the button turns the function to
OFF mode. (The indicator
also turns
off.)
■
To prevent sensor error
To ensure that the sensors operate properly,
do not touch or cover them.
Type A
Type B
A
A
A
A
126
3-4. Adjusting the steering wheel and mirrors
LEXUS NX300 Owners Manu-
al_USA_M78285_en
1
To select a mirror to adjust, press
the switch.
Left
Right
2
To adjust the mirror, press the
switch.
Up
Right
Down
Left
■
Mirror angle can be adjusted when
The engine switch is in ACCESSORY or
IGNITION ON mode.
■
Defogging the mirrors
The outside rear view mirrors can be
cleared using the mirror defoggers. Turn on
the rear window defogger to turn on the
outside rear view mirror defoggers.
(
■
Auto anti-glare function
When the anti-glare inside rear view mirror
is set to automatic mode, the outside rear
view mirrors will activate in conjunction with
the anti-glare inside rear view mirror to
reduce reflected light. (
■
Automatic adjustment of the mirror
angle (vehicles with driving position
memory)
A desired mirror face angle can be entered
to memory and recalled automatically by
the driving position memory. (
■
Linked mirror function when reversing
(vehicles with driving position memory)
When the mirror select switch is in the “L”
or “R” position, the outside rear view mir-
rors will automatically angle downwards
when the vehicle is reversing in order to
Outside rear view mirrors
For safe driving, adjust the mirror
angles to secure visibility before
driving.
WARNING
■
When driving the vehicle
Observe the following precautions while
driving.
Failing to do so may result in loss of con-
trol of the vehicle and cause an accident,
resulting in death or serious injury.
●
Do not adjust the mirrors while driving.
●
Do not drive with the mirrors folded.
●
Both the driver and passenger side
mirrors must be extended and prop-
erly adjusted before driving.
■
When the mirror defoggers are oper-
ating
Do not touch the rear view mirror sur-
faces, as they can become very hot and
burn you.
Adjustment procedure
A
B
A
B
C
D
127
3-4. Adjusting the steering wheel and mirrors
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3
Be
fore
dri
ving
give a better view of the ground.
To disable this function, move the mirror
select switch to the neutral position
(between “L” or “R”)
With the shift lever in R, adjust the mirror
angle to a desired position to set the mirror
angle used when the vehicle is reversing.
The adjusted angle will be memorized and
the mirror will automatically tilt to the mem-
orized angle whenever the shift lever is
shifted to R from next time.
The memorized downward tilt position of
the mirror is linked to the normal position
(angle adjusted with the shift lever in other
than R). Therefore, if the normal position is
changed after adjustment, the tilt position
will also change.
When the normal position is changed, read-
just the angle in reversing.
When used in cold weather, the door mirror
could be frozen and may not automatically
point the mirror surface downward. In this
event, remove any ice and snow from the
mirror surface.
1
Folds the mirrors
2
Extends the mirrors
Putting the outside rear view mirror folding
switch in the neutral position sets the mir-
rors to automatic mode. Automatic mode
allows the folding or extending of the mir-
rors to be linked to locking/unlocking of
the doors.
■
When using in cold weather
When automatic mode is used in cold
weather, the door mirror could freeze up
and automatic stowing and return may not
be possible. In this event, after removing any
ice and snow from the door mirror, operate
the mirror using manual mode or move it by
hand.
■
Customization
The automatic mirror folding and extending
operation can be changed. (Customizable
features:
Folding and extending the mir-
rors
WARNING
■
When a mirror is moving
To avoid personal injury and mirror mal-
function, be careful not to get your hand
caught by the moving mirror.
128
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3-5.Opening, closing the windows and moon roof
The power windows can be opened
and closed by a one-touch operation of
the switches.
1
Closing
2
One-touch closing
*
3
Opening
4
One-touch opening
*
*
: To stop the window partway, operate the
switch in the opposite direction.
■
The power windows can be operated
when
The engine switch is in IGNITION ON
mode.
■
Operating the power windows after
turning the engine off
The power windows can be operated for
approximately 45 seconds even after the
engine switch is turned to ACCESSORY
mode or turned off. They cannot, however,
be operated once either front door is
opened.
■
Jam protection function
If an object becomes jammed between the
window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
■
Catch protection function
If an object becomes caught between the
door and window while the window is open-
ing, window movement is stopped.
■
When the window cannot be opened or
closed
When the jam protection function or catch
protection function operates unusually and
the door window cannot be opened or
closed, perform the following operations
with the power window switch of that door.
●
Stop the vehicle. With the engine switch
in IGNITION ON mode, within 4 sec-
onds of the jam protection function or
catch protection function activating, con-
tinuously operate the power window
switch in the one-touch closing direction
or one-touch opening direction so that
the door window can be opened and
closed.
●
If the door window cannot be opened
and closed even when performing the
above operations, perform the following
procedure for function initialization.
1
Turn the engine switch to IGNITION
ON mode.
2
Pull and hold the power window switch
in the one-touch closing direction and
completely close the door window.
3
Release the power window switch for a
moment, resume pulling the switch in
the one-touch closing direction, and
hold it there for approximately 6 sec-
onds or more.
4
Press and hold the power window
switch in the one-touch opening direc-
tion. After the door window is com-
pletely opened, continue holding the
switch for an additional 1 second or
more.
5
Release the power window switch for a
moment, resume pushing the switch in
the one-touch opening direction, and
hold it there for approximately 4 sec-
onds or more.
6
Pull and hold the power window switch
in the one-touch closing direction
again. After the door window is com-
pletely closed, continue holding the
switch for a further 1 second or more.
Power windows
Opening and closing the power
windows
129
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3
Be
fore
dri
ving
If you release the switch while the window is
moving, start again from the beginning.
If the window reverses and cannot be fully
closed or opened, have the vehicle
inspected by your Lexus dealer.
■
Door lock linked window operation
●
The power windows can be opened and
closed using the mechanical key.
*
(
●
The power windows can be opened using
the wireless remote control.
*
(
*
: These settings must be customized at
your Lexus dealer.
■
Power windows open warning buzzer
The buzzer sounds and a message is shown
on the multi-information display in the
instrument cluster when the engine switch
is turned off and the driver’s door is opened
with the power windows open.
■
Customization
Setting (e.g. linked door lock operation) can
be changed.
(Customizable features:
This function is designed to prevent
children from accidentally opening or
closing a passenger window.
Press the switch down to lock the pas-
senger window.
WARNING
Observe the following precautions.
Failing to do so may result in death or
serious injury.
■
Closing the windows
●
The driver is responsible for all the
power window operations, including
the operation for the passengers. In
order to prevent accidental operation,
especially by a child, do not let a child
operate the power windows. It is possi-
ble for children and other passengers
to have body parts caught in the power
window. Also, when riding with a child,
it is recommended to use the window
lock switch. (
●
Check to make sure that all passen-
gers do not have any part of their body
in a position where it could be caught
when a window is being operated.
●
When using the wireless remote con-
trol or mechanical key and operating
the power windows, operate the
power window after checking to make
sure that there is no possibility of any
passenger having any of their body
parts caught in the window. Also do
not let a child operate window by the
mechanical key. It is possible for chil-
dren and other passengers to get
caught in the power window.
●
When exiting the vehicle, turn the
engine switch off, carry the key and
exit the vehicle along with the child.
There may be accidental operation,
due to mischief, etc., that may possibly
lead to an accident.
■
Jam protection function
●
Never use any part of your body to
intentionally activate the jam protec-
tion function.
●
The jam protection function may not
work if something gets jammed just
before the window is fully closed. Be
careful not to get any part of your body
jammed in the window.
■
Catch protection function
●
Never use any part of your body or
clothing to intentionally activate the
catch protection function.
●
The catch protection function may not
work if something gets caught just
before the window is fully opened. Be
careful not to get any part of your body
or clothing caught in the window.
Preventing accidental operation
(window lock switch)
130
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
*
: If equipped
■
Opening and closing
1
Open
Press and hold the “OPEN” switch. The
moon roof tilts up and then fully opens
automatically.
*
2
Close
Press and hold the “CLOSE” switch. The
moon roof fully closes automatically.
*
*
: Lightly press either end of the moon roof
open/close switch to stop the moon roof
while it is operating.
Moon roof
*
For comfortable cabin experience,
the ceiling (moon roof) can be
opened or tilted up.
WARNING
■
Opening the moon roof
Observe the following precautions.
Failing to do so may cause death or seri-
ous injury.
●
Do not allow any passengers to put
their hands or heads outside the vehi-
cle while it is moving.
●
Do not sit on top of the moon roof.
Operation instructions
131
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3
Be
fore
dri
ving
■
Tilting up and down
1
Tilt up
Press and hold the “UP” switch. It automat-
ically opens until the tilt up stop position.
*
2
Tilt down
Press and hold the “DOWN” switch. The
moon roof full close automatically.
*
*
: Lightly press either end of the moon roof
switch to stop the moon roof while it is
operating.
■
The moon roof can be operated when
The engine switch is in IGNITION ON
mode.
■
Jam protection function
If an object is detected between the moon
roof and the frame while the moon roof is
closing or tilting down, travel is stopped and
the moon roof opens slightly.
■
Sunshade
The sunshade can be opened and closed
manually. However, the sunshade will open
automatically when the moon roof is
opened.
■
When the moon roof does not close nor-
mally
Perform the following procedure:
●
If the moon roof closes but then re-opens
slightly
1
Stop the vehicle.
2
Press and hold the “CLOSE” switch.
*1
The moon roof will close, reopen and pause
for approximately 10 seconds.
*2
Then it will close again and tilt down. Finally
it will stop.
3
Check to make sure that the moon roof
completely stops and then release the
switch.
●
If the moon roof tilts down but then tilts
back up
1
Stop the vehicle.
2
Press and hold the “DOWN” switch.
*1
The moon roof will close, reopen and pause
for approximately 10 seconds in the tilt up
position.
*2
Then it will close again. Finally it
will stop.
3
Check to make sure that the moon roof
has completely stopped and then
release the switch.
*1
: If the switch is released at the incorrect
time, the procedure will have to be per-
formed again from the beginning.
*2
: If the switch is released after the above
mentioned 10 second pause, automatic
operation will be disabled. In that case,
perform the moon roof initialization by
referring to “When tilt up/down or moon
roof opening and closing can be done
but automatic full opening and closing
cannot be done” on P.131.
If the moon roof does not fully close even
after performing the above procedure cor-
rectly, have the vehicle inspected by your
Lexus dealer.
■
When the moon roof does not move
normally
When the opening and closing operation or
automatic opening function of the moon
roof does not move normally, perform the
following initialization procedures.
1
Turn the engine switch to IGNITION
ON mode.
2
Operate the moon roof.
The initialization method changes depend-
ing on the contents that can be operated.
●
If only the tilt up operations can be done
when the moon roof is closed
3
Press and hold the “DOWN” or
“CLOSE” switch.
132
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
Open until the tilt up stop position. After
that the moon roof opens and completely
closes.
After that tilt up once again and stop at the
completely closed position.
4
Confirm that moon roof has completely
stopped and release the switch.
●
If the moon roof can only be closed when
the moon roof is partially opened
3
Press and hold the “DOWN” or
“CLOSE” switch.
Fully close the moon roof, tilt up and open it
close to the fully open position. After that,
fully close the moon roof and tilt up once
again, then stop the moon roof in the fully
closed position.
4
Confirm that moon roof has completely
stopped and release the switch.
●
When tilt up/down or moon roof opening
and closing can be done but automatic
full opening and closing cannot be done
3
Press the “OPEN” switch and fully
open.
4
Press the “CLOSE” switch and fully
close.
5
Press the “UP” switch and tilt up until
the tilt up stop position.
6
Press the “DOWN” switch and tilt
down.
If the switch is released before any step is
completes, the procedure will have to be
performed again from the beginning.
If the opening and closing operations or
automatic opening function does not move
as normal, even after performing the above
mentioned operations, have the vehicle
inspected by your Lexus dealer.
■
Moon roof open warning buzzer
The buzzer sounds and a message is shown
on the multi-information display in the
instrument cluster when the engine switch
is turned off and the driver’s door is opened
with the moon roof open.
■
Door lock linked moon roof operation
●
The moon roof can be opened and
closed using the mechanical key.
*
(
●
The moon roof can be opened using the
wireless remote control.
*
(
*
: These settings must be customized at
your Lexus dealer.
WARNING
Observe the following precautions.
Failing to do so may cause death or seri-
ous injury.
■
Closing the moon roof
●
The driver is responsible for moon roof
opening and closing operations.
In order to prevent accidental opera-
tion, especially by a child, do not let a
child operate the moon roof. It is possi-
ble for children and other passengers
to have body parts caught in the moon
roof.
●
Check to make sure that all passen-
gers do not have any part of their body
in a position where it could be caught
when the moon roof is being operated.
●
When using the wireless remote con-
trol or mechanical key and operating
the moon roof, operate the moon roof
after checking to make sure that there
is no possibility of any passenger hav-
ing any of their body parts caught in
the moon roof. Also, do not let a child
operate moon roof by the mechanical
key. It is possible for children and other
passengers to get caught in the moon
roof.
●
When exiting the vehicle, turn the
engine switch off, carry the key and
exit the vehicle along with the child.
There may be accidental operation,
due to mischief, etc., that may possibly
lead to an accident.
■
Jam protection function
●
Never use any part of your body to
intentionally activate the jam protec-
tion function.
133
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
3
Be
fore
dri
ving
WARNING
●
The jam protection function may not
work if something gets caught just
before the moon roof is fully closed.
Also, the jam protection function is not
designed to operate while the moon
roof switch is being pressed. Take care
so that your fingers, etc. do not get
caught.
134
3-5. Opening, closing the windows and moon roof
LEXUS NX300 Owners Manu-
al_USA_M78285_en
135
LEXUS NX300 Owners Manu-
al_USA_M78285_en
4
4
Driving
Driving
4-1. Before driving
Driving the vehicle. . . . . .
Cargo and luggage. . . . ...
Vehicle load limits. . . . . ..
Trailer towing (vehicles with tow-
ing package). . . . . . . ..
Trailer towing (vehicles without
towing package). . . . . ..
Dinghy towing . . . . . . . .
4-2. Driving procedures
Engine (ignition) switch . . ...
Automatic transmission. . ...
Turn signal lever. . . . . . ..
Parking brake . . . . . . . ..
Brake Hold. . . . . . . . .
ASC (Active Sound Control)
4-3. Operating the lights and wipers
Headlight switch. . . . . . .
Automatic High Beam. . . ..
Fog light switch . . . . . . ...
Windshield wipers and washer
. . . . . . . . . . . . . . .
Rear window wiper and washer
. . . . . . . . . . . . . . .
4-4. Refueling
Opening the fuel tank cap. ...
4-5. Using the driving support sys-
tems
Lexus Safety System+ . . . ..
PCS (Pre-Collision System) .
LDA (Lane Departure Alert with
steering control). . . . . ..
Dynamic radar cruise control with
full-speed range. . . . . ..
PKSA (Parking Support Alert)
. . . . . . . . . . . . . . .
Intuitive parking assist. . . ..
Parking Support Brake function
(for static objects). . . . ...
BSM (Blind Spot Monitor). .
Driving mode select switch ..
Driving assist systems. . . ..
All-wheel drive lock switch (AWD
models). . . . . . . . . ...
4-6. Driving tips
Winter driving tips. . . . . .
Utility vehicle precautions. .
136
4-1. Before driving
LEXUS NX300 Owners Manu-
al_USA_M78285_en
4-1.Before driving
■
Starting the engine
■
Driving
1
With the brake pedal depressed,
shift the shift lever to D. (
2
Release the parking brake.
(
If the parking brake is in automatic mode,
the parking brake is released automatically
when shifting the shift lever to any position
other than P. (
3
Gradually release the brake pedal
and gently depress the accelerator
pedal to accelerate the vehicle.
■
Stopping
1
With the shift lever in D, depress the
brake pedal.
2
If necessary, set the parking brake.
(
If the vehicle is to be stopped for an
extended period of time, shift the shift lever
to P or N. (
■
Parking the vehicle
1
With the shift lever in D, depress the
brake pedal.
2
Set the parking brake (
and shift the shift lever to P
(
P.158).
3
Press the engine switch to stop the
engine.
4
Lock the door, making sure that you
have the electronic key on your
person.
If parking on a hill, block the wheels as
needed.
■
Starting off on an uphill
1
With the brake pedal depressed,
shift the shift lever to D. (
2
Pull the parking brake switch and
parking brake is set manually.
(
3
Release the brake pedal and gently
depress the accelerator pedal to
accelerate the vehicle.
4
Press the parking brake switch and
parking brake is released manually.
(
■
When starting off on an uphill
The hill-start assist control will activate.
(
■
Driving in the rain
●
Drive carefully when it is raining, because
visibility will be reduced, the windows
may become fogged-up, and the road
will be slippery.
●
Drive carefully when it starts to rain,
because the road surface will be espe-
cially slippery.
●
Refrain from high speeds when driving on
an expressway in the rain, because there
may be a layer of water between the tires
and the road surface, preventing the
steering and brakes from operating prop-
erly.
■
Engine speed while driving
In the following conditions, the engine
speed may become high while driving. This
is due to automatic up-shifting control or
down-shifting implementation to meet driv-
ing conditions. It does not indicate sudden
acceleration.
●
The vehicle is judged to be driving uphill
Driving the vehicle
The specified procedures should be
observed to ensure safe driving:
Driving procedure
137
4-1. Before driving
LEXUS NX300 Owners Manu-
al_USA_M78285_en
4
Driving
or downhill
●
When the accelerator pedal is released
●
When the brake pedal is depressed while
Sport mode is selected
■
Restraining the engine output (Brake
Override System)
●
When the accelerator and brake pedals
are depressed at the same time, the
engine output may be restrained.
●
A warning message is displayed on the
multi-information display while the sys-
tem is operating.
■
Restraining sudden start (Drive-Start
Control)
●
When the following unusual operation is
performed, the engine output may be
restrained.
• When the shift lever is shifted from R to D,
D to R, N to R, P to D, or P to R (D
includes M) with the accelerator pedal
depressed, a warning message appears
on the multi-information display. If a
warning message is shown on the multi-
information display, read the message
and follow the instructions.
• When the accelerator pedal is depressed
too while the vehicle is in reverse.
●
While Drive-Start Control is being acti-
vated, your vehicle may have trouble
escaping from the mud or fresh snow. In
such case, deactivate TRAC (
to cancel Drive-Start Control so that the
vehicle may become able to escape from
the mud or fresh snow.
■
Breaking in your new Lexus
To extend the life of the vehicle, observing
the following precautions is recommended:
●
For the first 200 miles (300 km):
Avoid sudden stops.
●
For the first 1000 miles (1600 km):
• Do not drive at extremely high speeds.
• Avoid sudden acceleration.
• Do not drive continuously in low gears.
• Do not drive at a constant speed for
extended periods.
●
For the first 500miles (800 km):
Do not tow a trailer. (vehicles with towing
package)
■
Operating your vehicle in a foreign
country
Comply with the relevant vehicle registra-
tion laws and confirm the availability of the
correct fuel. (
■
Idling time before engine stop
To prevent damage to the turbocharger,
allow the engine to idle immediately after
high-load driving.
■
Eco-friendly driving
P.68
Driving condition
Idling time
Normal city driving or high-
speed driving (at the highway
speed limit or recommended
speed)
Not neces-
sary
Steep hill driving, continuous
driving (race track driving,
etc.), or towing a trailer or
another vehicle (vehicles with
towing package)
Approxi-
mately 1
minute
WARNING
Observe the-following precautions.
Failure to do so may result in death or
serious injury.
■
When starting the vehicle
Always keep your foot on the brake
pedal while stopped engine running. This
prevents the vehicle from creeping.
138
4-1. Before driving
LEXUS NX300 Owners Manu-
al_USA_M78285_en
WARNING
■
When driving the vehicle
●
Do not drive if you are unfamiliar with
the location of the brake and accelera-
tor pedals to avoid depressing the
wrong pedal.
• Accidentally depressing the accelera-
tor pedal instead of the brake pedal
will result in sudden acceleration that
may lead to an accident.
• When backing up, you may twist your
body around, leading to difficulty in
operating the pedals. Make sure to
operate the pedals properly.
• Make sure to keep a correct driving
posture even when moving the vehicle
only slightly. This allows you to depress
the brake and accelerator pedals
properly.
• Depress the brake pedal using your
right foot. Depressing the brake pedal
using your left foot may delay
response in an emergency, resulting in
an accident.
●
Do not drive the vehicle over or stop
the vehicle near flammable materials.
The exhaust system and exhaust gases
can be extremely hot. These hot parts
may cause a fire if there is any flamma-
ble material nearby.
●
During normal driving, do not turn off
the engine. Turning the engine off
while driving will not cause loss of
steering or braking control, but the
power assist to these systems will be
lost. This will make it more difficult to
steer and brake, so you should pull
over and stop the vehicle as soon as it
is safe to do so.
In the event of an emergency, such as if
it becomes impossible to stop the vehi-
cle in the normal way:
●
Use engine braking (downshift) to
maintain a safe speed when driving
down a steep hill.
Using the brakes continuously may
cause the brakes to overheat and lose
effectiveness. (
●
Do not adjust the positions of the
steering wheel, the seat, or the inside
or outside rear view mirrors while driv-
ing.
Doing so may result in a loss of vehicle
control.
●
Always check that all passengers’
arms, heads or other parts of their
body are not outside the vehicle.
●
AWD models: Do not drive the vehicle
off-road.
This is not an AWD vehicle designed
for off-road driving. Proceed with all
due caution if it becomes unavoidable
to drive off-road.
●
Do not drive across a river or through
other bodies of water.
This may cause electric/electronic
components to short circuit, damage
the engine or cause other serious
damage to the vehicle.
●
Do not drive in excess of the speed
limit. Even if the legal speed limit per-
mits it, do not drive over 85 mph (140
km/h) unless your vehicle has high-
speed capability tires.
Driving over 85 mph (140 km/h) may
result in tire failure, loss of control and
possible injury. Be sure to consult a tire
dealer to determine whether the tires
on your vehicle are high-speed capa-
bility tires or not before driving at such
speeds.
■
When driving on slippery road sur-
faces
●
Sudden braking, acceleration and
steering may cause tire slippage and
reduce your ability to control the vehi-
cle.
●
Sudden acceleration, engine braking
due to shifting, or changes in engine
speed could cause the vehicle to skid.
139
4-1. Before driving
LEXUS NX300 Owners Manu-
al_USA_M78285_en
4
Driving
WARNING
●
After driving through a puddle, lightly
depress the brake pedal to make sure
that the brakes are functioning prop-
erly. Wet brake pads may prevent the
brakes from functioning properly. If the
brakes on only one side are wet and
not functioning properly, steering con-
trol may be affected.
■
When shifting the shift lever
●
Do not let the vehicle roll backward
while the shift lever is in a driving posi-
tion, or roll forward while the shift lever
is in R.
Doing so may cause the engine to stall
or lead to poor brake and steering
performance, resulting in an accident
or damage to the vehicle.
●
Do not shift the shift lever to P while
the vehicle is moving.
Doing so can damage the transmission
and may result in a loss of vehicle con-
trol.
●
Do not shift the shift lever to R while
the vehicle is moving forward.
Doing so can damage the transmission
and may result in a loss of vehicle con-
trol.
●
Do not shift the shift lever to a driving
position while the vehicle is moving
backward.
Doing so can damage the transmission
and may result in a loss of vehicle con-
trol.
●
Shifting the shift lever to N while the
vehicle is moving will disengage the
engine.
Engine braking is not available when N
is selected.
●
Be careful not to shift the shift lever
with the accelerator pedal depressed.
Shifting the shift lever to any position
other than P or N may lead to unex-
pected rapid acceleration of the vehi-
cle that may cause an accident and
result in death or serious injury.
■
If you hear a squealing or scraping
noise (brake pad wear limit indica-
tors)
Have the brake pads checked and
replaced by your Lexus dealer as soon as
possible. Rotor damage may result if the
pads are not replaced when needed.
It is dangerous to drive the vehicle when
the wear limits of the brake pads and/or
those of the brake discs are exceeded.
■
When the vehicle is stopped
●
Do not race the engine.
If the shift lever is in any position other
than P or N, the vehicle may acceler-
ate suddenly and unexpectedly, caus-
ing an accident.
●
In order to prevent accidents due to
the vehicle rolling away, always keep
depressing the brake pedal while the
engine is running, and apply the park-
ing brake as necessary.
●
If the vehicle is stopped on an incline,
in order to prevent accidents caused
by the vehicle rolling forward or back-
ward, always depress the brake pedal
and securely apply the parking brake
as needed.
●
Avoid revving or racing the engine.
Running the engine at high speed
while the vehicle is stopped may cause
the exhaust system to overheat, which
could result in a fire if combustible
material is nearby.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст