Lexus LS400 (2000 year). Service manual — part 17
N13462
4
9
BE0CG–01
BE1239
I03433
Not turned
Unlock
BE–150
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
2013
INSPECTION
1.
INSPECT RHEOSTAT LIGHT CONTROL VOLUME OP-
ERATION
Connect the positive (+) lead from the battery to terminal 4 and
negative (–) lead to terminal 9, and check that the warning light
lights up.
If operation is not as specified, replace the rheostat light control
volume.
2.
INSPECT RHEOSTAT LIGHT CONTROL VOLUME CIR-
CUIT (See page
3.
INSPECT HORN OPERATION
Connect positive (+) lead to terminal 1 and negative (–) lead to
terminal 2 of theft deterrent horn connector, and that the theft
deterrent horn blows.
If operation is not as specified, replace the horn.
4.
INSPECT HORN CIRCUIT (See page
5.
LUGGAGE COMPARTMENT DOOR KEY LOCK AND
UNLOCK SWITCH CONTINUITY
Switch position
Tester connection
Specified condition
Not turned
–
No continuity
UNLOCK
1 – 2
Continuity
If continuity is not as specified, replace the switch.
If continuity is as specified, inspect the switch circuit.
6.
LUGGAGE COMPARTMENT DOOR KEY LOCK AND
UNLOCK SWITCH CIRCUIT (See page
)
I04893
ON
OFF
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
BE–151
2014
7.
ENGINE HOOD COURTESY SWITCH CONTINUITY
Switch position
Tester connection
Specified condition
LOCK
–
No continuity
UNLOCK
1 – 2
Continuity
If continuity is not as specified, replace the switch.
If continuity is as specified, inspect the switch circuit.
8.
ENGINE HOOD COURTESY SWITCH CIRCUIT
(See page
BE0CH–01
I03443
Engine Room Junction Block
ECU–B Fuse
Transmitter
Wireless Door Lock ECU
Wireless Door Lock
Buzzer
Door Outside
Handle
Body ECU
Ignition Switch
Key Unlock Warning Switch
Wireless Door Lock
Buzzer Cancel Switch
BE–152
–
2015
WIRELESS DOOR LOCK CONTROL SYSTEM
LOCATION
BE0CI–01
–
BODY ELECTRICAL
WIRELESS DOOR LOCK CONTROL SYSTEM
BE–153
2016
PRE–CHECK
Make the vehicle in the initialized condition:
The initialized condition is the condition when the following conditions are satisfied.
(1) Key plate has not been inserted in the ignition key cylinder.
(2) All the doors are closed. (Door warning light is off.)
(3) All the doors are locked.
(4) Wireless door lock control switch (Buzzer switch) is ON.
Under the standard operation, when repeating the operation of UNLOCK and LOCK switch 3 times or more alter-
nately, check the UNLOCK–LOCK operation from 3rd time onward.
Following procedures are standard operation.
(1) Keep about 1 M away to the right direction from the outside handle of a driver’s seat.
(2) Face the transmitter toward the vehicle and press one of transmitter switches for about 1 sec.
<Reference>
As of the security function, even the wireless function is normal, there may be the case that only UNLOCK opera-
tion will not work.
As of the UNLOCK operation times adjustment function of body customize function, when using LEXUS hand–
held tester to set ”operation twice”, only driver’s seat is unlocked by unlock operation performed once.
Normal
<Reference>
Operative distance may differ according to
an operator, the way of holding the transmitter
or position.
Because weak electric wave is used, when
there is strong wave or noise in the used
frequency ,operation distance might be
shortened.
No
Yes
Only wireless function (Remote control) will not operate.
(If a new transmitter or a transmitter of the same type that works properly with the vehicle is not available.)
Check when pressing UNLOCK switch
and LOCK switch under standard
operation, that the transmitter LED
lights up one more once.
No
Yes
Basic function check:
Transmitter LED inspection:
1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст